共找到 64 条与 舾装设备综合 相关的标准,共 5 页
This Standard specifies minimum requirements for a supplier’s quality assurance program-Category 1. The supplier is responsible for planning and developing a program which assures that each management, design, and technical responsibility for quality is
Standard of Competence for Diving Operations, second edition; Update #1: November 2003; Update #2: August 2004
Ship equipment of fiberglass reinforced plastics for fishing vessel
本标准规定了舫装件在玻璃俐渔船上安装所需预埋件的基本结构型式、连接方法和技术要求。 本标准适用于玻璃钢渔船。
Technical demand of install outfit for fiberglass reinforced plastics fishing vessel
1.1 This specification covers the design, manufacture, performance, operation, functioning, and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship''s normal service (that is, maintenance, operational, domestic, and cargo-associated wastes). 1.2 This specification is a companion document to Guide F1322. 1.3 This specification applies to those incinerator plants with capacities up to 1500 kW per unit.1.4 Additional information is given in Appendix X1 - Appendix X9. 1.5 This specification does not apply to systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, etc. 1.6 This specification does not address the electrical supply to the unit, nor the foundation connections and stack connections. 1.7 This specification does not cover emissions requirements. 1.8 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. If an incinerator is to be operated in littoral regions, the strictest governing regulations for those countries in which the incinerator may operate would form the requirement basis. See 5.11.
Standard Specification for Shipboard Incinerators
The document specifies extra light flanges for castings.
Ships and marine technology - Flanges on castings extra light duty - DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10 - Principles of design
These welding necks are used together with loose flanges according to DIN 85387-1 in pipelines on light and fast ships.
Ships and marine technology - Loose flanges and welding necks extra light duty - Part 2: Welding necks made of CuNi10Fe1,6Mn, DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10
These loose flanges are used together with welding necks according to DIN 85387-2 in pipelines on light and fast ships.
Ships and marine technology - Loose flanges and welding necks extra light duty - Part 1: Loose flanges DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10
This practice covers the acceptable methods of fitting chocks to marine machinery foundations. The values stated in SI units shall be regarded as standard. The values in parentheses are for information only. This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
1.1 This specification covers the design, manufacture, performance, operation, functioning, and testing of incinerators intended to incinerate garbage and other shipboard wastes generated during the ship''s normal service (that is, maintenance, operational, domestic, and cargo-associated wastes). 1.2 This specification is a companion document to Guide F1322. 1.3 This specification applies to those incinerator plants with capacities up to 1500 kW per unit.1.4 Additional information is given in Appendix X1 - Appendix X9. 1.5 This specification does not apply to systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, etc. 1.6 This specification does not address the electrical supply to the unit, nor the foundation connections and stack connections. 1.7 This specification does not cover emissions requirements. 1.8 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. If an incinerator is to be operated in littoral regions, the strictest governing regulations for those countries in which the incinerator may operate would form the requirement basis. See 5.11.
Standard Specification for Shipboard Incinerators
This specification covers cast sound-signalling bells, together with bulkhead mounting plates for the smaller bells, for use on ships, boats, and other marine craft, for compliance with the rules in the convention on the International Regulations for Preventing Collisions at Sea (commonly called Colregs). See Appendix X1. Bells and bulkhead mounting plate shall be sized as indicated in Section 4 (see Appendix X2). For consistency with International Regulations, all measurements are in SI units.
Specification for Bell, Cast, Sound Signaling
This specification covers gongs for use on ships 100 m or more in length, as required by International Regulations (see Appendix X1). For consistency with International Regulations, all measurements are in SI units.
Specification for Gong, Sound Signaling
L'Association canadienne de normalisation (BA), sous les auspices de laquelle cette Norme nationale a été préparée, a re?u ses lettres patentes en 191 9 et son accréditaüon au sein du S y s t h de normes nationales par le Conseil canadien des normes en 1
Norme De Competence Pour Les Operations De Plongee Fiche No. 1-2
This specification covers the design, materials, and construction of strainer boxes for use in ships' bilges and other such tank locations that require trash protection for suction pipes and pumps. This specification covers pipe sizes from NPS 11/2 through NPS 16 (see Note 1). Note 1 -The dimensionless designator NPS (nominal pipe size) has been substituted in this specification for such traditional terms as "nominal diameter, " "size, " and "nominal size." The values stated in inch-pound units are to be regarded as the standard.
Specification for Suction Strainer Boxes
ML-M-35670A is inactive ?ur new design and is no longer used except for rcpbment purposes.
MAST AB-621()/G
The General Services Administration has authorized the use of this commercial item description as a replacement for MIL-E-15330 which is canceled in part.
EXPANSION JOINT, SLEEVED, (NON-FLANGED), FIRE-RETARDANT, WITH RETAINING CLAMPS
This amendment forms a part MoIfL -D-16791G dated 26 January 1990, and is approved for use by all Departments and Ageonfc itehse Department of Defense.
DETERGENTS, GENERAL PURPOSE (LIQUID, NONIONIC)
Regles De Securite Pour Les Travailleurs En Plongee Fiche No 1
Safety Regulation for Diving Personnel.General Instruction No1
Specification for Bell, Cast, Sound Signaling
Specification for Gong, Sound Signaling
1.1 This guide covers selection criteria to assist procurers in selecting the appropriate incinerator for their needs.1.2 This guide is a companion document to Specification F 1323.1.3 This guide does not apply to incinerator systems on special incinerator ships, for example, for burning industrial wastes such as chemicals, manufacturing residues, and so forth.
Standard Guide for Selection of Shipboard Incinerators
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号