S90 铁路运输综合 标准查询与下载
共找到 92 条与 铁路运输综合 相关的标准，共 7 页
本标准规定了铁路调车简易驼峰作业的程序、项目、内容、作业人员、技术要求等。 本标准适用于国家铁路、地方铁路、专用铁路简易驼峰解体列车及下峰技术作业。
The operating standard for railway shunting. Railway shunting the operating standard for the simple hump
- ICS
- 45.020
- CCS
- S90
- 发布
- 1996-03-15
- 实施
- 1996-08-01
本标准规定了铁路调车机械（半自动）化驼峰作业的程序、项目、内容、作业人员、技术要求。 本标准适用于国家铁路、地方铁路、专用铁路机械（半自动）化驼峰解体列车及下峰技术作业。
The operating standard for railway shunting. Railway shunting the operating standard for the mechanized hump
- ICS
- 45.020
- CCS
- S90
- 发布
- 1996-03-15
- 实施
- 1996-08-01
本标准规定了铁路调车准备作业的程序、项目、内容、作业人员、技术要求等。 本标准适用于国家铁路、地方铁路、专用铁路的调车作业。
The operating standard for failway shunting. Ralway shunting the standard for preparing operation
- ICS
- 45.020
- CCS
- S90
- 发布
- 1996-03-15
- 实施
- 1996-08-01
本标准规定了在铁路运输过程中，平、敞车及长大货物车上所装货物单位质量的纵向惯性力、横向惯性力及垂直惯性力的计算方法。 本标准适用于准轨铁路平、敞车及长大货物车装载货物的加固强度设计计算。
Calculation of value of inertial forces of goods in railway transportation
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 1995-05-22
- 实施
- 1996-01-01
本标准规定了有关铁路旅客运输组织的常用术语。 本标准适用于国家铁路、地方铁路、专用铁路及铁路专用线旅客运输组织的生产管理、设计、科研、教学、出版等。
Terminology for railway passenger transport
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 1991-12-13
- 实施
- 1992-08-01
本标准规定了铁路三级三场编组站到发线通过能力及其影响因素的计算方法、取值范围等。 本标准适用于国家铁路三级三场编组站到发线通过能力的查定，同时也可供地方铁路、专用铁路确定编组站到发线通过能力的参考。 使用本标准进行设计时，应采用能力的低限值确定线路数，并附加一定的后备量。
Calculated methods of carrying capacity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard)
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 1991-10-31
- 实施
- 1992-07-01
本标准规定了有关铁路行车组织工作常用名词术语的涵义。 本标准适用于国家铁路、地方铁路及工矿企业专用铁路行车组织的生产管理、设计、科研、教学、出版等方面。
Terminology for train operation
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 1988-01-04
- 实施
- 1988-07-01
Controllable cargo train rear safety protection device and ancillary equipment
- ICS
- ICS03.220.30
- CCS
- S90
- 发布
- 2017-10-12
- 实施
- 2018-05-01
Railway applications. Line categories for managing the interface between load limits of vehicles and infrastructure
- ICS
- 03.220.30;45.060.20
- CCS
- S90
- 发布
- 2016-01-31
- 实施
- 2016-01-31
Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts (IEC 62290-1:2014); German version EN 62290-1:2014
- ICS
- 03.220.30;35.240.60
- CCS
- S90
- 发布
- 2015-06
- 实施
Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification (IEC 62290-2:2014); German version EN 62290-2:2014
- ICS
- 03.220.30;35.240.60
- CCS
- S90
- 发布
- 2015-06
- 实施
Railway applications. Requirements for ERTMS Trackside Boards
- ICS
- 03.220.30;33.070.50
- CCS
- S90
- 发布
- 2015-04-30
- 实施
- 2015-04-30
Railway applications - Urban guided transport management and command/control systems - Part 1 : system principles and fundamental concepts
- ICS
- 03.220.30;45.060.01;35.240.60
- CCS
- S90
- 发布
- 2014-11-29
- 实施
- 2014-11-29
本标准规定了铁路运输过程中，货物单位质量的纵向惯性力、横向惯性力及垂直惯性力的计算方法。本标准适用于装载于敞车、平车及长大货物车上，货物列车速度不超过120 km/h，调车连挂速度不超过5 km/h的标准轨距铁路运输货物的加固强度设计与计算。
Calculation of values of inertial force of goods in railway transportation
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 2014-10-30
- 实施
- 2015-05-01
Railway applications. Urban guided transport management and command/control systems. System principles and fundamental concepts
- ICS
- 35.240.60;45.020;45.060.01
- CCS
- S90
- 发布
- 2014-09-30
- 实施
- 2014-09-30
Railway applications. Urban guided transport management and command/control systems. Functional requirements specification
- ICS
- 45.060.01
- CCS
- S90
- 发布
- 2014-09-30
- 实施
- 2014-09-30
Railway applications - Urban guided transport management and command/control systems - Part 1: System principles and fundamental concepts
- ICS
- 03.220.30;35.240.60;45.060.01
- CCS
- S90
- 发布
- 2014-07-01
- 实施
This part of IEC 62290 specifies the functional requirements of UGTMSs (Urban Guided Transport Management and Command/Control Systems) for use in urban guided passenger transport lines and networks. This part of IEC 62290 is applicable for new lines or for upgrading existing signalling and command control systems. This part of IEC 62290 is applicable to applications using: ? continuous data transmission ? continuous supervision of train movements by train protection profile ? localisation of trains by external wayside equipment or reporting trains. This standard is not applicable to existing command and control systems or projects in progress prior to the effective date of this standard. In this Part 2 of the standard@ the functional requirements set the framework to which detailed functions should be added to define any generic or specific application. Because of that@ although this part of the standard is applicable as a basis to define SRS@ FIS and FFFIS@ elements may be added for a generic or specific application.
Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification
- ICS
- 03.220.30;35.240.60;45.060.01
- CCS
- S90
- 发布
- 2014-07-01
- 实施
- 2014-07-12
本标准规定了城轨电动列车司机（以下简称“司机”）安全操作的一般要求、作业前要求、作业要求和作业后要求。本标准适用于城轨电动列车司机的安全操作。
Code of safe operation for urban rail electric train drivers
- ICS
- 03.220.30
- CCS
- S90
- 发布
- 2012/06/01
- 实施
- 2012/06/01
Railway applications - Urban guided transport management and command/control systems - Part 2: Functional requirements specification (IEC 62290-2:2011); German version EN 62290-2:2011
- ICS
- 03.220.30;35.240.60
- CCS
- S90
- 发布
- 2012-05
- 实施
- 2012-05-01
