Y33 纸制品 标准查询与下载

KS M 7048-2000 造纸用纸浆纤维分类试验方法

이 규격은 제지용 펄프의 섬유 분류 시험 방법에 대하여 규정한다.

Testing method for fiber classification of pulp for paper

KS M 7075-2000 纸的油渗透性测试方法(蓖麻油试验)

이 규격은 흡수 시간을 측정하는 종이의 피마자유 흡유도 시험 방법에 대하여 규정한다.

Testing method for oil absorptiveness of paper(castor oil method)

KS M 7039-2000 纸浆中有机溶剂抽出物含量的测定

이 규격은 펄프의 유기 용매 추출분 시험 방법에 대하여 규정한다.

Testing method for organic solvent extractives in pulp

ASTM D3208-00 永久记录用复写纸的标准规范

1.1 This specification covers manifold papers used in preparing typewritten copies of permanent or semipermanent records and documents. The original, or ribbon, copy usually leaves the organization in which it originated, so the carbon copy becomes the copy of record. 1.2 It has been shown (1, 2, 3, 4, 5) that permanence is at least an approximate function of the pH of an aqueous extract of the paper with correlation coefficients ranging from approximately 0.7 to 0.9 (4). Three pH levels, reflecting three levels of permanence, are specified. Extract pH as an indicator of life expectancy is not valid if a paper has been treated with an alkaline surface size or if an alkaline coating has been applied. 1.3 The following would be expected to contribute significantly to the life expectancy of manifold papers: the use of papers with controlled acidity, or of papers manufactured under neutral or alkaline conditions, especially papers with a calcium carbonate filler that absorbs acidic gases from the atmosphere and can neutralize acidic materials formed in the aging of paper. 1.4 This specification is based on fiber sources used in the production of paper that contains no more than 1% lignin, for papers used in archives, libraries, and other permanent records. However, under proper conditions, (see Appendix X1.5), paper containing more than 1% lignin may be employed for many other end uses in paper for records that are required to have a substantial life expectancy.

Standard Specification for Manifold Papers for Permanent Records

ASTM F598-00(2009) 测定无碳纸耐卷筒损伤能力的标准规范

The primary purpose of these tests is to obtain information from a statistical sampling of a lot or shipment of paper that will predict how well the whole lot will resist capsular damage from normal handling processes, either in manufacturing or in subsequent processing, storage, and use. Other aspects of significance are covered in 1.2.1.1 The test procedures of this practice are applicable to any carbonless paper product that employs a coating of micro-capsules bonded to one side of the paper wherein the active material within the capsules is a colorless reactant capable of generating color when the capsules are broken and the contained solution is simultaneously transferred to a reactive receptor surface capable of changing the chemical from a colorless to a colored condition. 1.2 The procedures are designed to demonstrate the extent of damage incurred by (1) controlling the rate of slippage of test units held in contact with each other under a calibrated weight and (2) by the controlled application of pressure to test units held stationary with respect to each other. 1.2.1 The first test procedure is designed to demonstrate the resistance to capsular damage related to plies slipping under pressure. 1.2.2 The second test procedure is designed to demonstrate the resistance to capsular damage related only to pressure, such as between plies within rolls, between sheets in a stack or due to nip effects in web processing, converting, or end-use equipment. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determining the Resistance of Carbonless Papers to Capsular Damage

ASTM D3208-00(2005) 永久记录用复写纸的标准规范

1.1 This specification covers manifold papers used in preparing typewritten copies of permanent or semipermanent records and documents. The original, or ribbon, copy usually leaves the organization in which it originated, so the carbon copy becomes the copy of record.1.2 It has been shown (, , , , ) that permanence is at least an approximate function of the pH of an aqueous extract of the paper with correlation coefficients ranging from approximately 0.7 to 0.9 (). Three pH levels, reflecting three levels of permanence, are specified. Extract pH as an indicator of life expectancy is not valid if a paper has been treated with an alkaline surface size or if an alkaline coating has been applied.1.3 The following would be expected to contribute significantly to the life expectancy of manifold papers: the use of papers with controlled acidity, or of papers manufactured under neutral or alkaline conditions, especially papers with a calcium carbonate filler that absorbs acidic gases from the atmosphere and can neutralize acidic materials formed in the aging of paper. 1.4 This specification is based on fiber sources used in the production of paper that contains no more than 1 % lignin, for papers used in archives, libraries, and other permanent records. However, under proper conditions, (see ), paper containing more than 1 % lignin may be employed for many other end uses in paper for records that are required to have a substantial life expectancy.1.5 As indicated in Appendices and , this specification may be used as a guide.

Standard Specification for Manifold Papers for Permanent Records

JIS S 3104:1999 面巾纸

Facial tissues

QB/T 2341-1997 纸餐盒

本标准规定了餐盒纸板和纸餐盒的技术规范。 本标准适用于以植物纤维为主要原料生产的纸餐盒，不适用于覆膜和淋膜的餐盒。

paper lunch box

ASTM F221-98 复写纸、油墨色带制品以及所产生的图案相关的标准术语

1.1 This set of definitions is intended for use by users of carbon paper, inked ribbons and images made therefrom, so that they will be able to better understand the terminology used by others in the field.

Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom

ASTM F767-98 化学无碳纸曝光后图象稳定性的标准试验方法

1.1 This test method covers the determination of the image stability of chemical carbonless paper by exposure to fluorescent light for a controlled time period. Stability to light is determined by visual comparison between exposed and unexposed samples. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Image Stability of Chemical Carbonless Paper to Light

ASTM F767-98(2002) 化学无碳纸曝光后图象稳定性的标准试验方法

This test method is a comparative test for determining the relative image stability of chemical carbonless paper samples. The light source used simulates that of an office environment, while accelerating image fade.1.1 This test method covers the determination of the image stability of chemical carbonless paper by exposure to fluorescent light for a controlled time period. Stability to light is determined by visual comparison between exposed and unexposed samples. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Image Stability of Chemical Carbonless Paper to Light

ASTM F221-98(2003) 复写纸、油墨色带制品以及所产生的图案相关的标准术语

1.1 This set of definitions is intended for use by users of carbon paper, inked ribbons and images made therefrom, so that they will be able to better understand the terminology used by others in the field.

Standard Terminology Relating to Carbon Paper and Inked Ribbon Products and Images Made Therefrom

QB/T 2294-1997 纸杯

本标准规定了食品包装用纸杯的技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于表面覆有石蜡或聚乙烯涂层的各类食品包装用纸杯。产品主要用作冷、热饮料和冰淇淋的容器。

paper cup

ASTM F129-97 复写纸和油墨色带(不包括织物带)上油墨沉积总量的标准规程

1.1 This practice covers the determination of the amount of ink deposit on carbon paper and inked ribbons, other than fabric type. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See specific precautionary statements in Note 2.

Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type

ASTM F129-97(2002) 复写纸和油墨色带(不包括织物带)上油墨沉积总量的标准规程

1.1 This practice covers the determination of the amount of ink deposit on carbon paper and inked ribbons, other than fabric type.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See specific warning statements in6.1 and 9.3.

Standard Practice for Amount of Ink Deposit on Carbon Paper and Inked Ribbons, Other Than Fabric Type

QB/T 2201-1996 钢纸管

本标准规定了钢纸管的技术规范。 本标准适用于供电器高、低压熔断器，避雷器及其他线路套管用钢纸管。

steel paper tube

CKS 647-1996 传真纸规范

Covers facsimile paper, in rolls, intended for use on facsimile printing machines of the thermal type, in order to capture transmitted images.

Facsimile paper

KS M 7044-1995 纸浆α.β.γ纤维素的测定

이 규격은 펄프의 알파, 베타 및 감마 셀룰로오스 시험 방법에 대하여 규정한다.

Testing method for alpha, beta and gamma cellulose in pulp

ISO 13542:1995 纸和纸板 卷筒纸纸芯内径的规格

Gives the internal diameters and tolerances for cores recommended for general use with reels of paper and board in international trade.

Paper and board - Specification for internal diameters of cores for reels

ASTM D5802-95(2001) 吸水纸制品吸附作用的标准试验方法(用重力原理测定吸附率和容量)

The absorptive characteristics, both rate and capacity, are of great importance in creped tissue papers made for use as absorbent sanitary tissue products, such as toweling and tissue. The absorptive characteristics, both rate and capacity, are of great importance in creped tissue or similar papers produced for incorporation into composite absorbent structures, such as disposable bed pads, and composite disposable absorbent structures containing an absorbent paper component such as hospital disposable bed pads and related products. This test method provides a standardized approach to the dynamic evaluation of both absorptive rate and absorptive capacity of materials such as those in 5.1 and 5.2. 1.1 This test method determines the liquid sorption of bibulous paper, paperboard, and paper products using gravimetric principles. 1.1.1 The procedure in this test method describes testing of absorbent materials such as those in 1.1. Similar testing may be done on composite absorbent products, incorporating cellulose and nonwoven fabrics, polymer films, or other similar materials for use such as absorbent pads, wipes, and so on with slight modification. This test method does not describe the application of this technique to textiles. 1.2 The standard test liquid is distilled water. 1.2.1 Other test liquids of interest may be used if desired, provided they are compatible with the liquid delivery system specified. 1.2.1.1 Examples of such test liquids include, but are not limited to, buffered solutions of distilled water, fruit or vegetable juices, milk, synthetic body liquids such as urine, and organic fluids such as salad oil, cooking oil, motor oil, and others. 1.3 The test liquid is delivered at an effective negative head pressure after initiating liquid flow (wicking). This allows the controlling sorptive properties to be demand wettability, the ability of the specimen to absorb through capillarity and surface wetting. 1.3.1 Using the equipment and principles described, absorption at other instrument configurations and head pressures, as well as desorption may be measured. 1.4 This test method measures both the rate and capacity of liquid sorption through demand wettability or wicking. Liquid capacity is defined as the point in the analysis where the sorption rate falls below 3.0 mg in 5 s. Agreed intermediate points are measured during the analysis to determine rate. 1.5 An analog or digital report of the sorptive behavior of the test specimen may be produced, if desired, to further characterize its sorptive behavior. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)