共找到 63 条与 其他 相关的标准,共 5 页
Test method for electric heating performance of motor vehicle glass
本文件规定了轻型汽车多工况行驶车外噪声测量方法的测量仪器、测量条件、试验要求。 本文件适用于M1 类、最大设计总质量不超过3500kg 的M2 类和N1 类汽车的多工况行驶车外噪声测量。
Measurement methods for noise emitted by light-duty vehicles in multiple driving mode conditions
本标准规定了汽车爆胎应急安全装置的术语和定义.技术要求,试验方法及同一型式判定。本标准适用于汽车爆胎应急安全装置以及安装有汽车爆胎应急安全装置的M、Ms 、N*、Ns 类车辆,其他类型车辆可参照执行。
Performance requirements and test methods of automobile blow-out emergency safety device
GB/T5137 的本部分规定了汽车安全玻璃的耐化学侵蚀性和耐温度变化性试验的方法。本部分适用于汽车用塑玻复合材料、刚性塑料和柔性塑料的试验,其中耐化学侵蚀性的负重法仅适用于刚性塑料。
Test methods of safety glazing materials used on road vehicles—Part 5: Resistant-to-chemical and resistant-to-temperature changes test
GB/T5137 的本部分规定了汽车安全玻璃太阳光紫外线透射比、太阳光直接透射比、太阳光直接反射比、太阳光直接吸收比、太阳光红外直接透射比、太阳光红外直接反射比、太阳光红外直接吸收比、太阳能总透射比、太阳红外热能总透射比的太阳能特性试验的方法。本部分适用于汽车安全玻璃太阳能特性的试验。
Test methods of safety glazing materials used on road vehicles—Part 4:Determination of solar characteristic
GB/T5137 的本部分规定了汽车安全玻璃的耐辐照试验、耐热试验、耐湿试验、耐燃烧试验和耐模拟气候试验的方法。本部分适用于汽车安全玻璃的试验。
Test methods of safety glazing materials used on road vehicles—Part 3:Radiation,high temperature,humidity,fire and simulated weathering resistance tests
GB/T5137 的本部分规定了汽车安全玻璃的抗冲击性试验、抗穿透性试验、抗磨性试验、碎片状态试验、人头模型冲击试验、划格试验以及柔性和折叠试验的试验方法。本部分适用于汽车安全玻璃的试验。
Test methods of safety glazing materials used on road vehicles—Part 1: Mechanical properties tests
GB/T5137 的本部分规定了汽车用安全玻璃的可见光透射比试验、副像偏离试验、光畸变试验和可见光反射比试验的方法。本部分适用于汽车安全玻璃的试验。
Test methods of safety glazing materials used on road vehicles—Part 2:Optical properties tests
本标准规定了汽车贴膜玻璃的术语和定义、分类、要求、试验方法、检验规则和标志。 本标准适用于在既有汽车的玻璃上贴膜形成的贴膜玻璃。 本标准不适用于防护外力破坏型的贴膜玻璃。
Film mounted motor vehicle glass
本标准规定了汽车玻璃的贴膜要求y包括施工准备和要求、贴膜步骤和要求、验收要求、交付使用要求。 本标准适用于既有汽车玻璃贴膜施工过程。
Film mounted motor vehicle glass.Requirements for mounting
Automotive sliding window glass components
Guidelines for the implementation of safety production risk classification management and control system for automobile aluminum alloy wheel manufacturing enterprises
Implementation guidelines for the investigation and management of hidden dangers of production safety accidents in automobile aluminum alloy wheel manufacturing enterprises
本标准规定了汽车贴膜玻璃的术语和定义、分类、施工、要求、试验方法、检验规则和标志。 本标准适用于在既有汽车的玻璃上贴膜形成的贴膜玻璃及其施工过程。本标准不适用于防护外力破坏型的贴膜玻璃。
Technical requirements for film mounted motor vehicle glass
This SAE Recommended Practice establishes uniform Test Procedures for desiccant Air Dryers used in vehicles with compressed air systems per SAE J2383. Continuous flow desiccant Air Dryers are excluded from the scope of this document.
Air Dryer Test Procedure
本标准适用于乘用车铝合金控制臂总成。
Technical Requirements and Test Methods for Aluminum Alloy Control Arm Assembly Used in Passenger Car
Shandong province chemical plant safety commissioning work specification
General Parts for Diesel Engines for Armored Vehicles Part 47: Starting Valves
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号