T36 电子、电气设备 标准查询与下载
共找到 1044 条与 电子、电气设备 相关的标准，共 70 页
本标准适用于交流标称电压最大值为660V，支流标称电压最大值为1000V（根据GB 156-1993）的电动车辆充电设备。 本标准适用于电动道路车辆充电的设备。 本标准不适用于发动机启动、照明和点火装置或类似用途的，家用或其他类似的蓄电池充电系统的充电设备。本标准也不适用轮椅、室内电动汽车、有轨电车、无轨电车、铁路交通工具以及工业用载重车（如叉式起重机）等非道路用蓄电池充电系统的充电设备。本标准不涉及II类车辆。 本标准规定了对充电设备的基本结构要求，即对供电装置和车辆连接的特性及操作环境的要求；对充电设备的技术要求及针对此要求电动车应有的特性；对供电电压和电流的要求。对充电模式功能的要求；电动车辆连接及其接口的要求；对专用的插孔、连接器、插头、插座和充电电缆等的要求。本标准还规定了防电击保护等安全要求，但不包括与维护有关的其他安全要求。
Electric vehicle conductive charging system--Part 1: General requirements
- ICS
- 29.060.10
- CCS
- T36
- 发布
- 2001-11-12
- 实施
- 2002-05-01
本标准与GB/T 18487.1结合，给出传导连接到电动车辆的交流/直流充电机（站）（按GB 156-1993，交流电压最大值为660V，直流电压最大值为1000V）的具体要求。 对于交流充电站，本标准不包括不具有充电控制功能的盒式装置，它配有给电动车辆提供能源的插座。 根据GB/T 18487.1规定，电动车辆直流充电机（站）充电模式为模式4。 本标准不包括与维护有关的其它安全要求。
Electric vehicle conductive charging system A.C./D.Electric vehicle charging station
- ICS
- 29.060.10
- CCS
- T36
- 发布
- 2001-11-12
- 实施
- 2002-05-01
本标准规定了以直流和压缩空气驱动的机动车用喇叭的性能要求、试验方法及装于机动车辆上的喇叭的性能要求、试验方法。 本标准适用于M、N、L3、L4、L5类机动车。
Performance requirements and test methods of horn for motor vehicles
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2001-01-10
- 实施
- 2001-10-01
本标准规定汽车与挂车之间电连接器用的七芯电缆线的规格。 本标准适用于12N型、24N型、12S型、24S型电连接器。 本标准等同采用国际标准ISO 4141-1978《道路车辆--七芯电缆线》。
Seven-core connecting cable of motor vehicles and towed vehicles
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 1985-03-09
- 实施
- 1986-02-01
本标准规定汽车与挂车之间电连接器的试验方法与要求。 本标准适用于额定电压为6V、12V、24V车辆上装用的12N型、12S型、24N型、24S型电连接器。
Test methods for requirements of electrical connections between motor vehicles and towed vehicles
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 1985-03-09
- 实施
- 1986-02-01
本标准规定汽车与挂车之间12N型电连接器的插座与插头的规格、型式。使电连接器具有互换性。 本标准适用于电气系统的额定电压为6V或12V的公路及城市道路车辆。
Electrical connections between motor vehicles and towed vehicles--Type 12N
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 1985-03-09
- 实施
- 1986-02-01
本标准规定汽车与挂车之间24N型电连接器的插座与插头的规格、型式。使电连接器具有互换性。 本标准适用于电气系统的额定电压为24V的公路及城市道路车辆。
Electrical connections between motor vehicles and towed vehicles--Type 24N
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 1985-03-09
- 实施
- 1986-02-01
Streaming media rearview mirror for cars
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2022-04-24
- 实施
- 2022-10-01
Vehicle-mounted millimeter-wave radar detection performance test method
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2021-09-14
- 实施
- 2021-12-01
USB power adapter for cars
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2021-08-21
- 实施
- 2022-02-01
Commutator for automotive micromotors
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2021-08-21
- 实施
- 2022-02-01
Oxygen sensors for motorcycles and mopeds
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2021-03-05
- 实施
- 2021-07-01
This document defines terms and specifies test methods and general performance requirements for single-pole and multi-pole connections used with on-board electrical wiring harnesses of road vehicles. This document is applicable to connectors designed to be disconnected after mounting in the vehicle for repair and maintenance only. It does not cover one-part connections, i.e. where one part of the connection has direct contact to the pattern of the printed circuit board. This document is not applicable to internal connections of electronic devices.
Road vehicles - Connections for on-board electrical wiring harnesses - Part 5: Test methods and general performance requirements for wiring harness connector operation
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2021-01-00
- 实施
This Standard specifies harness excitation test methods and procedures for determining the immunity of electronic components of passenger cars and commercial vehicles regardless of the propulsion system (e.g. spark-ignition engine, diesel engine, electric motor).
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy - Part 4: Harness excitation methods
- ICS
- 33.100.20
- CCS
- T36
- 发布
- 2021
- 实施
Technical conditions of passenger car air conditioning system
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2020-12-30
- 实施
- 2021-04-01
Road vehicles. Fuse-links. Fuse-links with tabs Type L (high current miniature)
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2020-12-16
- 实施
- 2020-12-16
This document specifies fuse-links with tabs (blade-type) Type L (high current miniature) for use in road vehicles. It establishes, for this fuse-link type, the rated current, test procedures, performance requirements and dimensions. This document is applicable for fuse-links with a rated voltage of 32 V, a current rating of ≤60 A and a breaking capacity of 1000 A intended for use in road vehicles. This document is intended to be used in conjunction with ISO 8820-1 and ISO 8820-2. The numbering of its clauses corresponds to that of ISO 8820-1 whose requirements are applicable, except where modified by requirements particular to this document.
Road vehicles - Fuse-links - Part 10: Fuse-links with tabs Type L (high current miniature)
- ICS
- 43.040.10
- CCS
- T36
- 发布
- 2020-12-00
- 实施
