U05 船舶用材料及其检验方法 标准查询与下载

BS ISO 614:2012 船舶和海洋技术. 舷窗和矩形窗用钢化安全玻璃板. 非破坏性强度试验中的冲压法

Ships and marine technology. Toughened safety glass panes for rectangular windows and side scuttles. Punch method of non-destructive strength testing

KS V ISO 614:2012 造船和海上建筑物.矩形窗和侧舷窗用钢化安全玻璃板.强度无损检验的冲压方法

이 표준은 선박용 각창과 현창의 강화 안전 유리판에 대한 비파괴 강도시험의 펀치방법에 대해

Shipbuilding and marine structures-Toughened safety glass panes for rectangular windows and side scuttles-Punch method of non-destructive strength testing

KS V 7468-2012 海水压载舱与船载货物船的双重船侧空间涂装与检验标准

이 표준은 2008년 7월 1일 이후 신조 건조 계약을 체결한 총 톤 수 500톤 이상의

Coatings and inspection standard for sea water ballast tanks and double-side skin spaces of bulk carriers

KS V 7467-2012 船载货物船与油轮的无人区域涂装与检验标准

이 표준은 계약일 기준 2007년 10월 5일 이후 신조 건조 계약을 체결하면서 선주와 보

Guidelines on coatings and inspection for void spaces on bulk carriers and oil tankers

KS V 7469-2012 原油运输船的石油灌涂料和检验标准

이 표준은 2013년 1월 1일 이후 신조 건조 계약을 체결한 재화 중량 5 000톤 이상

Coatings and inspection standard for cargo oil tanks of crude oil tankers

ISO 16145-1:2012 船舶和海洋技术.防护涂层和检验方法.第1部分:专用海水压载水舱

This part of ISO 16145 specifies a method of protective coatings and its inspection for dedicated seawater ballast tanks. It is applicable to all types of ships of not less than 500 gross tonnage and double-side skin spaces of bulk carriers of 150 m in length and upwards, which are contracted for new building on or after 1 July 2008; or in the absence of a building contract, the keels of which are laid or which are at a similar stage of construction on or after 1 January 2009; or the delivery of which is on or after 1 July 2012. This part of ISO 16145 also is applicable to the dedicated seawater ballast tanks of oil tankers of double hull construction of 150 m in length and upwards and double-side skin spaces of bulk carriers of 90 m in length and upwards, which are contracted for new building on or after 8 December 2006. NOTE Double-side skin space is a configuration where each ship side is constructed by the side shell with a longitudinal bulkhead connecting to the double bottom and the deck. Hopper side tanks and top-side tanks may, where fitted, be integral parts of the double-side skin configuration. Therefore, the void spaces or other designated tanks arranged as a part of top-side tank, when provided in the bulk carriers of single-side skin construction, need not be considered as a double-side skin space (see Figures 1 and 2 for details). Key 1 top-side tank 2 hopper side tank 3 void space or other designated tank (not to be considered as a double-side skin space) Figure 1 — Midship section of bulk carriers with single-side skin construction 1 Licensee=University of Alberta/5966844001, User=sharabiani, shahramfs Key 1 top-side tank 2 hopper side tank 3 void space or other designated tank (to be considered as a double-side skin space) 4 double-side skin space Figure 2 — Midship section of bulk carriers with double-side skin construction

Ships and marine technology - Protective coatings and inspection method - Part 1: Dedicated sea water ballast tanks

ISO 16145-3:2012 船舶和海洋技术.防护涂层和检验方法.第3部分:原油油船的货油舱

This part of ISO 16145 specifies a method of protective coatings and its inspection of cargo oil tanks for crude oil tankers of not less than 5000 tones deadweight, which are contracted for new building on or after 1 January 2013; or in the absence of a building contract, the keels of which are laid or which are at a similar stage of construction on or after 1 July 2013; or the delivery of which is on or after 1 January 2016. NOTE A crude oil tanker is an oil tanker engaged in the trade of carrying crude oil. This part of ISO 16145 applies to crude oil tankers and crude oil/product carriers as defined in items 1.11.1 or 1.11.4 of the Supplement to the International Oil Pollution Prevention Certificate (Form B).

Ships and marine technology - Protective coatings and inspection method - Part 3: Cargo oil tanks of crude oil tankers

ISO 3434:2012 船舶及海洋技术.船舶矩形窗加热玻璃

This International Standard specifies construction characteristics, optical qualities and heat current circuit, as well as the tolerances, tests, marking and designation of heated glass panes for ships’ rectangular windows of the heated series according to ISO 3903. It includes the conditions to comply with the safety of ships in times of frost and/or snow, particularly during manoeuvres in port. Heated glass panes are used on ships principally for the windows of wheel-houses and bridges, as well as in enclosed locations used for look-out and manoeuvring purposes. This International Standard specifies heated glass panes which are intended for use at temperatures down to -40 °C.

