船舶总体综合标准-分析测试百科网

ANSI/ASTM F941:2000 船体表面准备和涂料涂敷检验规程

This practice is intended to serve as a guide for determining specific inspection requirements for marine surface preparation and coating application during new construction, major retrofit, or routine maintenance contracts. It is intended that this practice be used to coordinate inspection activities between ship owner, ship builder, coatings manufacturer and coatings applicator, and that specific requirements be developed before the commencement of surface preparation or coating application, or both. This practice does not provide a means of recording required data (for example, film thicknesses, temperatures, relative humidity, and so forth), but instead establishes a format for deciding what data must be recorded, when during the preparation/coating process, and by whom. This practice does not establish accept/reject criteria for surface preparation or coating inspection, nor does it address methods of repairing deficiencies found. It does, however, provide a means of determining them. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Inspection of Marine Surface Preparation and Coating Application

ICS: 47.020.05
CCS: U10
发布: 2000
实施

JT/T 393-1999 长江干线港口推、拖船船型系列

本标准规定了长江干线港口推、拖船船型系列及其主尺度和推荐主机功率。本标准适用于长江干线港口港内作业的推、拖船。

Ship form series of harbour pushboats/towboats on main waterway of Changjiang River

ICS
CCS: U10
发布: 1999-06-21
实施: 1999-10-01

CB/T 3913-1999 A型框架系列参数

Type A frame series parameters

ICS: 47.020.10
CCS: U10
发布: 1999-06-01
实施: 1999-06-01

JIS F 7206:1998 造船.吸入滤网盒

この規格は，ドルジ吸引管の端末に設けて，管が固形物では詰まらないようにするローズボックスの主要寸法を規定する。

Shipbuilding -- Strum boxes

ICS: 47.020.30
CCS: U10
发布: 1998-04-20
实施

JIS F 7203:1998 造船.机械设备空间和管道的舱底泥盒.一般设计特性

1.1この規格は，船の機械室及び軸室内で，ポンプとビルジ吸入口との間に使用するマッドポックスの設計の一般特性について規定する。1.2この規格は，マッドボックスの設計寸法及ぴ材料については規定しない。1.3この規格は，航洋船及び内陸航行船の双方に適用する。

Shipbuilding -- Bilge mud boxes for machinery spaces and tunnels -- General design characteristics

ICS: 47.020.30
CCS: U10
发布: 1998-04-20
实施

CB/Z 172-1997 潜艇舷侧附件安装要求

本标准规定了潜艇用舷侧附件的安装技术要求。本标准适用于工作压力不大于3MPa.以法兰形式与焊接在耐压船体上的座板或杯形管节相连接的舷侧附件。

Requirment of hull accessory installation for submarine

ICS: 47.020.10
CCS: U10
发布: 1997-12-26
实施: 1998-06-01

CB/Z 261-1997 潜艇适航性预报方法

本标准规定了潜艇适航性预报方法。本标准适用于各种类型潜艇的适航性预报。其主要限于对艇体波浪中运动性能的预报。

Prediction method for seaworthiness of submarine

ICS: 47.020
CCS: U10
发布: 1997-10-17
实施: 1998-06-01

ASTM F1754-97(2004) 海上船支结构检验依据的标准指南

1.1 this guide provides information to develop and implement marine vessel inspection process. It is intended to provide considerations for persons interested in planning, organizing, and implementing a structural survey plan for a marine vessel especially during the design phase of the vessel. It is intended to be used in conjunction with any other required inspection or survey requirements but can form the basis for such planning in the absence of other such applicable requirements.

Standard Guide for Marine Vessel Structural Inspection Considerations