T58 油罐汽车 标准查询与下载
共找到 123 条与 油罐汽车 相关的标准，共 9 页
LPG equipment and accessories. Filling and discharge procedures for LPG road tankers
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2013-06-30
- 实施
- 2013-06-30
Tanks for transport of dangerous goods - Terminology; German version EN 14564:2013
- ICS
- 01.040.13;01.040.23;13.300;23.020.20
- CCS
- T58
- 发布
- 2013-04
- 实施
Tanks for transport of dangerous goods - Terminology
- ICS
- 01.040.13;01.040.23;13.300;23.020.20
- CCS
- T58
- 发布
- 2013-03-20
- 实施
- 2013-03-20
This European Standard covers the digital interface at the product loading and/or discharge coupling which is used for the transfer of product related information and specifies the performance requirements,critical safety aspects and tests to provide compatibility of devices.
Tanks for transport of dangerous goods.Digital interface for product recognition devices for liquid fuels; German version EN 14116:2012
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2013-01
- 实施
Tanks for transport of dangerous goods -Digital interface for product recognition devices for liquid fuels
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2012-12-01
- 实施
- 2012-12-21
This European Standard is applicable to non-pressure balanced and pressure balanced footvalves intended for loading and unloading and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this standard. Footvalves covered by this European standard are unsuitable for use in applications where the product velocity exceeds 5m/sec The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50℃ and petrol, and which have no sub-classification as toxic or corrosive.
Tanks for the transport of dangerous goods - Service equipment - Footvalve sizes other than 100 mm dia (nom); German version EN 16257:2012
- ICS
- 23.020.20
- CCS
- T58
- 发布
- 2012-12
- 实施
Tanks for transport of dangerous goods. Digital interface for product recognition devices for liquid fuels
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2012-10-31
- 实施
- 2012-10-31
LPG equipment and accessories. Equipping of LPG road tankers
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2012-09-30
- 实施
- 2012-09-30
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels.
- ICS
- 13.300;23.020.20
- CCS
- T58
- 发布
- 2011-12-01
- 实施
- 2011-12-16
Road tankers with volume scale level gauging
- ICS
- 17.060;43.080.10
- CCS
- T58
- 发布
- 2011-11-21
- 实施
This European Standard specifies the following points regarding the minimum requirements for an overfill prevention system.
Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels; German version EN 13922:2011
- ICS
- 13.300;23.020.20
- CCS
- T58
- 发布
- 2011-11
- 实施
Tanks for transport of dangerous goods - Digital interface for the product recognition device; German version EN 14116:2007+A2:2010
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2011-02
- 实施
1.1 Scope. 1.1.1* This standard shall apply to tank vehicles used for the transportation of asphalt or normally stable flammable and combustible liquids with flash points below 200°F (93°C). 1.1.2 This standard shall also provide minimum requirements for the design and construction of cargo tanks and their appurtenances and shall set forth certain matters pertaining to tank vehicles. 1.1.3 The provisions of this standard shall not preclude the use of additional safeguards for tank vehicles used for the transportation of flammable and combustible liquids having characteristics that introduce additional factors such as high rates of expansion, instability, corrosiveness, and toxicity. 1.1.4 The provisions of this standard shall also apply to cutback asphalts that have flash points below 100°F (37.8°C) and to liquids transported at temperatures elevated above their flash points. 1.1.5 The requirements for aircraft fuel servicing tank vehicles shall be in accordance with NFPA 407, Standard for Aircraft Fuel Servicing. 1.1.6 A tank vehicle transporting a flammable or combustible liquid in interstate service shall be considered to be in compliance with this standard while it is in interstate service if it meets the requirements of the U.S. Department of Transportation 49 CFR 171û179, ôHazardous Materials Regulations.ö
Standard for Tank Vehicles for Flammable and Combustible Liquids
- ICS
- 13.220.20;23.020.20
- CCS
- T58
- 发布
- 2011-01-01
- 实施
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour collection adaptor and coupler.
- ICS
- 13.300;23.020.20;23.040.60
- CCS
- T58
- 发布
- 2009-03-01
- 实施
- 2009-03-18
This European Standard covers the digital interface at the product loading and/or discharge coupling which is used for the transfer of product related information and specifies the performance requirements, critical safety aspects and tests to provide compatibility of devices. This European Standard specifies a digital interface which is suitable for use with liquid fuels.
Tanks for transport of dangerous goods - Digital interface for the product recognition device (includes Amendment A1:2008); English version of DIN EN 14116:2009-02
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2009-02
- 实施
Tanks for transport of dangerous goods - Digital interface for the product recognition device.
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2009-01-01
- 实施
Tanks for transport of dangerous goods - Digital interface for the product recognition device.
- ICS
- 13.300;23.020.20;35.240.60
- CCS
- T58
- 发布
- 2009-01-01
- 实施
- 2009-01-17
This document summarizes the results of a full scale tank buckling test. The results were used to develop recommended design rules specific to the design of cylindrical, thin wall, trailer truck tanks. The testing and analyses summarized in this report were performed to support the development of buckling design criteria and shell stiffening details for both hazmat and non-hazmat transport tanks
BUCKLING OF CYLINDRICAL, THIN WALL,TRAILER TRUCK TANKS AND ASME SECTION XII
- ICS
- CCS
- T58
- 发布
- 2009
- 实施
This European Standard specifies equipment and accessories for road tankers used for the transport of Liquefied Petroleum Gas (LPG) and identifies the equipment that is considered necessary to ensure that filling, transportation and discharge operations can be carried out safely. It also specifies the requirements for the assembly of the accessories and the vehicle LPG equipment to the road tanker. This European Standard also identifies additional equipment and accessories that may be used on road tankers carrying LPG. NOTE This European Standard does not preclude the use of alternative designs, materials and equipment testing which provide a similar level of safety. This European Standard does not apply to "tank-containers" and "battery-vehicles" used for the transportation of LPG.
LPG equipment and accessories - Equipping of LPG road tankers(includes Amendment A1:2008); English version of DIN EN 12252:2008-06
- ICS
- 43.080.10
- CCS
- T58
- 发布
- 2008-06
- 实施
- 2008-06-01
