V21 管件、卡箍、密封件 标准查询与下载

BS 2HR 404:2011 耐热镍钴铬钼钛铝合金无缝管的规格(镍基Co20-Cr20-Mo5.9-Ti2.1-Al0.5)

Specification for nickel-cobalt-chromium-molybdenum- titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)

BS 3HR 401:2011 镍铬钛铝耐热合金无缝钢管规格(镍基Cr19.5-Ti2.2-Al1.4)

Specification for nickel-chromium-titanium-aluminium heat-resisting alloy seamless tubes (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)

SAE AS5958D-2011 操作压力小于等于5080 psi(35000 kPa)的流体系统用带直口可分离的轴向型锻管道配件规范

This SAE Aerospace Standard (AS) establishes the requirements for externally swaged titanium tube fittings on titanium and CRES tubing with flareless separable fitting for use in hydraulic supply and return aerospace fluid systems up to operating pressure of 5080 psig (35 000 kPa) maximum and an operating temperature range of -65 to +275 °F (-54 to +135 °C). This specification covers a common 5080 psi pressure titanium fitting that may be used for a range of operating pressures up to 5080 psi with different tubing materials and tubing wall thicknesses, and is assembled with the same tooling in accordance with AS5959. The fitting operating pressure is based on the fitting thread pitch. Extra fine pitch for 5080 psi operating pressure and fine pitch for operating pressures 3000 psi and less. Table 12 shows applicable aerospace fitting part number standard and tubing materials and operating pressures.

Fittings, Axially Swaged Tube with Flareless Separable, Fluid System For Operating Pressures up to and including 5080 psi (35 000 kPa), Specification for

SAE AS81914/6-2011 标准回旋式四氟乙烯(ETFE)螺旋回旋状柔性塑料管

THIS DOCUMENT COMPLETELY REVISED, INCLUDING RE-FORMATTING TO AN AEROSPACE STANDARD (AS) UNDER THE JURISDICTION OF SAE AE8-C1 FROM AN AEROSPACE MATERIAL SPECIFICATION UNDER THE JURISDICTION OF SAE AMS 'P' COMMITTEE, TO PROPERLY CLASSIFY AND SUPERSEDE AMS-T-81914/6 MATERIAL SPECIFICATION INCLUDING THE INCORPORATION OF COMMENTS RECEIVED FROM GOVERNMENT AND INDUSTRY, UP-DATE SPECIFICATION REFERENCES, ALIGN WITH SAE GUIDELINES AS NEEDED, INCORPORATE MATERIAL UPDATES, CLARIFY PART NUMBERING, ADD METRICS AND REVIEW FOR KNOWN TECHNICAL PROBLEMS.

Tubing, Plastic, Flexible, Convoluted, Helical, Ethlyene Tetrafluoroethylene (ETFE) Standard Convolutions

SAE AS81914/1-2011 标准回旋式聚四氟乙烯(PTFE)螺旋回旋状柔性塑料管

THIS DOCUMENT COMPLETELY REVISED, INCLUDING RE-FORMATTING TO AN AEROSPACE STANDARD (AS) UNDER THE JURISDICTION OF SAE AE8-C1 FROM AN AEROSPACE MATERIAL SPECIFICATION UNDER THE JURISDICTION OF SAE AMS 'P' COMMITTEE, TO PROPERLY CLASSIFY AND SUPERSEDE AMS-T-81914/1 MATERIAL SPECIFICATION INCLUDING THE INCORPORATION OF COMMENTS RECEIVED FROM GOVERNMENT AND INDUSTRY, UP-DATE SPECIFICATION REFERENCES, ALIGN WITH SAE GUIDELINES AS NEEDED, INCORPORATE MATERIAL UPDATES, CLARIFY PART NUMBERING, ADD METRICS AND REVIEW FOR KNOWN TECHNICAL PROBLEMS.

Tubing, Plastic, Flexible, Convoluted Helical, Polytetrafluoroethylene (PTFE) Standard Convolutions

SAE AS81914/7-2011 一体化编织(S)回旋状柔性塑料管

THIS DOCUMENT COMPLETELY REVISED, INCLUDING RE-FORMATTING TO AN AEROSPACE STANDARD (AS) UNDER THE JURISDICTION OF SAE AE8-C1 FROM AN AEROSPACE MATERIAL SPECIFICATION UNDER THE JURISDICTION OF SAE AMS 'P' COMMITTEE, TO PROPERLY CLASSIFY AND SUPERSEDE AMS-T-81914/7 MATERIAL SPECIFICATION INCLUDING THE INCORPORATION OF COMMENTS RECEIVED FROM GOVERNMENT AND INDUSTRY, UP-DATE SPECIFICATION REFERENCES, ALIGN WITH SAE GUIDELINES AS NEEDED, INCORPORATE MATERIAL UPDATES, CLARIFY PART NUMBERING, ADD METRICS AND REVIEW FOR KNOWN TECHNICAL PROBLEMS.

