V06 环境条件 标准查询与下载

ARMY A-A-52432 A-1995 汽车外部安装后视镜装配

This CID covers exterior-mounted, automotive rearview mirror assemblies.

MIRROR ASSEMBLY, REARVIEW: AUTOMOTIVE EXTERIOR MOUNTING

HB 6751-1993 军用飞机环境控制系统通用试验要求

本标准规定了军用飞机环境控制系统试验的通用要求。 　　本标准适用于军用飞机环境控制系统的试验。若偏离或超过本标准规定的要求，应进行说细论证和具体协调后确定。

General test requirements for military aircraft environmental control system

HB 7122.4-1994 民用飞机机载设备气候环境试验箱（室）检定方法 防水试验箱（室）

本标准规定了防水试验箱（室）的检定方法。本标准是《民用飞机机载设备气候环境试验箱（室）检定方法》系列标准的组成部分。 　　本标准适用于按HB 6167.8《民用飞机机载设备环境条件和试验方法 防水试验》进行试验时所用的试验箱（室）的检定。

Civil aircraft airborne equipment climate environment test box (room) verification method waterproof test box (room)

SAE AMS1448A-1994 机场的沙,雪,冰控制

This specification covers natural sand in granular form. This sand has been used typically to improve the frictional properties of runway, taxiway, and ramp surfaces for aircraft braking purposes, but usage is not limited to such applications.

Sand, Airport Snow and Ice Control

AECMA PREN 2869-1993 航空和航天系列1 100MPa(室温)/650℃

This standard specifles the requirements relating to gold base braze filler metal AU-B40001 in powder or paste form for aerospace applications.

Aerospace Series Nuts, Hexagonal, Slotted/Castellated, Normal Height, Normal Across Flats, in Heat Resisting Steel, Passivated Classification : 1 100 MPa (at Ambient Temperature) / 650 Degrees C Edition P 1

AECMA PREN 2868-1993 航空和航天系列1 100 MPa(室温)/650℃

This standard specifies the required characteristics for lamp, code 7683, used on-board aircraft. It shall be used together with EN 2756.

Aerospace Series Nuts, Hexagonal, Slotted/Castellated, Normal Height, Normal Across Flats, in Heat Resisting Steel, Silver Plated Classification : 1 100 MPa (at Ambient Temperature) / 650 Degrees C Edition P 1

AECMA PREN 2863-1993 航空和航天系列 1 100 MPa(室温)/315℃

This "Aerospace Series'' pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Nuts, Anchor, Self-Locking, Fixed, 90 Degree Corner, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/315 Degrees C Edition P 1; Corrigendum 05/10/1993

AECMA PREN 2865-1993 航空和航天系列 1 100 MPa(室温)/315℃

This "Aerospace Series" pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Nuts, Anchor, Self-Locking, Floating, Two Lug, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 100 MPa (at Ambient Temperature)/315 Degrees C Edition P 1

ISO 7137:1992 飞机.机载设备的环境条件和试验程序

Aircraft; environmental conditions and test procedures for airborne equipment

AECMA PREN 2866-1992 航空和航天系列 1 100 MPa(室温)/315℃

This

Aerospace Series Nuts, Anchor, Self-Locking, Floating, One Lug, with Counterbore, in Steel, Cadmium Plated, MoS2 Lubricated Classification : 1 110 MPa (at Ambient Temperature) / 235 Degrees C Issue P 1

AECMA PREN 2867-1992 航空和航天系列 1 100 MPa(室温)/315℃

This «Aerospace Series. pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved b y the experts of the concerned Commission following comment by the Member countries.

Aerospace Series Nuts, Anchor, Self-Locking, Floating, One Lug, with Counterbore, in Heat Resisting Steel, MoS2 Lubricated Classification : 1 110 MPa (at Ambient Temperature) / 315 Degrees C Issue P 1

NAVY MIL-C-29240 VALID NOTICE 1-1991 用于医院的实验室和药房转换和固定的生活环境调查的性能规格

MIL-C-29240, dated 10 May 1985, has been reviewed and determined to be valid for use in acquisition.

PERFORMANCE SPECIFICATIONS FOR CASEWORK, MOVEABLE AND MODULAR, FOR HOSPITAL LABORATORIES AND PHARMACIES

AECMA PREN 2869-1991 航空和航天系列1 100 MPa(室温)/650℃

This d r a f t is now a v a i l a b l e f o r public comment and your views and t e c h n i c a l comments on it would be appreciated. I f you have no s p e c i f i c comments to make but find it g e n e r a l l y acceptable it would be h e l p f u l if you would n o t i f y us accordingly. Suggestions e n t a i l i n g r e v i s i o n of the texP: should i n d i c a t e ehe p r e f e r r e d wording.

Aerospace Series Nuts, Hexagonal, Slotted/Castellated, Normal Height, Normal Across Flats, in Heat Resisting Steel, Passivated Classification : 1100 MPa (at Ambient Temperature) / 650 Degrees Celsius Edition 1

ISO 5878:1982/Amd 1:1990 航空航天用参考大气 修改1

Mainly amends numerical values in table 4 on page 7, table 10 on page 13, table 13 on page 16, table 16 on page 20, tables 17 and 18 on page 21, table 21 on pages 24 to 27, table 22 on page 28. Modifies curves in figures 1 and 3 on pages 34 and 36.

Reference atmospheres for aerospace use; amendment 1

DIN 65092:1990 航空航天.飞机设备的环境试验.电气设备绝缘电阻和高压试验.与ISO 2678-1985等同

The standard contains the measurements of insulation resistance and high voltage testing for aircraft equipment. It is the german edition of the international standard ISO 2678, edition 1985.#,,#

Aerospace; environmental tests for aircraft equipment; insulation resistance and high voltage tests for electrical equipment; identical with ISO 2678:1985

DLA MS16627 REV B-1990 (圆锥截面类型)外部转换护环[参考:ASME B18.24.3, ASME B18.24.3]

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RING, RETAINING, INTERNAL, INVERTED (TAPERED SECTION TYPE) [Refer To: ASME B18.24.3, ASME B18.24.3]

DLA MS16631 REV D-1990 (圆锥截面类型)外部斜面护环[参考:ASME B18.24.3, ASME B18.24.3]

This specification covers the press section of the Modular Printing System (see 6. i).

RING, RETAINING, INTERNAL, BEVELED (TAPERED SECTION TYPE) [Refer To: ASME B18.24.3, ASME B18.24.3]

DLA MS16628 REV B-1990 (圆锥截面类型)外部弯曲护环

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RING, RETAINING, EXTERNAL, BOWED (TAPERED SECTION TYPE)

DLA MS16634 REV B-1990 外部弯曲护环

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

RING, RETAINING, EXTERNAL, BOWED"E" (REDUCED SECTION TYPE) [Refer To: ASME B18.24.3, ASME B18.24.3]

DLA MS16633 REV C-1990 外部护环

GROOVE BOTTOM RADII (MAX.)WFT DIAS. .040,.062=~PCORNERS

RING, RETAINING, EXTERNAL,"E" (REDUCED SECTION TYPE) [Refer To: ASME B18.24.3, ASME B18.24.3]