Y45 皮革加工与制品综合 标准查询与下载

BS EN ISO 11644:2009 皮革.精饰粘附性试验(ISO 1644-2009)

This International Standard specifies a method for measuring the adhesion of the finish to leather or the adhesion between two adjacent layers of the finish. The method is valid for all finished leathers with a smooth surface that can be bonded to an adherent-plate without the adhesive penetrating into the finish. Preliminary experiments might be necessary to determine whether these conditions are met. This test method is valid for finished leathers with a finish-coat thickness of at least 15 μm.

Leather - Test for adhesion of finish(ISO 1644:2009)

DIN EN ISO 5398-2:2009 皮革.氧化铬含量的化学法测定.第2部分:通过比色测定法进行定量(ISO 5398-2:2009),DIN EN ISO 5398-2:2009-06的英文版本

This part of ISO 5398 describes the determination of chrome by colorimetric means. It is applicable to leathers which are expected to have chromic oxide contents in excess of 0,05 %. This is an analysis for total chromium in leather; it is not compound specific or specific to its oxidation state.

Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination (ISO 5398-2:2009); English version of DIN EN ISO 5398-2:2009-06

ISO 11644:2009 皮革.涂层粘着牢度试验

Leather - Test for adhesion of finish

ISO 11643:2009 皮革.色牢度试验.小样品对溶剂的色牢度

Leather - Tests for colour fastness - Colour fastness of small samples to solvents

ISO 5398-2:2009 皮革.氧化铬含量的化学测定.第2部分:用比色测定数量

Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination

ASTM F2765-09 人造草皮纤维中总铅含量的标准规范

1.1 This specification applies to the maximum content of lead in fibers used in synthetic turf. 1.1.1 This specification outlines a test method for sample preparation and a test method for analyzing the total lead content in synthetic turf fibers. 1.1.2 This specification outlines guidelines for reporting total lead content in synthetic turf fibers. 1.2 This specification applies only to synthetic turf fibers manufactured after Sept. 1, 2009. Note 18212;It is the goal of the industry to reduce lead content to 100 mg/kg (ppm) by Sept. 1, 2011. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Total Lead Content in Synthetic Turf Fibers

SN/T 2191-2008 进出口皮革皮毛产品安全技术规程

本标准规定了进出口皮革皮毛产品的基本安全技术要求、检测方法、检验规则及检验结果的判定准则。 本标准适用于日用进出口皮革及皮毛产品。 本标准不适用于特种行业用皮革皮毛产品。

Safety technical code for import and export leather and fur products

SN/T 2193-2008 进出境生皮和鞣制材料皮检验检疫规程

本标准规定了进出境材料皮的抽样和检验检疫方法。 本标准适用于各种动物的生皮和鞣制材料皮的进出境检验检疫。

Protocol of inspection and quarantine for entry-exit raw piece hide and tanned piece leather

DIN EN ISO 17226-1:2008 皮革.甲醛含量的化学测定.第1部分:高效液相色谱法

This part of ISO 17226 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and not sensitive to coloured extracts. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under standard conditions.

Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography (ISO 17226-1:2008); German version EN ISO 17226-1:2008

DIN EN ISO 17226-2:2008 皮革.甲醛含量的化学测定.第2部分:比色分析法

This part of ISO 17226 specifies a method for the determination of free and released formaldehyde in leathers. This method is based on colorimetric analysis. The formaldehyde content is taken to be the quantity of free-formaldehyde and formaldehyde extracted through hydrolysis contained in a water extract from the leather under standard conditions. This process is not absolutely selective for formaldehyde. Other compounds such as extracted dyes could interfere at 412 nm.

Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis (ISO 17226-2:2008); German version EN ISO 17226-2:2008

BS EN ISO 4044:2008 皮革.化学试验.化学试样的制备

This International Standard specifies a method for the preparation of a test sample of leather for chemical analysis. This method is applicable to all types of leather.

Leather - Chemical tests - Preparation of chemical test samples

BS EN ISO 4045:2008 皮革.化学试验.pH值的测定

This International Standard specifies a method for determining the pH value and the difference figure of an aqueous leather extract. It is applicable to all types of leather.

Leather - Chemical tests - Determination of pH

ISO 17226-2:2008 皮革.甲醛含量的化学测定.第2部分:使用比色分析法

Leather - Chemical determination of formaldehyde content - Part 2: Method using colorimetric analysis

ISO 17226-1:2008 皮革.甲醛含量的化学测定.第1部分:使用高效液相色谱法

Leather - Chemical determination of formaldehyde content - Part 1: Method using high performance liquid chromatography

KS M ISO 3377-1:2008 皮革.物理和机械试验.撕破力的测定.第1部分:单边撕裂

이 규격은 단일 가장자리 인열을 이용해서 가죽의 인열 강도를 측정하기 위한 방법에 대하여

Leather-Physical and mechanical tests-Determination of tear load-Part 1:Single edge tear

KS M ISO 5402:2008 皮革.物理和机械试验.挠曲计测定抗弯性

이 규격은 가죽 완성품에 대한 물성 측정을 위해 습식 또는 건식 내굴곡성을 측정하기 위한

Leather-Physical and mechanical tests-Determination of flex resistance by flexometer method

KS M ISO 3377-2:2008 皮革.物理和机械试验.撕破力的测定.第2部分:双边撕裂

이 규격은 이중 가장자리 인열을 이용해서 가죽의 인열 강도를 측정하기 위한 방법에 대하여

Leather－Physical and mechanical tests－Determination of tear load－Part 2：Double edge tear

QB/T 2973-2008 毛皮.物理和机械试验阻燃性能的测定

本标准规定了毛皮阻燃性能的测定方法。 本标准适用于有阻燃性能要求的毛皮。

Fur.Physical and mechanical tests.Determination of resistance to flame

KS M ISO 17235:2008 皮革.物理和机械试验.软化度测定

이 표준은 가죽의 유연성을 측정하는 비파괴 방법에 대하여 규정한다. 이 시험방법은 딱딱하지

Leather-Physical and mchanical tests-Determination of softness

KS M ISO 17227:2008 皮革.物理和机械试验.皮革耐干热性的测定

이 표준은 전처리한 가죽의 건식 내열성을 측정하기 위한 방법에 대하여 규정한다. 이 시험방

Leather－Physical and mchanical tests－Determination of dry heat resistance of leather