U05 船舶用材料及其检验方法 标准查询与下载

CB 1124-2008 舰船用高强度船体结构钢焊接材料的鉴定、出厂和进货检验规则

本标准规定了船舶用屈服强度下小于355MPa的高强度船体结构钢焊接材料（以下简称焊接材料）的鉴定、出厂检验和进货检验的一般要求。 本标准适用于手工电弧焊焊条、埋弧焊焊条和焊剂、气体保护焊焊丝（含药芯焊丝）等焊接材料的鉴定检验、出厂检验和进货检验。

Inspection regulation of identification,manufacture and stock on welding consumables for high strength hull structural steel of ship

CB 1140-2008 潜望镜镜管毛坯规范

本规范规定了潜艇潜望镜镜管毛坯（以下简称毛坯）的要求、质量保证规定和交货准备等。 本规范适用于各型潜艇潜望镜镜管毛坯的设计、生产和验收。

Specification for rough of submarine periscope tube

CB 1416-2008 舰船用铜合金锻件超声波检测

本标准规定了铜合金锻件超声波检测的一般要求、试块、检测条件和灵敏度调整、缺陷的评定、质量等级及检测报告等。 本标准适用于A型脉冲反射式超声波检测方法对厚度大于等于12mm的铜合金锻件超声波检测。

Ultrasonic inspection for copper alloy forgings of ship

UL MARINE PRODUCTS-2008 船用产品目录 2008

MARINE PRODUCTS DIRECTORY 2008

MARINE PRODUCTS DIRECTORY 2008

ASTM A131/A131M-08 船用结构钢的标准规范

1.1 This specification covers structural steel plates, shapes, bars, and rivets intended primarily for use in ship construction. 1.2 Material under this specification is available in the following categories: 1.2.1 Ordinary Strength8212;Grades A, B, D, and E with a specified minimum yield point of 34 ksi [235 MPa], and 1.2.2 Higher Strength8212;Grades AH, DH, EH, and FH with a specified minimum yield point of 46 ksi [315 MPa], 51 ksi [350 MPa], or 57 ksi [390 MPa]. 1.3 Shapes and bars are normally available as Grades A, AH32, and AH36. Other grades may be furnished by agreement between the purchaser and the manufacturer. 1.4 The maximum thickness of products furnished under this specification is 4 in. [100 mm] for plates and 2 in. [50 mm] for shapes and bars. 1.5 When the steel is to be welded, it is presupposed that a welding procedure suitable for the grade of steel and intended use or service will be utilized. See Appendix X3 of Specification A 6/A 6M for information on weldability. 1.6 The values stated in either inch-pound units or SI units are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification.

Standard Specification for Structural Steel for Ships

DIN 80200:2007 造船用钢制部件.表面预处理、预涂底漆和底漆涂层用符号

Steel components for shipbuilding - Symbols used for surface preparations, shop primers and priming coats

GJB 6055-2007 舰艇用907A型钢规范

本规范规定了舰艇用 907A 型钢的技术要求、质量保证规定和交货准备等。 本规范适用于舰艇结构用型号为 5～18 号模铸 907A 球扁钢和边厚度不大于 14mn 的 907A 角钢。

Specification for 907A prefiled military ship

GJB 731A-2007 声纳导流罩防污漆规范

本规范规定了舰船声呐导流罩防污漆（以下简称防污漆）的要求、质量保证规定和交货准备等。 本规范适用于防污漆的研制、生产和验收。

Specification for antifouling paint on sonar dome

CB 261-2007 水面舰艇圆形钢支柱选用要求

本标准规定了水面舰艇用圆形钢支柱（简称“支柱”）的分类、材料、基本尺寸、强度、稳定性和端部结构等选用要求。 本标准适用于甲板板架的加强结构设计，但不适用于油舱内的加强结构设计。

Requirement for selecting of tubular steel pillar of surface ship

ASTM F718-07(2011)e1 造船及船用油漆和涂料产品/过程数据表的标准规范

1.1 The Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet provides on one sheet needed information concerning the characteristics of a specific paint or coating to include generic description, physical properties, surface preparation requirements, application requirements, and safety. The front side of the sheet contains four major, numbered paragraphs and a highlighted section for Special Safety Precautions. These paragraphs are as follows:I. Generic Type and DescriptionII. Manufacturers DataIII. Properties IV. Surface Preparation Minimum RequirementsThe back side of the page contains the following paragraphs:V. Mixing ProcedureVI. Application1.2 The completed data sheets can be used by technical personnel to help evaluate the technical acceptability of a proposed material, by production personnel to evaluate production compatibility of proposed materials and to provide application instructions for selected paints and coatings materials, and by quality control personnel to verify attributes of materials.

Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

ANSI/NAAMM FP1001-2007 金属标杆的设计指导规范

Standard provides a method to determine size of flagpole based on wind load on both pole and flag. Calculation procedure utilizes charts and tables based on variables including wind speed, height of pole, pole material, and flag size.

Guide Specifications for Design of Metal Flagpoles

GJB/Z 226-2006 潜艇非耐压船体结构设计计算方法

本指导性技术文件规定了潜艇内部液舱、内部平台、舷间非耐压液舱、艏端、艉端及稳定翼、上层建筑、指挥室围壳等的计算方法。 本指导性技术文件适用于常规潜艇和核潜艇的非耐压船体结构设计。

Methods for design and calculation for submarine non-pressure hull structure

GJB 5908-2006 舰船用白铜管材规范

本规范规定了舰船用白铜拉制管材的要求、质量保证规定、交货准备等。 本规范适用于舰船海水管路用白铜拉制管材。

Specification for Cu-Ni alloy pipe for ship

GJB 5911-2006 舰艇用15CrNi3MoV钢锻钢规范

本规范规定了舰艇用5CrNi3MoV（代号925A）钢锻钢的要求、质量保证规定及交货准备等。 本规范适用于舰艇耐压壳体用厚度不大于120mm的锻件及直径或边长为100mm～500mm的钢坯。也适用于其它结构用同种钢锻件或钢坯。

Specification for 15CrNi3MoV steel forged steel for military ship

SAE J1781-2006 船舶系统和液压系统的设备材料

The purpose of this Recommended Practice is to define materials for use in fluid systems of marine vehicles, including submersibles and advanced surface craft. This report is more particularly directed to the designer of fluid power and piping systems on board marine vehicles. The scope of this Recommended Practice is to delineate groups of materials for which there is considerable fabrication and operating experience in the sea water environment. In addition, some of the more promising materials for possible future applications are covered.

Ship Systems and Equipment - Materials for Fluid Systems

SAE J1778-2006 舰船系统和液压液选用设备的推荐规程

This SAE Recommended Practice identifies general requirements for hydraulic fluids to be used for ship systems and equipment with respect to power transmission, lubrication, and passive applications. It also indicates the environmental limits with respect to power transmission, lubrication, and passive applications. It also indicates the environmental limits within which the fluids shall perform their intended purpose satisfactorily and reliably. Characteristics of particular importance to ship systems and equipment are discussed.

Ship Systems and Equipment Recommended Practice for Hydraulic Fluid Selection

NAVY DOD-E-24607 A INT AMD 1-2006 [代替: 海军 国防部-E-24607 A 航空情报 AMD 1,海军 国防部-E-24607 A,海军 国防部-E-24607 (3),海军 国防部-E-24607 (2),海军国防部-E-24607 (1),海军国防部-E-24607]半光泽氯化树脂醇酸树脂干性防燃内部珐琅(公制)

This specification covers enamel, interior, nonflaming (dry), chlorinated alkyd resin, semigloss formulated to a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L) (2.83 pounds per gallon).

ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (METRIC) [Superseded: NAVY DOD-E-24607 A INT AMD 1, NAVY DOD-E-24607 A, NAVY DOD-E-24607 (3), NAVY DOD-E-24607 (2), NAVY DOD-E-24607 (1), NAVY DOD-E-24607]

NAVY QPL-23151-24-2006 扩展比例交换机类电压表(海军军舰上用途)

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

VOLTMETER, EXPANDED SCALE SWITCHBOARD TYPE (NAVAL SHIPBOARD USE)

NAVY MIL-E-24763 A (1)-2006 海军军舰上用乳状液类瓷釉

The allowable levels of lead and lead compounds (total) shall be maintained at this level or lower. 3/ See 3.5.

ENAMEL, EMULSION TYPE, FOR SHIPBOARD USE

UL MARINE PRODUCTS-2006 船用产品目录

MARINE PRODUCTS DIRECTORY

MARINE PRODUCTS DIRECTORY