U44 船用内燃机 标准查询与下载

GJB 6850.55-2009 水面舰船系泊和航行试验规程 第55部分：柴油机推进系统自动控制和监测系统试验

Mooring and sailing test procedures for surface ships Part 55: Diesel engine propulsion system automatic control and monitoring system test

GJB 6850.164-2009 水面舰船系泊和航行试验规程 第164部分：油水代换系统试验

Mooring and sailing test procedures for surface ships part 164: oil-water exchange system test

GJB 6850.48-2009 水面舰船系泊和航行试验规程 第48部分：滑油系统试验

Mooring and sailing test procedures for surface ships part 48: Lubricating oil system test

GJB 6850.163-2009 水面舰船系泊和航行试验规程 第163部分：燃油注入、转运和贮存系统试验

Surface Vessel Mooring and Sea Trial Procedures Part 163: Fuel Oil Injection, Transfer and Storage System Tests

GJB 6681-2009 舰船喷水推进装置规范

本规范规定了舰船喷水推进装置(以下简称喷推)的要求、质量保证、交货准备等。 本规范适用于水面舰船用喷推的设计、制造、检验验收。

Specification for waterjet unit of naval ships

GJB 1176B-2009 20号舰用柴油机油规范

本规范规定了20号舰用柴油机油的要求。

Specification for naval diesel engine oils of No.20

NF M88-790:2009 液化石油气(LPG)设备和附件.船舶、游艇和其它小型船用LPG推进系统.安装要求

LPG Equipment and accessories - LPG propulsion systems for boats, yachts and other craft - Installation requirements.

SANS 13591:2008 小艇.舷外机便携式燃油系统

Specifies requirements for the design, materials and testing of portable fuel systems with a rated capacity of 27 L or less for carrying and storage of flammable liquids used for outboard motors installed on small craft with up to 24 m length of hull. Do

Small craft - Portable fuel systems for outboard motors

SANS 13592:2008 小艇.汽油发动机逆火火焰控制

Specifies the minimum requirements for construction and testing of engines and devices to prevent the propagation of backfire flames from permanently installed inboard petrol engines to the surrounding atmosphere in small craft of length of the hull up t

Small craft - Backfire flame control for petrol engines

SANS 8665:2008 小艇.海运推进式往复内燃机.功率测量和声明

Specifies the requirements additional to ISO 15550 for determining the power of marine propulsion reciprocating internal combustion (RIC) engines when presented for documenting and checking of the declared (rated) power published by the manufacturer. App

Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations

SANS 8849:2008 小艇.电动直流舱底泵

Specifies requirements for electrically operated direct-current bilge pumps intended for use in removing bilge water from small craft of hull length up to 24 m. Applies to electrically operated bilge pumps rated for less than 50 V direct current. Does no

Small craft - Electrically operated direct-current bilge pumps

SANS 15584:2008 小艇.舷内汽油机.机装燃油和电气部件

Specifies requirements for the design and installation of engine-mounted fuel and electrical system components on inboard petrol engines for minimizing fuel leakage and protecting against ignition of surrounding flammable gases on small craft of hull len

Small craft - Inboard petrol engines - Engine-mounted fuel and electrical components

SANS 16147:2008 小艇.舷内柴油机.机装燃油和电气部件

Establishes requirements for the design and installation of engine-mounted fuel and electrical components on diesel inboard-mounted engines for minimizing fuel leakage and the risk or the spread (or both) of fire on small craft of hull length up to 24 m.

Small craft - Inboard diesel engines - Engine-mounted fuel and electrical components

SAE J2046-2008 个人水上运输工具燃料系统

This SAE Standard applies to permanently installed gasoline fuel systems in personal watercraft as defined in 2.2, except fuel systems on outboard engines.1.1 PurposeThis document specifies guidelines for fuel systems of personal watercraft. This document is intended as a guide toward standard practice and is subject to change to keep pace with experience and technical advances.

Personal Watercraft Fuel Systems

CB/T 3850-2008 船用分流式离心润滑油滤清器

本标准规定了船用分流式离心润滑油滤清器（以下简称滤清器）的分类和标记、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于滤清器的设计、制造和检验。

Marine by-pass centrifugal lubricant filters

CB/T 3260-2008 船舶大功率主柴油机遥控装置

本标准规定了船舶大功率主柴油机遥控装置（以下简称遥控装置）的要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于由一台可逆转主柴油机直接带动或通过减速齿轮传动单轴螺旋浆（其能量传送可以采用电、气、液或电-气、电-液等方式）的大功率机组（不包括可调螺距及多台柴油机带动单轴螺旋浆的机组）的遥控装置的设计、制造和验收。

Marine remote control device of high-power main diesel engine

CB 1398-2008 舰船用滑油、燃油滤清器规范

本标准规定了舰船用滑油、燃油滤清器（以下简称滤清器）的要求、质量保证规定和交货准备等。 本标准适用于工作介质为滑油、燃油的全流式滤清器的设计、制造和验收。

Specification for lubricating oil and fuel oil filters of ships

CB 1390-2008 舰用柴油机排气系统消声器规范

本规范规定了舰用柴油机排气系统消声器（以下简称消声器）的要求、质量保证规定和交货准备。 本规范适用于消声器的研制、生产和验收。

Specification of exhaust system silencers of ship diesel engine

CB/T 697-2008 船用柴油机活塞销

本标准规定了船用柴油机活塞销（以下简称为活塞销）的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于活塞销的设计、制造和验收。

Marine piston pin of diesel engine

CB/T 699-2008 船用柴油机连杆

本标准规定了船用柴油机连杆（以下简称为连杆）的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于连杆的设计、制造和验收。

Connecting rod of marine diesel engine