U10 船舶总体综合 标准查询与下载

NAVY MIL-DTL-32123 A-2006  战列舰

This specification covers three types of polybutadiene base liner materials. They are as follows

LINER

CB/T 351-2005 船用平板式隔振器

本标准规定了船用平板式隔振器（以下简称隔振器）的要求、试验方法、检验规则及包装、运输。 本标准适用于隔振器的设计、生产和检验。

Plate type isolator of ship

CB/T 786-2005 船用圆筒形隔振器

本标准规定了船用圆筒形隔振器（以下简称隔振器）的要求、试验方法、检验规则及包装、运输。 本标准适用于隔振器的设计、生产和检验。

Circular type isolator of ship

KS V ISO 7838:2005 船舶型线.格式和数据结构

이 규격은 선체 정의를 위한 서로 다른 시스템 사이의 기하학적인 정보의 교환을 위한 자 료

Shiplines-Formats and data organization

KS V ISO 7460:2005 造船.船舶型线.几何型线的识别

이 규격은 조직 간 정보(information)의 전달을 요하는 선체 선도의 기하학적 형상

Shiplines-Identification of geometric data

KS V ISO 7461:2005 造船.船舶型线.船体几何图形构件的数字表示

이 규격은 선체를 정의하는 서로 다른 시스템 사이에 기하학적 자료의 상호 교환을 허용하 도

Shiplines-Numerical representation of elements ofthe hull geometry

CB/T 3035-2005 船舶倾斜试验

本标准规定了船舶倾斜试验的方法。 本标准适用于客船和按照1966年《国际载重线公约》定义的船长不小于24m的货船的试验。其他船舶的试验可参照使用。

Ship's inclining experiment

CB/T 3970-2005 船舶航速和操纵性的DGPS测试方法

本标准规定了用差分全球卫星定位系统(DGPS)接收机测试船舶航速和操纵性的方法。 本标准适用于用DGPS接收机对速度不大于50kn，加速度不大于5m/s的水面船舶进行航速试验和操纵性试验。

Measurement methods for ship speed and maneuverability with DGPS

CB/T 3484-2005 民用船舶修正总吨计算

本标准规定了民用船舶修正总吨的计算。 本标准适用于民用船舶相对造船量的统计。

Compensated gross ton calculation for civil ship

GJB 1446.1A-2005 舰船系统界面要求 基本要求

GJB 1446的本部分规定了舰船系统及设备间的界面的基本要求。 本部分适用于舰船系统及设备的研制、生产和使用。

Interface requirements for shipboard systems Basic requirements

ABS 138-2005 散装天然气压缩运载专用船只指南

This Guide provides requirements for design, construction and periodic surveys required for maintenance of classification that would be applicable to CNG carriers, where it is intended to obtain ABS class for the vessels. These requirements may also serve to satisfy Port State and Flag State Regulations as they develop. As these projects are still at the concept stage and various scenarios are being considered at this time, the objective will be to establish an overall philosophy or approach to provide a framework of reference material and cite precedence, where applicable, as to what methodologies followed by designers in similar projects have proven successful in the past. While it is certainly not the intent of the Bureau to in any way prevent or stifle creative development of new ideas and concepts, the Bureau will point out where a proposal appears to go beyond the bounds of what has been accepted practice in the past. In such cases, the Bureau will provide the designer with a list of steps considered necessary to establish that such a proposal, in fact, does not compromise the level of safety well established in the published Rules of the American Bureau of Shipping and those of applicable national and international Regulatory bodies. 2 Applicability of Existing ABS Rules and Regulatory Requirements

GUIDE FOR VESSELS INTENDED TO CARRY COMPRESSED NATURAL GASES IN BULK

JT/T 559-2004 珠江干线货运船舶船型主尺度系列

本标准规定了珠江干线自航干货船、液货船、多用途集装箱船、商品集装箱运输船和自卸砂船船型主尺度系列。 本标准适用于珠江干线的货运船舶，也适用于其支线的货运船舶。

Dimensions series standards of cargo vessel for Zhujiang mainriver

JT/T 349-2004 黑龙江水系推（拖）船系列

本标准规定了黑龙江水系推(拖)船系列的型号、主尺度、功率范围和标志牌等。 本标准适用航行于黑龙江水系(包括黑龙江、乌苏里江、松花江、嫩江等)的推(拖)船。

Tugboat series in the Heilongjiang waterway system

CB/Z 273-2004 潜艇下潜时间的测定

本指导性技术文件规定了潜艇实艇下潜时间测定的试验条件、试验准备和注意事项、试验步骤和数据记录。 本指导性技术文件适用于大、中型潜艇的试验。小型潜艇的试验可参照使用。

Measurement of diving time for submarine

CB/Z 210-2004 潜艇管路制造、安装和试验技术要求

本指导性技术文件规定了潜艇管路制造、安装和试验要求。 本指导性技术文件适用于潜艇各种管路系统。

Specification for manufacture fitting and testing of submarine piping

CB 1359-2002 舰船用橡胶隔振器规范

本规范规定了舰船用橡胶隔振器的要求、质量保证和交货准备等。 本规范适用于隔离舰船设备振动、冲击及降低结构噪声的以橡胶为弹性体的隔振器的设计、制造和验收。

Specification of rubber vibration isolator for warships

CB/T 257-2001 钢质海船船体密性试验方法

本标准规定了钢质海船船体密性试验的要求和试验方法。 本标准适用于钢质海船在设计、制造、修理或定期检查时进行的船体密性试验，不适用于半潜、深潜工作船的密性试验。

Test method of hull tightness for sea-going steel ships

DIN 80010-3 Bb.1:2000 海上技术的直观显示性能.第3部分:运行状况、报警、应答.直观显示性能的范例

Visual display performance-marine technology - Part 3: Working conditions, alarms, acknowledgements; examples for visual display performance

ISO 15402:2000 船舶与海上技术 散货船 船体结构的修理质量

This International Standard specifies the quality requirements for the hull structure maintenance and repair of steel bulk carriers. It does not apply to double-skin bulk carriers. Requirements for the construction of steel bulk carriers are given in ISO 15401.

Ships and marine technology - Bulk carriers - Repair quality of hull structure

ISO 15401:2000 船舶与海上技术 散货船 船体结构的建造质量

This International Standard specifies the quality requirements for the hull construction of steel bulk carriers. It does not apply to double-skin bulk carriers. Requirements for the maintenance and repair of steel bulk carriers are given in ISO 15402.

Ships and marine technology - Bulk carriers - Construction quality of hull structure