T58 油罐汽车 标准查询与下载

BS EN 14334:2005 LPG槽罐车的检验和试验

This document specifies minimum requirements for the inspection and testing of the LPG road tanker, which includes its tank, tank accessories and vehicle LPG equipment. This document does not specify requirements for the initial inspection (after manufacture) of a tank, see EN 12493 or the road tanker, see EN 12252. NOTE There is no upper size limit for the tank as this will be determined by the gross vehicle weight limitation. For inspection and testing requirements of equipment other than the tank, tank accessories and vehicle LPG equipment, see applicable international/national regulations.

Inspection and testing of LPG road tankers

SANS 20111:2004 N 和O类罐车转动稳定性认证的统一规定

Applies to the rollover stability of tank vehicles of category N2, N3, O3 and O4 intended for the carriage of dangerous goods as defined in the ADR agreements.

Uniform provisions concerning the approval of tank vehicles of categories N and O with regard to rollover stability

BS EN 13094:2004 危险物品运输用槽罐.工作压力不超过0.5bar的金属槽罐.设计和建造

This European Standard specifies minimum requirements for the design and construction of metallic tanks with a maximum working pressure not exceeding 50 kPa gauge used for the transport of dangerous goods by road and rail for which Tank Code with letter "G" is given in chapter 3.2 of ADR [2]. It also includes requirements for a system of identification of materials used in the construction of these tanks. This European Standard specifies requirements for openings, closures and structural equipment; it does not specify requirements for service equipment. This European Standard is not applicable to aircraft refuellers, except where they are used on public roads, or to fixed rail tank wagons. It is applicable to inter-modal tanks (e.g. tank containers and tank swap bodies) for the transport of dangerous goods by road and rail, for which additional dynamic loads are specified by the railway Competent Authority.

Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction

DIN EN 13760:2003 轻型和重型车辆用汽车液化石油气灌充设备.喷嘴的试验要求和尺寸

Automotive LPG filling system for light and heavy duty vehicles - Nozzle, test requirements and dimensions; German version EN 13760:2003

NF T81-107:2003 运输与装卸.道路罐车.操作者安全.通路和装卸安全措施

Transport and handling - Road tankers - Operators safety - Acces and handling securities.

BS EN 14116:2003 危险物品运输用槽罐车.产品识别装置用数字接口

This European Standard covers the digital interface at the product loading and/or discharge coupling which shall be used for the transfer of product related information and specifies the performance requirements, critical safety aspects and tests to provide compatibility of devices. This European Standard specifies a digital interface which is suitable for use with liquid fuels.

Tanks for transport of dangerous goods - Digital interface for the product recognition device

DIN EN 13308:2003 危险物品运输槽罐车.槽罐车辅助设备.无压平衡底阀

Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve; German version EN 13308:2002

DIN EN 13316:2003 危险物品运输槽罐车.槽罐车辅助设备.压力平衡底阀

The document covers the pressure balanced footvalve for bottom loading and unloading and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 ?and petrol, and which have no sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve; German version EN 13316:2002

DIN EN 13314:2003 危险品运输槽罐车.槽罐车辅助设备.装载孔封盖

This European standard covers the fill hole cover and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods By Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 ?and petrol, and which have no sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover; German version EN 13314:2002

BS EN 14338:2003 LPG槽罐车的检验和试验

This European Standard specifies a method to assess the transfer or migration of specific volatile and semivolatile substances from paper and board. This test method is developed for paper and board intended to come in contact with dry, non fatty foodstuffs and paper and board for baking purposes. In the last case the modified polyphenylenoxide (MPPO) can be seen as a substitute simulant for fatty contact. NOTE MPPO can also be seen as a substitute simulant for olive oil.

