T23 转向与操纵系统 标准查询与下载

NF P99-400:1994 车载设备.驾驶员控制板.最小尺寸和功能特性

Bus and coasch on-board equipment. Driver'S control console. Minimum dimensional and functional characteristics.

SAE J1511-1994 橡胶轮胎越野机械的转向系统

This SAE Standard applies to off-road rubber-tired machines having rated speed capability exceeding 20 km/h. Only the following machine categories in SAE J1116 are included in the scope of this document. a. earthmoving; b. other than earthmoving: except rollers and compactors; c. general purpose industrial; d. forestry; and e. specialized mining machinery. Applicable steering systems include the following means of providing power for steering: a. manual steering; b. power-assisted steering; and c. full- power steering. This document does not imply that secondary steering is mandatory. However, if secondary steering is provided, performance and test requirements are included. This document specifies steering system performance and test criteria, including optional secondary steering systems, which enable uniform evaluation of the steering capability of rubber-tired, off-road work machines.

Steering for Off-Road, Rubber-Tired Machines

SAE J46-1993 车轮防滑制动系道路试验规则

This test code establishes wheel-slip brake-control system capabilities with regard to: 1.1 vehicle stability, maneuverability, and system function on various road surface conditions, including variable friction surfaces as well as uniform friction surfaces; 1.2 vehicle stopping distance on various road surface conditions; 1.3 not covered by this SAE Recommended Practice are: a. radio frequency interference testing and b. extensive power consumption testing. This document establishes a uniform procedure for the road test of wheel- slip brake-control systems on passenger cars, trucks, buses, and combination vehicles.

Wheel-Slip Brake-Control System Road Test Code

QC/T 29096-1992 汽车转向器总成台架试验方法

本标准规定了汽车转向器总成台架试验方法。 　　本标准适用于蜗杆滚轮式、循环球式、蜗杆指销式及齿轮齿条式汽车转向其器总成。 　　本标准不适用于动力转向器。

Automobile steering gear assembly bench test method

QC/T 29097-1992 汽车转向器总成技术条件

本标准规定了汽车转向器总成(不包括转向轴及转向管柱总成、转向轴万向节叉总成、横直拉杆总成)技术要求、检验规则、标志、包装、运输、贮存。 　　本标准适用于蜗杆滚轮式、循环球式、蜗杆指销式、齿轮齿条式汽车转向器总成。 　　本标准不适用于动力转向器。

Automobile steering gear assembly technical conditions

BS AU 244:1992 车辆动力学和道路定位能力的术语词汇

Defines the principal terms of vehicle dynamics applying to road vehicles such as passenger cars and commercial vehicles. Terms relating to the possibility of steering more than one axle are not included.

Glossary of terms for road vehicle dynamics and road holding ability

NF R15-506:1991 带传动.汽车工业用带轮和V形带.尺寸.

Belt drives. Pulleys and V-ribbed belts for the automotive industry. Dimensions.

ISO/TR 9511:1991 道路车辆 驾驶员手控范围 车内检验规程

Defines a method for determination of the position of driver hand-controls in vehicles and for verification that the controls lie within the hand-reach envelopes. Applies for checking purposes in road vehicles using the actual dimensions of the vehicle. It refers directly to left-hand drive motor vehicles. Application to right-hand drive vehicles is assumed to be symmetrically opposite. The hand-reach envelopes are described in ISO 3958.

Road vehicles; driver hand-control reach; in-vehicle checking procedure

BS AU 217-2:1989 机动车辆用最大公路行驶限速器.第2部分:系统和部件要求规范

Performance requirements.

Maximum road speed limiters for motor vehicles - Specification for system and component requirements

ISO/TR 8726:1988 道路车辆 使用伪随机转向输入的瞬态开环响应的试验方法

This Technical Report specifies a method for determining transient response behaviour at approximately constant speed. The quasi-open-loop manoeuvre used in this method is not representative of real driving conditions but is useful in obtaining measures of vehicle transient behaviour in terms that will be enable the response to any deterministic input to be calculated. Applies to passenger cars as defined in ISO 3833. In a simplified form this test method is also specified in ISO 7401 together with alternative and complementary procedures.

Road vehicles; transient open-loop response test method with pseudo-random steering input

HBm 65.7-1988 微型汽车 机械式变速器台架试验方法

本标准规定了微型汽车用具有同步器的机械式变速器的试验项目和试验方法。 　　本标准适用于微型汽车用具有同步器的机械式变速器（以下简称变速器）的试验。

Bench test method for mechanical transmission of miniature automobile

BS AU 225:1988 商用道路车辆转向球头尺寸规范

This International Standard specifies the main dimensions of steering ball joints for commercial vehicles. The ball joint is considered as being a single piece with its socket. Thus this International Standard covers the ball-socket assembly.

Specification for dimensions of steering ball joints for commercial road vehicles

HBm 65.5-1987 微型货车 离合器装配技术条件

本标准适用于微型货车离合器的装配。

Assembly technical conditions for clutches of miniature trucks

HBm 65.6-1987 微型货车 离合器台架试验方法

本标准适用于微型货车离合器（简称离合器）的台架试验。

Bench test method for clutches of miniature trucks

HBm 65.4-1987 微型货车 离合器技术条件

本标准适用于微型货车离合器（简称离合器）的制造和检验。

Specifications for Minivan Clutch

SANS 1440:1987 机动车的安全性．机动车辆（M1类）的转向机构．撞击后的行为

Covers the behaviour of the steering mechanism of Category M1 motor vehicles in a head-on collision. Requirements for design, rearward movement and the force exerted on the driver are specified and method of test include a collision test of a vehicle and

Motor vehicle safety: The steering mechanism of motor vehicles (Category M1 only): Behaviour on impact

JIS D 0012:1987 轿车变速器换挡位置图

Transmission shift positions for passenger cars

ISO 7803:1987 商用道路车辆 转向球接头

Specifies the main dimensions of steering ball joints. The ball joint is considered as being a single piece with its socket, so the ball-socket assembly is specified. A figure illustrates shapes and reference quantities of concern. Tabulates parameters for nominal diameters from 27 up to 50 mm.

Commercial road vehicles; Steering ball joints

BS AU 217-1a:1987 机动车辆用最大道路行驶速度限制器.安装要求规范

Performance and installation of devices designed to limit the maximum road speed by the control of engine power.

Maximum road speed limiters for motor vehicles - Specification for installed requirements

SAE J1117-1986 液压流体动力阀压差流动特性的测量办法和报告

To provide a uniform procedure for measuring and reporting the pressure losses associated with the significant flow paths in a hydraulic fluid power valve. This procedure applies to hydraulic fluid power valves as applied to self-propelled work machines as referenced in SAE J1116.

Method of Measuring and Reporting the Pressure differential-Flow characteristics of a Hydraulic Fluid Power Valve