T05 专用材料及其制品 标准查询与下载

SAE J468-1988 锌合金锭和模的铸造成分

Zinc Alloy Ingot and Die Casting Compositions

Zinc Alloy Ingot and Die Casting Compositions

SAE J125-1988 锻铁的升温性能

The purpose of this SAE Information Report is to provide automotive engineers and designers with a concise statement of the basic characteristics of cast iron under elevated temperature conditions. As such, the report concentrates on general statements regarding these properties with limited illustrative data, anticipating that those who may be interested in more detail will want to use the bibliography provided at the conclusion of the report.

Elevated Temperature Properties of Cast Irons

JIS K 2399:1987 汽车用防雾剂

Road vehicles-antifogging agent

ISO 7881:1987 道路车辆.制动闸衬.摩擦材料特性的评定.小试样工作台试验程序

Road vehicles; Brake linings; Evaluation of friction material characteristics; Small sample bench test procedure

SAE J1852-1987 镀锌低碳薄钢板的属性及它们与成型性之间的关系的信息报告.1987年9月

This standard is specifies.Properties of Galvanized Low Carbon Sheet Steels and Their relation to Formability

Properties of Galvanized Low Carbon Sheet Steels and Their Relation to Formability, Information Report September 1987

SAE J1545-1986 外用罩面漆,织物和有色修剪的仪器色差测量的推荐性实施规程,1986年6月

The intent of this practice is to precisely specify procedures for instrumental color difference measurement of colored parts or colored materials incorporated in the manufacture of vehicles. The recommended practice provides a consistent engineering practice for determination of color difference, for numerical communication of color difference, and for determination of acceptance or rejection compared to numerical tolerances. The practice is intended to be used as a specification and means of communication for color part acceptance in a buyer-seller agreement. The practice applies to parts and materials used in vehicles manufacture which are intended to be acceptable color matches to a specified color standard. This practice is intended for use with parts or materials which are opaque or nearly so and does not apply to transparent materials. Materials covered by this practice include topcoat paint finishes, interior soft trim, and exterior hard trim, and exterior film.

Instrumental Color Difference Measurement for Exterior Finishes, Textiles and Colored Trim, Recommended Practice June 1986

SAE J474-1985 金属板术和相关成品

Electroplating is a process whereby an object is coated with one or more relatively thin, tightly adherent layers of one or more metals. It is accomplished by placing the object to be coated on a plating rack or a fixture, or in a basket or in a rotating container in such a manner that a suitable current may flow through it, and then immersing it in a series of solutions and rinses in planned sequence. The advantage to be gained by electroplating may be considerable; broadly speaking, the process is used when it is desired to endow the basis material (selected for cost, material conservation, and physical property reasons) with surface properties it does not possess. It should be noted that although electroplating is the most widely used process for applying metals to a substrate, they may also be applied by spraying, vacuum deposition, cladding, hot dipping, chemical reduction, mechanical plating, etc. The purpose for applying an electroplate and the metals used for various applications follow.

Electroplating and Related Finishes

SAE J207-1985 金属件.汽车装饰物和配件上的镍和铬电镀标准

This standard covers requirements for several types and grades of electrodeposited nickel/chromium coatings on ferrous or copper alloy basis metals and copper/nickel/chromium on zinc or aluminum alloys for the finishing and corrosion protection of decorative ornamentation and hardware of motor vehicles and marine controls and fittings. Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A.1 Information contained in this document generally conforms to the information contained in ASTM B 456, Specification for Electrodeposited Coatings of Nickel plus Chromium.

Electroplating of Nickel and Chromium on Metal Parts - Automotive Ornamentation and Hardware, Standard;

SAE J951-1985 佛罗里达汽车涂料暴露

Florida Exposure of Automotive Finishes

Florida Exposure of Automotive Finishes

ASTM A159-83(2015) 汽车灰铸铁件的标准规格

1.1 This specification applies to gray iron castings, cast in sand molds, used in the products of the automobile, truck, tractor, and allied industries. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Specification for Automotive Gray Iron Castings

SAE J462-1981 铸铜合金

This standard prescribes the chemical and mechanical requirements for a wide range of copper base casting alloys used in the automotive industry. It is not intended to cover ingot. (ASTM B30 is suggested for this purpose.)

