Y33 纸制品 标准查询与下载

ASTM D5802-95 吸水纸制品吸附作用的标准试验方法(用重力原理测定吸附率和容量)

1.1 This test method determines the liquid sorption of bibulous paper, paperboard, and paper products using gravimetric principles. 1.1.1 The procedure in this test method describes testing of absorbent materials such as those in 1.1. Similar testing may be done on composite absorbent products, incorporating cellulose and nonwoven fabrics, polymer films, or other similar materials for use such as absorbent pads, wipes, and so on with slight modification. This test method does not describe the application of this technique to textiles. 1.2 The standard test liquid is distilled water. 1.2.1 Other test liquids of interest may be used if desired, provided they are compatible with the liquid delivery system specified. 1.2.1.1 Examples of such test liquids include, but are not limited to, buffered solutions of distilled water, fruit or vegetable juices, milk, synthetic body liquids such as urine, and organic fluids such as salad oil, cooking oil, motor oil, and others. 1.3 The test liquid is delivered at an effective negative head pressure after initiating liquid flow (wicking). This allows the controlling sorptive properties to be demand wettability, the ability of the specimen to absorb through capillarity and surface wetting. 1.3.1 Using the equipment and principles described, absorption at other instrument configurations and head pressures, as well as desorption may be measured. 1.4 This test method measures both the rate and capacity of liquid sorption through demand wettability or wicking. Liquid capacity is defined as the point in the analysis where the sorption rate falls below 3.0 mg in 5 s. Agreed intermediate points are measured during the analysis to determine rate. 1.5 An analog or digital report of the sorptive behavior of the test specimen may be produced, if desired, to further characterize its sorptive behavior. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sorption of Bibulous Paper Products (Sorptive Rate and Capacity Using Gravimetric Principles)

KS M 7074-1995 抗燃处理的纸和纸板火焰抗性试验方法

이 규격은 방염 처리한 두께 1.6㎜ 이하의 종이 및 판지의 내화염성 시험 방법에 대하여

Testing method for flame resistance of treated paper and paperboard

ASTM F686-94(2006) 电动打字机打字时无碳复写纸产生的图像质量的评定的标准规程

This practice is used primarily to evaluate the image quality produced on an electric or electronic typewriter of a carbonless copy paper by comparison with a control carbonless copy paper with known performance qualities in a business form of a predetermined composition. This practice can be used for the selection of a carbonless copy paper where no control is available. This practice can be used to evaluate carbonless copy paper business forms by comparison to similar control form with known performance qualities. This practice can be used to determine which surface (Coated Back (CB) or Coated Front (CF)) of a carbonless copy paper in a business form that has an unsatisfactory performance is defective by replacing each surface one at a time with control CB or CF surfaces with known satisfactory performance. This practice can be used for production, quality control, and research and development.1.1 This practice covers a method for the visual evaluation of the image quality formed by a carbonless copy paper in a business form when imaged with an electric or electronic typewriter. Note 18212;Electric or electronic typewriters covered by this procedure have a full-character type element. Examples of such elements are type bar, ball, and daisy wheel.1.2 The evaluation is made by comparison of the sample carbonless copy to a control.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Evaluation of Image Quality Produced by Carbonless Copy Paper with an Electric or Electronic Typewriter

JIS S 3104:1992 化妆纸

Facial tissues

JIS S 3102:1992 窗户纸

この規格は，機械すきの障子紙(以下，障子紙という。)について規定する。

SHOJIGAMI

BS 1439:1992 单层湿绉纸巾规范

Minimum size and performance requirements for towelling designed primarily for the non-domestic market.

Specification for single-ply wet-creped paper towelling

CGSB 43.17-M91-CAN/CGSB-1991 瓦楞纸箱 代替43-GP-17M

Folding Paperboard Boxes

Folding Paperboard Boxes

KS M 7052-1990 瓦楞纸板粘合力试验方法

이 규격은 KS A 1502(외부 포장용 골판지)에 규정하는 골판지 골(A단 및 B단)의

Test Method for Adhesion of Corrugated Fibreboard

CKS 622-1990 电传打字机用卷筒纸规范

Covers 4 types, intended for use on page printers, with friction-feed mechanisms, of width 209 mm.

Paper rolls for teleprinters

KS M 7135-1990 溶解纸浆

이 규격은 아황산법 및 크라프트법에 의한 레이온급의 용해용 펄프에 대하여 규정한다.

Dissolving Pulp

KS M 7128-1989 防锈用金属除垢方法(铁德化学除垢法)

이 규격은 철강의 방청 전처리 중 화학적 청정방법 및 그 청정도의 확인 방법에 대하여 규정

Metal Cleaning for Rust Prevention(Chemical Cleaning of Steel Products)

WJ 1858-1989 OCP-101型光学清擦纸

OCP-101 optical cleaning paper

CKS 611-1987 铅印纸规范

Covers physical properties of 2 types of letterpress printing paper supplied in the form of either sheets or reels.

Paper for letterpress printing

CKS 67-1987 纸袋的规范

Covers open-mouthed, gusseted, rectangular-bottomed grocery bags made from 3 classes of paper. Lays down dimensional, physical and constructional requirements.

Paper bags

QB/T 3502-1999 棉条筒钢纸板

本标准规定了棉条筒钢纸板的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存的要求。 本标准适用于原纸经氯化锌胶化而成的钢纸板，供纺织行业做棉条筒用的材料。

Vulanized fiber for the cotton yarn container

ANSI/INCITS 152-1987 非碳化单层加法机纸卷规范

This standard provides the following specifications for adding machine paper rolls: terminology; roll widths; roll length; paper substance and quality, thickness, finish, color, brightness, opacity, tearing and bursting strength; diameter of rolls; winding and cutting, core materials; diameter of core and spindle hole; roll end sealing; and quantity packaging and cartoning.

Noncarbonized, Single-Ply, Adding Machine Paper Rolls, Specifications for

ASTM F415-87(2010) 复写纸卷曲度的标准试验方法

This test method is intended to measure the amount of curl of a carbon paper sheet relative to the flat surface supporting the sample. The test is useful as a quality control method and for predicting field performance.1.1 This test method covers the determination of curl of carbon paper. 1.2 This test method may be used for specification acceptance, manufacturing control, development, and research. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Curl in Carbon Paper

QB/T 3508-1999 滤咀棒纸

本标准规定了滤嘴棒纸的产品分类、技术要求、试验方法、检验规则和包装、标志、运输、贮存的要求。 本标准适用于机器卷制香烟的滤嘴棒用纸。

Filtertip-paper

ASTM F509-86(2009) 销孔用一次性碳化纸的试验的标准实施规程

This practice is to be used to provide a visual means of determining the existence of pinholes by penetration of a dye solution through the pinhole into a white receptor paper. The practice is suitable for manufacturing control and will give close correlation with the end product. This practice is suitable for comparative service evaluation and development. The initial appearance will change with time due to continued migration of dye solution into the receptor paper and the size of the colored areas will not represent the actual size of the pinholes through which the solution was exuded.1.1 This practice covers the determination of the existence of pinholes in one-time carbonizing tissues. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Testing One-Time Carbonizing Tissue for Pinholes

ASTM F854-83(2008) 复写纸清洁度的标准试验方法

This test method can be used in new applications evaluations, product development, and specification acceptance procedures.1.1 This test method describes a typewriter test that compares the cleanliness properties of carbon papers (one-time or multiple use) and is based on resistance to feed roll marking the smear of carbon images. 1.2 This test method also describes how to compare the cleanliness properties of the backs of carbon papers. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Cleanliness of Carbon Paper