U11 船舶理论与船模试验 标准查询与下载

ASTM F1808-03(2008) 水面舰艇重量控制技术要求的标准指南

It is important to know the amount of weight and its location before the ship is built to be sure that when it is built it will have positive stability. Only through detailed weight estimating in the design stage and during construction can one be ensured that positive stability will be achieved and retained.1.1 This guide provides recommended weight control technical requirements for surface ships and discusses different types of weight estimates, reports, and weight control procedures. It contains a weight classification that will assist in achieving uniformity by standardizing the weight-reporting system. 1.2 This guide is applicable to ships designed and constructed in inch-pound units of measurement and to ships designed and constructed in SI units of measurement. Whenever inch-pound units are shown or referred to in the text, or in example formats included in this guide, it is to be understood that corresponding SI units may be substituted if applicable to a ship designed and constructed in SI units, provided that whichever system is used, it is consistently used in all weight control reporting documentation for the ship.

Standard Guide for Weight Control Technical Requirements for Surface Ships

CB/Z 268-2002 潜艇操纵性水动力模型试验方法

本指导性技术文件规定了潜艇水下(深水状态)操纵性水动力的拘束模试验方法。 本指导性技术文件适用于潜艇水下(深水状态)操纵性水动力拘束模试验。

Method for performing captive-model test of submarine maneuverability

NAVY MIL-PRF-32070-2002 测试程序集

This specification covers the technical requirements for Test Program Sets (TPSs) (see 6.4.25).

TEST PROGRAM SETS [Superseded: NAVY MIL-STD-2077 B CANC NOTICE 2, NAVY MIL-STD-2077 B CANC NOTICE 1, NAVY MIL-STD-2077 B, NAVY MIL-STD-2077 A, NAVY MIL-STD-2077]

NAVY MIL-R-81498 C NOTICE 2-1999 AN/ARA-63型接收解码组

This notice should be filed in front of MIL-R-8 1498C(AS) dated 15 April 1988.

RECEIVING-DECODING GROUP AN/ARA-63

CB/T 346-1997 螺旋桨模型敞水试验方法

本标准规定了船用螺旋桨模型敞水试验方法。 本标准适用于拖曳水池舰船螺旋桨模型敞水试验。

The method of open water test for a model propeller

CB/T 347-1997 一般排水型船船模单桨自航试验方法

本标准规定了一般排水型船船模单桨自航试验和实船快速性能的预报方法。 本标准适用于一般排水型船船模单桨自航试验及其实船快速性能的预报。

Test method of single screw model self-propulsion for general displacement ship

CB/Z 259-1996 潜艇空间机动控制规律

本标准规定了潜艇空间机动自动操舵的控制规律及选取相应控制参数的一般原则。 本标准适用于大、中型潜艇自动操舵系统控制规律的设计及其仿真试验、陆上联调试验和航行试验。不适用于潜艇倒车工况。

Laws of Submarine Space Maneuvering Control

CB/T 3675-1995 水面船模耐波性试验规程

本标准规定了水面船模耐波性试验的相似模拟要求、试验程序、试验结果的分析和表达。 本标准适用于排水量船模的耐波性试验，对特殊船舶的模型耐波性试验可参照执行。

Code for seakeeping test of surface ship model

NAVY MIL-R-81498 C (3)-1993 AN/ARA-63型接收解码组

This amendment forms a part of MIL-R-81498C(AS), dated 13 December 1979, and is approved for use by the Naval Air Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

RECEIVING-DECODING GROUP AN/ARA-63

CB/T 3471-1992 风、浪、流联合作用下浮式系统模型试验规程

本标准规定了风、浪、流联合作用下浮式系统模型试验的试验程序和试验结果的统一表达。 本标准适用于浮式系统在风、浪、流联合作用下的水池模型试验。也适用于上述系统在波浪中或浪-风及浪-流任意两种环境条件下联合作用时的水池模型试验。

Code for model test of floating system under the combined action of wind, wave and current

ASTM F1321-92(2008) 测定船舶重心和空载排水量的稳定试验(空船重量调查和倾斜试验)的标准指南

From the light ship characteristics one is able to calculate the stability characteristics of the vessel for all conditions of loading and thereby determine whether the vessel satisfies the applicable stability criteria. Accurate results from a stability test may in some cases determine the future survival of the vessel and its crew, so the accuracy with which the test is conducted cannot be overemphasized. The condition of the vessel and the environment during the test is rarely ideal and consequently, the stability test is infrequently conducted exactly as planned. If the vessel is not 100 % complete and the weather is not perfect, there ends up being water or shipyard trash in a tank that was supposed to be clean and dry and so forth, then the person in charge must make immediate decisions as to the acceptability of variances from the plan. A complete understanding of the principles behind the stability test and a knowledge of the factors that affect the results is necessary. 1.1 This guide covers the determination of a vessel''s light ship characteristics. The stability test can be considered to be two separate tasks; the lightweight survey and the inclining experiment. The stability test is required for most vessels upon their completion and after major conversions. It is normally conducted inshore in calm weather conditions and usually requires the vessel be taken out of service to prepare for and conduct the stability test. The three light ship characteristics determined from the stability test for conventional (symmetrical) ships are displacement (“displ”), longitudinal center of gravity (“LCG”), and the vertical center of gravity (“KG”). The transverse center of gravity (“TCG”) may also be determined for mobile offshore drilling units (MODUs) and other vessels which are asymmetrical about the centerline or whose internal arrangement or outfitting is such that an inherent list may develop from off-center weight. Because of their nature, other special considerations not specifically addressed in this guide may be necessary for some MODUs. 1.2 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

STAS 7075-1990 机械制造技术文献．母文件修改规定

1.1.1 Prezentul standard stabile?te regulile de efectuare a modific?rilor ?n documenta?ia de baz? (desene ?i documente scrise) din construc?ia de ma?ini. Se recomand? ca prevederile standardului s? fie aplicate ?i altor categorii de documente ale do

Technical documentation in machine building. Rules for modifications in basic documentation

CB/Z 246-1988 自稳式水翼艇模型阻力试验规程

Specification of Model Resistance Test for Self-stabilized Hydrofoil Craft

CB/Z 250-1988 潜艇操纵性设计计算方法

Calculation Method for Submarine Manoeuvrability

CB/Z 244-1988 滑行艇船模阻力测试方法

Method of Model Resistance Measurement for Planning Craft

CB/Z 252-1988 潜艇自航模操纵性试验规程

Trial Code of Manoeuvrability for Free Running Submarine Model

CB/Z 248-1988 水面舰船模波浪载荷测试规程

Specification of Wave Load Measurement for Model of Naval Surface Ship

NAVY MIL-R-81498 C VALID NOTICE 1-1988 AN/ARA-63型接收解码组

MIL-R-81498C(AS), dated 13 December 1979, and AMENDMENT 2, dated 15 May 1981, have been reviewed and deterrni ned to be current.

RECEIVING-DECODING GROUP AN/ARA-63

CB/Z 240-1987 船舶操纵运动数学模型

Standard Mathematical Models for Ship Manoeuvering Motions

CB/Z 239-1987 一般排水量船模双桨自航试验方法

Procedure of Self-Propulsion Tests for Twin-Screw Displacement Ships