共找到 336 条与 摩托车综合 相关的标准,共 23 页
本标准规定了摩托车和轻便摩托车转向轮限位装置和最大转向角的技术要求及测量条件、试验方法。 本标准适用于摩托车和轻便摩托车。
Motorcycles and mopeds.Limitative device to steering and maximum wheel steer angle.Requirements and measurement methods
本标准规定了摩托车燃油消耗量限值及测量方法。 本标准适用于摩托车(赛车和越野车除外)。
The limits and measurement methods of fuel consumption for motorcycles
本标准规定了摩托车和轻便摩托车操纵件、指示器及信号装置的图形符号以及光信号装置的颜色。 本标准适用于装在仪表上及靠近摩托车和轻便摩托车驾驶员的那些操纵件。但这些并不意味着必须使用本标准列出的每一个操纵件。 本标准适用于摩托车和轻便摩托车(以下简称摩托车)。
Symbols for controls,indicators and tell tales for motorcycles and mopeds
Moped fuel consumption limits and measurement methods
GB/T 5359的本部分规定了与摩托车和轻便摩托车性能有关的术语。 本部分适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“摩托车”)。
Term for motorcycles and mopeds.Part 2:Performance of vehicles
GB/T 5359的本部分规定了与摩托车和轻便摩托车尺寸有关的一般原则和术语。 本部分准适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“车辆”)。
Term for motorcycles and mopeds.Part 3:Dimensions of vehicle with two and three wheels
GB/T 5359的本部分规定了摩托车和轻便摩托车质量术语的一般原则及术语和定义。 本部分适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“摩托车”)。
Term for motorcycles and mopeds.Part 4:Mass of vehicle with two and three wheels
本标准规定了与两轮摩托车、两轮轻便摩托车的坐标系和运动、车轮及轮胎、悬架系统、方向操纵系统、定向动力学、摩托车运动特性、摩托车一驾驶员系统的空气动力特性、驾驶姿势和行为、试验等有关的专用术语的定义。 本标准适用于两轮摩托车、两轮轻便摩托车(以下简称为摩托车),其他摩托车和轻便摩托车亦可参照使用。
Motorcycles and mopeds-Terminology of control lability and stability
本标准规定了摩托车和轻便摩托车操纵装置的型式、位置及基本要求。 本标准适用于摩托车和轻便摩托车(以下简称摩托车)的操纵装置。
Types,positions and performance requirements for controls of motorcycles and mopeds
本标准规定了GB/T 5359.1所定义的摩托车和轻便摩托车的零部件名称。 本部分适用于GB/T 5359.1所定义的摩托车和轻便摩托车。
Motorcycles and mopeds part and component.Designations for vehicle with two and three wheels
GB/T 5339的本部分规定了摩托车和轻便摩托车辆类型的术语。 本部分适用于公路、城市道路行驶与越野用摩托车和轻便摩托车。
Term for motorcycles and mopeds.Part 1:Types of vehicles
本标准规定了摩托车和轻便摩托车道路试验试验前的准备、试验条件、试验方法、取值规则和对试验记录的一般要求。 本标准适用于摩托车和轻便摩托车(赛车和电动摩托车除外)的道路试验。
Methods of road test for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车轻合金车轮的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于道路上行驶的摩托车和轻便摩托车用轻合金整体车轮和轻合金组合车轮。
Light-alloy wheels for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车鼓式制动的制动鼓尺寸系列、盘式制动的螺纹孔系列、轮毂轴承孔系列、花键传动的花键参数和轮毂的安装尺寸系列。 本标准适用于摩托车和轻便摩托车各类车轮(如轻合金车轮、辐条式车轮、辐板式车轮)用轮毂。
Series of mounting dimensions for wheel hub of motorcycles and mopeds
本标准规定了摩托车和轻便摩托车型号编制方法。 本标准适用于GB/T 5359.1中所规定的动力为一种热机的摩托车和轻便摩托车的型号编制。
Code of designation for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车的尺寸和质量参数的测量条件、测量方法和取值规则。 本标准适用于摩托车和轻便摩托车。
Measuring method of dimensions and masses parameter for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车的制动性能要求和试验方法。 本标准适用于摩托车和轻便摩托车。 本标准不适用于最高设计车速不超过25km/h 的轻便摩托车和残疾人用车。
Performance and measurement method for braking of motorcycles and mopeds
本标准规定了摩托车和轻便摩托车外部凸出物的有关定义、要求和试验方法等。 本标准适用于摩托车和轻便摩托车。
External projections from motorcycles and mopeds
本标准规定了了摩托车乘员扶手的要求。 本标准适用于两轮摩托车和边三轮摩托车的主车。
Passenger hand-holds on motorcycles
本标准规定了摩托车和轻便摩托车燃油箱的安全性能要求和试验方法。本标准适用于摩托车和轻便摩托车(以下简称摩托车)用金属燃油箱和非金属燃油箱。
Safety property requirements and test method for fuel tanks of motorcycles and mopeds
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号