S50 铁路车辆综合 标准查询与下载
共找到 306 条与 铁路车辆综合 相关的标准，共 21 页
本规程适用于铁路货车和客车列车尾部安全防护装置主机检测台(以下简称检测台)的首次检定、后续检定和使用中检查。
Detection Stations of the End-of-train Safety Equipment Host
- ICS
- CCS
- S50
- 发布
- 2014-06-15
- 实施
- 2014-09-15
Railway applications - Suspension components - Hydraulic dampers; German version EN 13802:2013
- ICS
- 45.040
- CCS
- S50
- 发布
- 2014-03
- 实施
Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: freight wagons
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2013-11-16
- 实施
- 2013-11-16
本标准规定了轨道车辆用单组份聚氨酯密封胶的性能要求、检验方法。本标准适用于轨道车辆及相关结构各种接缝用单组份聚氨酯密封胶的质量控制。
Specifications for one-component polyurethane sealant for rail vehicles
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2013/02/20
- 实施
- 2013/02/20
Railway applications. Energy measurement on board trains. General
- ICS
- 45.060.10
- CCS
- S50
- 发布
- 2013-01-31
- 实施
- 2013-01-31
This European Standard defines the process to determine the conditions under which dispensation from on-track testing according to EN 14363 can be given to freight wagons. In its application this document specifies the means by which dispensation from on-track tests is possible. This European Standard is subordinate to EN 14363. This European Standard is not limited to any type of freight vehicle; however certain types, which have been previously accepted under the auspices of UIC, are considered to have a continuing dispensation from on-track testing. These freight vehicles are detailed within this document. The dispensation conditions described in this document apply to all freight vehicles used in international, multilateral or national rail freight transportation, which operate without restriction on standard gauge tracks (1435 mm). The various rail-inclinations used in Europe (1:20, 1:40 and 1:30) are covered by the conditions for dispensation. NOTE The test procedures described in this standard (and in EN 14363) can be applied also to applications with other track gauges e. g. 1524 mm or 1668 mm. The limit values could be different, as the details of such networks are not known by the authors of this standard. If established running gear are existing in such restricted networks the related ranges of running gear and vehicle parameters for dispensation from on-track tests might be specified together with the operational parameters (speed, cant deficiency, maximum axle load) based on previous tests and operating experiences. These limit values and parameters will be specified under national responsibility. This European Standard only contains requirements for characteristics related to requirements for on-track tests specified in EN 14363.
Railway application - Testing for the acceptance of running characteristics of railway vehicles - Freight wagons - Conditions for dispensation of freight wagons with defined characteristics from on-track tests according to EN 14363
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2013
- 实施
- 2023-03-21
This part of the European Standard identifies the information required or recommended to be marked on coaches, motive power units, locomotives and On Track Machines, relating to their technical and operational characteristics. It defines the characteristics of these markings, the requirements pertaining to their presentation, their shape and position on a vehicle and their meaning. Some markings are accompanied with note(s) where appropriate. Service markings relating to passenger information are not addressed by this standard. The provisions of this standard cover external markings on vehicles as required by: the TSIs; the COTIF regulations. In addition to the markings shown in this European Standard, there might be other markings and text applied to these vehicles, e. g. instructions and warnings concerning the use of equipment specific to the vehicle. Such additional markings are not in contravention of this standard provided they do not interfere with, create ambiguity or in any other way affect the markings in this standard. This European Standard is applicable to all railway motive power units, coaches, baggage and mail vans and car carrying coaches intended to be included in passenger trains, locomotives and On Track Machines operating within and between Member States of the European Union, the European Economic Area Member States and States which are member of OTIF (Intergovernmental Organisation for International Carriage by Rail) and it satisfies the legal requirements within these institutions.
Railway applications - Markings of railway vehicles - Part 2: External markings on coaches@ motive power units@ locomotives and on track machines
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2013
- 实施
- 2013
This European Standard specifies the interface requirements for water restocking equipment, and the on board system to preserve the quality of the water supply. It is applicable to railway vehicles fitted with water taps for use in toilets, washing facilities, water dispensers and catering equipment and the railway infrastructure at designated servicing sites. This European Standard is not applicable to filling railway vehicles with water for the purpose of engine cooling, steam heating or work equipment on on-track machines.
Railway applications - Ground based services - Water restocking equipment
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2013
- 实施
- 2013-12-01
本标准规定了城市轨道交通钢铝复合导电轨的术语和定义、材料、规格、要求、检验规则和试验方法、标志、包装、运输和贮存、质量保证与质量证明书等。 本标准适用于城市轨道交通牵引供电系统钢铝复合导电轨的设计、生产、试验和验收等。
Technical requirements of aluminum-steel conductor rail for urban rail transit
- ICS
- 03.220.30
- CCS
- S50
- 发布
- 2012-12-06
- 实施
- 2013-04-01
Railway applications.Marking on railway vehicles.Part 1: Freight wagons; German version EN 15877-1:2012
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2012-12
- 实施
本标准规定了铁路货车用碳素钢铸钢车轮型式尺寸极限偏差及公差、技术要求、检验方法、检验规则、标记、包装、运输及质量证明书等。本标准适用于运行速度小于或等于120 km/h的铁路货车用碳素钢铸钢车轮。
Carbon cast steel wheel
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2012-09-11
- 实施
- 2013-01-01
State of railway vehicles - Passenger area - Part 9: Emergency exit windows
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2012-09
- 实施
- 2012-09-01
State of railway vehicles - Passenger area - Part 10: Vehicle related entrance devices
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2012-09
- 实施
- 2012-09-01
Railway applications. Marking on railway vehicles. Freight wagons
- ICS
- 45.060.20
- CCS
- S50
- 发布
- 2012-07-31
- 实施
- 2012-07-31
State of railway vehicles - Basic principles and production technology - Part 11: Procedure for preparation of fault tolerance concept
- ICS
- 45.060.01
- CCS
- S50
- 发布
- 2012-06-01
- 实施
- 2012-06-01
State of railway vehicles - Basic principles and production technology - Part 2: Proof of maintenance
- ICS
- 45.060.01
- CCS
- S50
- 发布
- 2012-02-01
- 实施
- 2012-02-01
State of railway vehicles - Basic principles and production technology - Part 3: Test run
- ICS
- 45.060.01
- CCS
- S50
- 发布
- 2012-02-01
- 实施
- 2012-02-01
State of the railway vehicles - Control and instrumentation technology - Part 207-7: On-board equipment - LZB (continuous automatic train-running control)
- ICS
- 45.060.10
- CCS
- S50
- 发布
- 2011-11
- 实施
- 2011-11-01
Railway rolling stock -- Test methods of ventilation (Amendment 1)
- ICS
- 45.060.01
- CCS
- S50
- 发布
- 2011-09-07
- 实施
本标准规定了中低速磁浮交通车辆的使用条件、车辆主要技术规格、基本要求、车辆型式与列车编组、车体及其内装设备、磁浮走行部、电气系统、牵引系统、悬浮导向系统、制动系统、供风系统、控制与诊断系统、测速定位系统、空调与通风系统、通讯与乘客信息系统、安全设施、试验与验收、标志、运输与质量保证期限等方面的内容。 本标准适用于中低速磁浮交通车辆。
General technical specification for medium and low speed maglev vehicles
- ICS
- 03.220.30
- CCS
- S50
- 发布
- 2011-08-09
- 实施
- 2012-02-01