Paper and board intended to come into contact with foodstuffs - Conditions for determination of migration from paper and board using modified polyphenylene oxide (MPPO) as a simulant

BS EN 13317:2002 危险物品运输用槽罐车.槽罐车用辅助设备.人孔盖组件

This European Standard covers the manhole cover assembly and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C including petrol, and which have no-sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for Tanks - Manhole cover assembly

BS EN 13314:2002 危险物品运输用槽罐车.槽罐车用辅助设备.装填孔盖

This European Standard covers the fill hole cover and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no-sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Fill hole cover

BS EN 13316:2002 危险物品运输用槽罐车.槽罐车用辅助设备.压力平衡底阀

This European Standard covers the pressure balanced footvalve for bottom loading and unloading and specifies the performance requirements, dimensions and tests necessary to verify the compliance of the equipment to this standard. The equipment specified by this standard is applicable to liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no-sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Pressure balanced footvalve

BS EN 13308:2002 危险物品运输用槽罐车.槽罐车用辅助设备.无压力平衡底阀

This European Standard is applicable to non pressure balanced footvalve and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road – (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no-sub-classification as toxic or corrosive .

Tanks for transport of dangerous goods - Service equipment for tanks - Non pressure balanced footvalve

DIN EN 13315:2002 危险物品运输用储罐.储罐的使用设备.重力式卸载耦合器; 德文版本 EN 13315:2002

This European Standard applies to gravity discharge coupler and specifies the performance requirements, critical dimensions and tests necessary to verify the compliance of the equipment with this standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of class 3 ADR - European Agreement concerning the International Carriage of Dangerous Goods by Road - (flammable liquids) which have a vapour pressure not exceeding 110 kPa at 50 ?and petrol, and which have no sub-classification as toxic or corrosive.

Tanks for transport of dangerous goods - Service equipment for tanks - Gravity discharge coupler; German version EN 13315:2002

BS EN 13776:2002 液化石油气道路运输罐装车的灌装和卸料程序

This European Standard specifies filling, discharge and emergency procedures for road tankers used for the transport of liquefied petroleum gas (LPG). This standard also covers routine maintenance procedures for LPG equipment of road tankers. This standard applies to road tankers equipped in accordance with EN 12252. This standard does not apply to “batteries of receptacles”.

Filling and discharge procedures for LPG road tankers

QC/T 653-2000 运油车、加油车技术条件

本标准规定了装运轻质燃油的运油车、加油车(含飞机加油车)的定义，分类及主要性能参数，要求，实验方法，检验规则，标志、使用说明书，随车文件、运输、贮存。 　　本标准适用于用定型汽车底盘改装的装运轻质燃油的运油车、加油车(含飞机加油车)。

Technical conditions for oil trucks and refueling trucks

QC/T 587-1999 罐式汽车产品质量检验评定方法

本标准规定了罐式汽车产品质量检验的抽样，检验项目、检验方法和评定方法及综合评定方法。 　　本标准适用于罐式汽车的产品质量监督检验。 　　罐式半挂车参照本标准执行。

Quality inspection and evaluation method of tank automobile products

ANSI/IAS NGV4.2-1999 天然气车辆和分装系统用软管

Applies to compressed natural gas hose assemblies that are used for NGV dispensing stations to connect the dispenser to the refueling nozzle, or used as part of a vehicle on-board fuel system and for gas lines which carry vented gas back to a safe location. Hose assemblies certified under this standard may be assembled at the point of manufacture of the bulk hose, or at hose assembly facilities authorized by the bulk hose manufacturer.

Hoses for Natural Gas Vehicles and Dispensing Systems

QC/T 257-1998 压缩天然气汽车定型试验规程

本标准规定了可燃用压缩天然气的汽车的定型试验实施条件、试验项目、程序及方法和试验报告的内容。 　　本标准适用于在已定型汽车产品上安装压缩天然气专用装置的压缩天然气单燃料、柴油-压缩天然气双燃料和汽油/压缩天然气两用燃料汽车中的M类和N类汽车。

Compressed Natural Gas Vehicle Type Test Regulations