共找到 612 条与 船舶用材料及其检验方法 相关的标准,共 41 页
This SAE Standard specifies requirements for two types, two classes and three styles of reinforced hose for conveying gasoline or diesel fuel aboard small craft including pleasure craft whose fuel systems are regulated under 33 CFR 183 Subpart J. Refer to SAE J 1942 Hose and Hose Assemblies for commercial marine nonmetallic flexible hose or hose assemblies used in systems on board commercial vessels inspected and certified by the U.S. Coast Guard.
Marine Fuel Hoses
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
THERMOCOUPLES AND RESISTANCE TEMPERATURE DETECTOR ASSEMBLIES, GENERAL SPECIFICATION FOR (NAVAL SHIPBOARD)
MIL-F-87090 (0S) 5 November 1981, is hereby reinstated and may be used for
FOAM, COMBUSTION RETARDANT, FOR CUSHIONING SUPPLY ITEMS ABOARD NAVY SHIPS
This specification covers the requirements for electrical power dead-front, deck-mounted, low voltage switchgear for Naval shipboard use.
SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD
This specification is approved for use by all Departments and Agencies of the Department of Defense.
FUEL, NAVAL DISTILLATE
本标准规定了船用钢焊接接头弯曲试验的式样、样坯截取及试样制备、试验步骤和试验结果的检查等。 本标准适用于船用钢焊接接头弯曲试验。
Methods of bend tests for shipbuilding welded joint
本规范规定了潜艇舱室用环氧聚酰胺隔声密封材料的要求、质量保证规定、交货准备及说明事项等。 本规范适用于潜艇舱室用环氧聚酰胺隔声密封材料。
Specification for sound insulation and sealant epoxy-polyamide material for submarine cabins
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
METER FREQUENCY, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SHIPBOARD USE)
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.
FANS, VANEAXIAL AND TUBEAXIAL, VENTILATION AND AIR CONDITIONING, NAVAL SHIPBOARD
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.
TRAPS, STEAM, INTERMITTENT DISCHARGE AND CONTINUOUS FLOW, NAVAL SHIPBOARD
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—原子吸收光谱法测定铅量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铅量的测定。测定范围:0.020%~0.300%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 10: Atomic absorption spectrographic method for the determination of plumbum content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—原子吸收光谱法测定镉量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中镉量的测定。测定范围:0.50%~1.30%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 9: Atomic absorption spectrographic method for the determination of cadmium content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—原子吸收光谱法测定镍量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中镍量的测定。测定范围:0.10%~0.40%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 8: Atomic absorption spectrographic method for the determination of nickel content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—丁二酮肟光度法测定镍量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中镍量的测定。测定范围:0.10%~0.40%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 7: Dimethylglyoxime photometric method for the determination of nickel content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—原子吸收光谱法测定铜量的原理、试剂、仪器、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铜量的测定。测定范围:0.050%~0.500%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 6: Atomic absorption spectrographic method for the determination of copper content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—二乙基二硫代氨基甲酸钠光度法测定铜量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铜量的测定。测定范围:0.50%~7.00%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 5: Sodium diethyldithiocarbamate photometric method for the determination of copper content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—蒸馏分离—砷钼蓝光度法测定砷量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中砷量的测定。测定范围:0.0050%~0.0500%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 16: Distillation-arsenic-molybdenum blue photometric method for the determination of arsenic content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—硫脲光度法测定铋量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铋量的测定。测定范围:0.010%~0.050%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 15: Thiourea photometric method for the determination of bismuth content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—铬天菁S光度法测定铝量的原理、试剂、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铝量的测定。测定范围:0.0040%~0.0500%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 14: Chromazurol S photometric method for the determination of aluminium content
CB/T 3905的本部分规定了锡基轴承合金化学分析方法—电解法测定铜量的原理、试剂、仪器、分析步骤、结果计算等。 本部分适用于锡基轴承合金中铜量的测定。测定范围:1.00%~9.00%。 本部分应与CB/T 3905.1-2005一起使用。
Method for chemical analysis of tin-base bearing alloy - Part 4: Electrolytic process for the determination of copper content
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号