Cast Copper Alloys

DIN 75200:1980 汽车内部设备用材料燃烧性能的测定

Determination of burning behaviour of interior materials in motor vehicles.Détermination du comportement de br?lement des matériaux à l'intérieur des véhicules à moteurZusammenhang mit der von der International Organization for Standardization (ISO) her

Determination of burning behaviour of interior materials in motor vehicles

ISO 3538:1978 道路车辆.安全玻璃.光学性能试验方法

Road vehicles; Safety glasses; Test methods for optical properties

SAE J1203-1977 汽车挡风玻璃安全镀锌材料的透光率推荐实施规程.1977年8月

The purpose of this test is to determine the light transmittance of automotive windshield safety glazing materials positioned at the angle of installation.

Light Transmittance of Automotive Windshields Safety Glazing Materials, Recommended Practice August 1977

SAE J470C-1976 锻造镍和镍制合金

This Report presents general information on over 50 alloys in which nickel either predominates or is a significant alloying element. It covers primarily wrought materials, and is not necessarily all inclusive. Values given are in most cases average or nominal, and if more precise values are required the producer(s) should be contacted. This report does not cover the so-called superalloys, or the iron base stainless steels. Refer to SAE J467, Special Purpose Alloys, and SAE J405, chemical compositions of SAE Wrought Stainless Steels, respectively, for data on these alloys.

Wrought Nickel and Nickel-Related Alloys

SAE HS-87-1973 纤维板.1973年2月;图像不包括在内,请参阅完整版

Among the topics covered are: Fiberboard Terminology; Test procedure; crease Bending Test; Flammability of Automotive Interior materials; and numerous test methods.

Fiberboards February 1973; IMAGES ARE NOT INCLUDED; PLEASE REFER TO GLOBAL

SAE J243-1971 机动型密封层,胶粘剂和消声材料试验方法

This SAE Recommended Practice contains a series of test methods for use in measuring characteristics of automotive- type sealers, adhesives, and deadeners. The test methods which are contained in this document are as follows: ADS-1--Methods of Determining Viscosity ADS-2--Low temperature Tests ADS-3--Weld-Through Tests ADS-4--Enamel, lacquer, and fabric Staining Test ADS-5--Wash-Off Resistance Test aDS-7--Solids Test aDS-8--Flash Point Test ADS-9--Sag and Bridging Tests ADS-10-Flow test the intent of this document is to provide a series of test methods which can be used in testing the various qualities of sealers, adhesives, and deadener material. In later revisions of this document, attempts will be made to reduce the number of tests now presented. The specific temperatures and times at which some of these tests are to be conducted are not dictated in these test procedures, but they will be found in the material standards which govern each type of material to be tested.

Methods of Tests for Automotive-Type Sealers, Adhesives, and Deadeners

SAE J438B-1970 工模具钢

This standard covers the identification, classification, and chemical composition of tool and die steels for use by engineers, metallurgists, tool designers, tool room supervisors, heat treaters, and tool makers.

Tool and Die Steels

SAE J467B-1968 专用合金

The data given in Tables 1-4 are typical values only and are not intended for design parameters. Mechanical properties of the special purpose alloys depend greatly upon processing variables and heat treatment. It is recommended that design data be obtained by actual testing or by consultation with the producers of the alloys.

Special Purpose Alloys

SAE J250-1959 不干型合成树脂塑料涂封物

The material desired under this recommended practice is a synthetic resin plastic sealer of the nondrying, nonbleeding, and noncorrosive type that may be extruded to the specified size and used as a medium for producing a water tight seal between 2 pressed steel sections or between rubber and steel.

Synthetic Resin Plastic Sealers, Nondrying Type