Ships and marine technology - Heated glass panes for ships' rectangular windows

ISO 21005:2012 船舶和海洋技术.窗户和舷窗用热钢化安全玻璃

This International Standard specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and flatness, testing, marking and designation of thermally toughened safety glass panes for windows complying with ISO 3903 and side scuttles complying with ISO 1751.

Ships and marine technology - Thermally toughened safety glass panes for windows and side scuttles

ISO 614:2012 船舶和海洋技术.舷窗和矩形窗用钢化玻璃.非破坏性强度试验中的冲压法

This International Standard specifies a method for the non-destructive breaking reliability testing of toughened safety glass panes for windows and side scuttles complying with ISO 21005.

Ships and marine technology - Toughened safety glass panes for rectangular windows and side scuttles - Punch method of non-destructive strength testing

DIN 83106:2011 船上重型铰链门和舱口用的异形垫圈

Profile gaskets for heavy hinged doors on ships and for hatches

CB/T 4138-2011 船用生活给排水塑料管

本标准规定了船用生活给排水聚乙烯和耐热聚乙烯塑料管的产品规格、技术要求、试验方法、检验规则等。 本标准适用于船舶与海上设施等生活区中使用的塑料管（包括饮用水管、冷热水管、灰水管、黑水管和舱室凝水管）的生产、试验和验收。 本标准不适用于塑料挠性管和软管。

Marine plastic pipes for supply and discharge sanitary water

CB/T 4184-2011 船舶涂料修补性能测定法

本标准规定了船舶涂料修补性能的测定原理、试验条件、试验程序、试验结果、试验报告等。 本标准适用于船舶涂料完整配套体系在已老化或破损的旧涂层上的修补性能试验。

Determination of repairability for ship coatings

CB/T 778-2011 船用柴油机钢锻件技术条件

本标准规定了船用柴油机钢锻件的要求、试验、检验规则、标志和质量合格证书。 本标准适用于中、低速船用柴油机碳素结构钢、合金结构钢、不锈钢、耐热钢等锻件（以下简称锻件）的制造和验收。 本标准不适用于船用柴油机曲轴锻件的制造和验收。

Specifications for marine diesel engine steel forging

UL MARINE PRODUCTS-2010 船用产品目录 2010

Part I of this Directory contains the names of companies authorized to use the UL Mark on or in connection with products that have been investigated by UL and found to be in compliance with UL’s requirements. These companies, as well as the manufacturers and submitters of the products, have entered into an Agreement with UL to use the UL Mark only on or in connection with products manufactured in compliance with UL’s requirements. It should be noted that UL certified products of different makes or model designations are not necessarily equivalent in quality or performance.

MARINE PRODUCTS DIRECTORY 2010

ANSI/ABYC T-1-2010 船和游艇应用的铝材料

This technical information report provides information on the use of aluminum for constructing outboard boats using riveted construction, outboard boats using welded construction, and inboard powered boats and yachts using welded construction.

Aluminum Applications for Boats and Yachts

GJB 6685-2009 舰船热反射涂料通用规范

本标准规定了舰船热反射涂料的通用要求。 本规范适用于舰船设计水线以上外表面部位的热反射涂料体系。

General specification for solar heat reflective coating on ship

JIS F 8052:2008 船舶和海洋技术 绝缘材料等级监控装置 设计

この規格は，船舶における500 V以下の非接地式交流配電系統及び24 V以下の非接地式直流配電系統に用いられる絶縁監視装置〔以下.装置という。)の性能，構造及び装備方法の設計基準について規定する。

Ships and marine technology -- Insulation level monitoring device -- Designs

CB 1124-2008 舰船用高强度船体结构钢焊接材料的鉴定、出厂和进货检验规则

本标准规定了船舶用屈服强度下小于355MPa的高强度船体结构钢焊接材料（以下简称焊接材料）的鉴定、出厂检验和进货检验的一般要求。 本标准适用于手工电弧焊焊条、埋弧焊焊条和焊剂、气体保护焊焊丝（含药芯焊丝）等焊接材料的鉴定检验、出厂检验和进货检验。

Inspection regulation of identification,manufacture and stock on welding consumables for high strength hull structural steel of ship

CB 1140-2008 潜望镜镜管毛坯规范

本规范规定了潜艇潜望镜镜管毛坯（以下简称毛坯）的要求、质量保证规定和交货准备等。 本规范适用于各型潜艇潜望镜镜管毛坯的设计、生产和验收。

Specification for rough of submarine periscope tube