Y45 皮革加工与制品综合 标准查询与下载
共找到 693 条与 皮革加工与制品综合 相关的标准，共 47 页
Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer)
- ICS
- 59.140.30;61.060
- CCS
- Y45
- 发布
- 2011-12
- 实施
本标准规定了进出口铬鞣(蓝)湿革的抽样、检验及结果的判定。 本标准适用于进出口铬鞣(蓝)湿革的检验。
Rules for the inspection and quarantine protocol of wet bluechrome leather for import and export
- ICS
- CCS
- Y45
- 发布
- 2011-09-09
- 实施
- 2012-04-01
Leather - Terminology - Key definitions for the leather trade.
- ICS
- 01.040.59;59.140.99
- CCS
- Y45
- 发布
- 2011-08-01
- 实施
- 2011-08-06
This European Standard specifies the key terms and definitions used for the leather trade. Defined parameters in this standard need to be assessed using standard test methods specific for leather.
Leather - Terminology - Key definitions for the leather trade; German version EN 15987:2011
- ICS
- 01.040.59;59.140.99
- CCS
- Y45
- 发布
- 2011-08
- 实施
This European Standard specifies the key terms and definitions used for the leather trade. Defined parameters in this standard need to be assessed using standard test methods specific for leather. NOTE See Bibliography for leather test method standards.
Leather. Terminology. Key definitions for the leather trade
- ICS
- 01.040.59;59.140.99
- CCS
- Y45
- 发布
- 2011-06-30
- 实施
- 2011-06-30
本标准规定了制革用树脂材料中甲醛含量的测定方法。 本标准适用于皮革工业中的树脂材料。
Leather chemical.Determination of formaldehyde in resins
- ICS
- 59.140.10
- CCS
- Y45
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了制革用颜料膏的耐热稳定性测试方法。 本标准适用于制革用颜料膏。
Pigment for leather coating.Test method for the resistance to heat
- ICS
- 59.140.10
- CCS
- Y45
- 发布
- 2011-06-15
- 实施
- 2011-10-01
Leather - Determination of abrasion resistance - Part 2: Martindale ball plate method
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-06
- 实施
本标准规定了进出口盐湿猪皮的抽样、检疫、检验及结果判定、检疫处理与监管的程序和内容。 本标准适用于对进出口盐湿猪皮的检疫、检验、检疫处理与监管。
Rules for the inspection and quarantine protocol of wet saltedpig skin for import and export
- ICS
- CCS
- Y45
- 发布
- 2011-05-31
- 实施
- 2011-12-01
This part of ISO 17226 specifies a method for determining the emission of formaldehyde from leathers. This method is based on high performance liquid chromatography (HPLC). It is selective and also allows the emission of other low molecular aldehydes and ketones to be observed. This part of ISO 17226 deals with the release of formaldehyde to the gas phase. Therefore, the obtained results are not comparable with the results of methods described in ISO 17726-1 and ISO 17226-2 which are based on extraction with liquid water.
Leather - Chemical determination of formaldehyde content - Part 3: Determination of formaldehyde emissions from leather
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-05-15
- 实施
Leather - Identification of leather with microscopy (ISO/DIS 171317:2011); German version prEN ISO 17131:2011
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-05-01
- 实施
Comprehensive energy consumption quota per unit product of cow leather
- ICS
- 59.140.99
- CCS
- Y45
- 发布
- 2011-04-28
- 实施
- 2011-06-01
Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2 : determination of 4-aminoazobenzene.
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-04-01
- 实施
- 2011-04-30
Leather - Chemical tests - Determination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography (ISO 13365:2011); German version EN ISO 13365:2011
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-04
- 实施
This part of ISO 17234 is supplementary to ISO 17234-1 and describes a special procedure to detect the use of certain azo colorants in commodities, which can release 4-aminoazobenzene. The procedure also detects 4-aminoazobenzene (Solvent Yellow 1) which is already available as free amine in commodities without reducing pretreatment. Azo colorants that are able to form 4-aminoazobenzene generate, under the conditions of ISO 17234-1, the amines aniline and 1,4-phenylenediamine. The presence of these 4-aminoazobenzene colorants cannot be reliably ascertained without additional information (e.g. the chemical structure of the colorant used) or without a special procedure. The use of certain azo colorants, which may release, by reductive cleavage of their azo group(s), one or more of the other aromatic amines listed in Annex XVII of Regulation (EC) No. 1907/2006 of the European Parliament and of the Council on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), except 4-aminoazobenzene, cannot be determined quantitatively with this method.
Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 2: Determination of 4-aminoazobenzene
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-03-15
- 实施
- 2011-03-15
本标准规定了用气相色谱－质谱法测定皮革中 N,N－二甲基甲酰胺的方法。本标准适用于以 N,N－二甲基甲酰胺为主要溶剂制成的皮革中N,N－二甲基甲酰胺的测定。
Determination of N,N-Dimethylformamide in Leather Gas Chromatography-Mass Spectrometry
- ICS
- 59.140.01
- CCS
- Y45
- 发布
- 2011-03-07
- 实施
- 2011-04-07
Leather - Chemical tests for the determination of certain azo colorants in dyed leathers - Part 1 : determination of certain aromatic amines derived from azo colorants.
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011-03-01
- 实施
- 2011-03-23
The procedure is intended, primarily to evaluate the ability of a leather specimen to withstand fixed, and rather strenuous, laundering conditions. This test is not intended as a recommended washing procedure, neither household nor commercial. Although this test concerns itself with colorfastness and transfer of color during washing, the washed leather specimens are available also for comparing other properties (that is, tensile strength, area change, change in outline, etc.) with those of unwashed samples. 1.1 This test method covers the determination of the colorfastness of colored leathers, with or without a surface coating. The leathers to be tested are of the type normally expected to withstand frequent laundering. This test method also covers the simultaneous staining of adjacent textile materials when the leather specimens are washed. This test method does not apply to wet blue. Two procedures are covered depending on the apparatus used: 1.1.1 Procedure A, using the Launder-Ometer, and 1.1.2 Procedure B, using an alternative washing machine. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values stated in parentheses are provided for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2011
- 实施
Leather - Tests for colour fastness - Colour fastness to cycles of to-and-fro rubbing (ISO/DIS 11640:2010); German version prEN ISO 11640:2010
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2010-11-01
- 实施
Leather - Tests for colour fastness - Colour fastness to perspiration (ISO/DIS 11641:2010); German version prEN ISO 11641:2010
- ICS
- 59.140.30
- CCS
- Y45
- 发布
- 2010-11-01
- 实施