TUBING, PLASTIC, FLEXIBLE, CONVOLUTED WITH INTEGRAL BRAID (S)

SAE AS81914/9-2011 标准回旋过氟烷氧基(PFA)螺旋盘绕易弯曲塑料管道系统

THIS DOCUMENT IS A NEW DETAIL SHEET DESCRIBING THE REQUIREMENTS FOR CONVOLUTED TUBING PRODUCED FROM PFA MATERIAL.

Tubing, Plastic, Flexible, Convoluted, Helical, Perfluoroalkoxy (PFA) Standard Convolution

DIN EN 4025:2011 航空航天系列.钛合金8°30'管连接件.隔板45°弯头;德文版本和英文版本EN 4025-2010

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°, bulkhead; German and English version EN 4025:2010

DIN EN 3274:2011 航空航天系列.管联接器8°30'- 螺纹端部.几何构型;德文和英文版本EN 3274-2010

Aerospace series Pipe coupling 8°30' - Thread end - Geometric configuration; German and English version EN 3274:2010

DIN EN 4023:2011 航空航天系列.钛合金8°30<分钟>管连接件.隔板45°;德文版本和英文版本EN 4023-2010

Aerospace series - Pipe coupling 8°30' in titanium alloy - Elbows 45°; German and English version EN 4023:2010

SAE AIR6079-2010 航空航天用金属弹簧通电密封件的筛选

The purpose of this report is to provide design, application and maintenance engineers with basic information on the use of metallic Spring Energized sealing devices when used as piston (OD) and rod (ID) seals in aircraft fluid power components such as actuators, valves, and swivel glands. The Spring Energized seal is defined and the basic types in current use are described. Guidelines for selecting the type of Spring Energized seal for a given design requirement are covered in terms of friction, leakage, service life, installation characteristics, and interchangeability. Spring Energized seals can also be made in various forms and types, including face seals (internal and external pressure sealing types), and rotary variants too. These further types will not be discussed in this document, but many of the same principles apply for them as well.

Selection of Metallic Spring Energized Seals for Aerospace

BS EN 3274:2010 航空航天系列.8°30'管连接件.螺纹端.几何配置

This standard specifies the characteristics of the thread end for 8°30' pipe couplings, nominal pressure up to 28 000 kPa, for aerospace applications.

Aerospace series. Pipe coupling 8°30'. Thread end. Geometric configuration

BS EN 4025:2010 航空航天系列.钛合金8°30'管连接件.隔板45°弯头

This standard specifies the characteristics of elbows 45°, bulkhead, for pipe couplings 8°30', in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa. Temperature range: – 55 °C to 135 °C.

Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°, bulkhead

BS EN 4023:2010 航空航天系列.8°30'钛合金管连接件.45°弯头

This standard specifies the characteristics of elbows 45°, for pipe couplings 8°30', in titanium alloy, for aerospace applications. Nominal pressure: up to 28 000 kPa. Temperature range: – 55 °C to 135 °C.

Aerospace series. Pipe coupling 8°30' in titanium alloy. Elbows 45°

SAE AS4704C-2010 阳性直通对阳性直通的饮用水固定空腔耦合125 psi内衬硅胶软管总成

HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT MALE TO STRAIGHT MALE

SAE AS4798C-2010 阴性直通对阳性90°的饮用水固定空腔耦合125 psi内衬硅胶软管总成

HOSE ASSEMBLY, LINED SILICONE, 125 PSI, FIXED CAVITY COUPLING, POTABLE WATER, STRAIGHT FEMALE TO 90 DEGREES MALE

SAE AS4706C-2010 阳性直通对阳性90°的饮用水固定空腔耦合125 psi内衬硅胶软管总成

Hose Assembly, Lined Silicone, 125 psi, Fixed Cavity Coupling, Potable Water, Straight Male to 90° Male

BS ISO 12573:2010 飞行器.管道系统公差.英制系列

Aircraft. Tubing tolerances. Inch series

DIN EN 4536-2:2010 航空航天系列.带自润滑衬垫,高架载荷抗腐蚀钢平轴衬.第2部分:尺寸规格和载荷.英制系列.德文和英文版本EN 4536-2-2009

Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series; German and English version EN 4536-2:2009

DIN EN 4113:2010 航空航天系列.带橡胶垫圈的钝化耐腐蚀钢环状夹具("P" 型).尺寸规格和质量.德文和英文版本EN 4113-2009

Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated, with rubber cushioning - Dimensions, masses; German and English version EN 4113:2009