Y54 办公用品及办公机具 标准查询与下载

KS G 9140-2010 普通工作用粘合剂

이 표준은 가정, 학교 등에서 일반적으로 사용되는 접착제(이하 접착제라 한다.)에 대하여

Adhesives for general works

KS G 2501-2009 封袋

이 표준은 종이로 만든 홑겹 및 겹봉투(이하 봉투라 한다.)에 대하여 규정한다.비고

Envelopes and pockets

SANS 24735:2009 信息技术．办公设备．数字复印能力的测量方法

Provides a method for measuring digital copying productivity of digital copying devices and multifunctional devices with various copying modes. Allows comparison of the throughput copying rates for a machine operated in various available operating modes

Information technology - Office equipment - Method for measuring digital copying productivity

SANS 24734:2009 信息技术．办公设备．数字打印能力的测量方法

Provides a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. Applies to digital printing devices, including single function printing and multi-function devices, regardless of

Information technology - Office equipment - Method for measuring digital printing productivity

DIN ISO/IEC 28360:2009 信息技术.办公设备.电子设备化学物排放率的测定(ISO/IEC 28360-2007+勘误表1-2008)

This Standard describes methods to determine chemical emission rates of electronic equipment using consumables such as printers and electronic equipment not using consumables such as monitors and PC's. The emission rates determined with this method may be used to compare equipment in the same class. Predictions of "real indoor" concentrations from the determined emission rates are not part of this Standard

Information technology - Office equipment - Determination of chemical emission rates from electronic equipment (ISO/IEC 28360:2007 + Cor. 1:2008)

KS G 2303-2009 原子印台

이 표준은 스탬프대에 사용하는 스탬프 잉크(이하 잉크라 한다.)에 대하여 규정한다.

Stamp pad ink

DIN 33871-2:2009 信息技术 办公机械 喷墨打印机用喷墨头和墨盒 第2部分:兼容墨盒（4色系统）要求及其显著特点

Information technology - Office machines, inkjet print heads and inkjet tanks for inkjet printers - Part 2: Requirements on compatible ink cartridges (4-colour system) and their characteristic features

KS G 2402-2009 办公用文件夹(夹板)

이 표준은 사무용 파일 중 서류 등을 철하는 기구를 가진 플랫 파일(이하 파일이라 한다.)

Office files(flat)

ISO/IEC 24735:2009 信息技术.办公设备.数字复印能力的测量方法

This International Standard specifies a method for measuring “productivity” of digital copying devices and multifunctional devices with various copying modes. The International Standard is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder and collating function. The International Standard is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. The International Standard allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc) and various available digital image processing configurations. This International Standard includes test files, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This International Standard is not intended to be used for devices which are not able to copy on a media size of A4/8.5"x11", devices that do not have an ADF (automatic document feeder), or devices which are not able to collate multiple copies of original prints from a test set. This International Standard is not intended to replace manufacturer's rated speeds.

Information technology - Office equipment - Method for measuring digital copying productivity

ISO/IEC 24734:2009 信息技术.办公设备.数字印刷能力的测量方法

This International Standard specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. This International Standard is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. This International Standard includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. This International Standard is not intended to be used for devices which are not able to print on a media size of A4/8.5”x11” or for devices, which are not able to collate multiple copies of a print. This International Standard is not intended to replace manufacturer's rated speeds. The productivity of a digital printing device depends on factors other than the printing device itself. These include, but are not limited to, computer manufacturer and model, central processor type and speed, RAM and hard disk memory capacity and speed, software driver, version of the application being used, operating system, and the type and speed of the communication path from computer to printing device, etc. Because of this, in order to make useful and accurate direct comparisons of printing productivity with this International Standard, the same computer system hardware and software shall be used for measuring the printing devices if for the purpose of being directly compared one to another. For every printing productivity measurement, the basic specifications of the computer hardware and software shall be included with the results of the printing productivity measurement. NOTE Important note for the use of this International Standard. There are other factors that influence the number of prints that a person can make on a printing device within a defined time period. These factors include typical job portfolio that is printed on a particular printing device, reliability of the system, downtime due to a service call, ease-of-use, (un)load paper during printing, routine maintenance, interaction with other users of the printing device and the network, etc. Such productivity items are not taken into account within the scope or methods of this International Standard.

Information technology - Office equipment - Method for measuring digital printing productivity

JIS S 6041 AMD 1:2009 纸打印器(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS S 6041:1982 is partially replaced with this Amend- ment.

Paper Punches (Amendment 1)

ISO 27668-1:2009 中性圆珠笔和笔芯.第1部分:一般用途

This part of ISO 27668 establishes minimum quality requirements for gel ink ball pens (refillable and nonrefillable) and refills for general use. Additional requirements for gel ink ball pens for documentary use are given in ISO 27668-2.

Gel ink ball pens and refills - Part 1: General use

ISO 27668-2:2009 中性圆珠笔和笔芯.第2部分:文件使用(DOC)

This part of ISO 27668 establishes minimum quality requirements for gel ink ball pens (refillable or non-refillable) and refills for documentary use. Basic requirements for gel ink ball pens for general use are given in ISO 27668-1.

Gel ink ball pens and refills - Part 2: Documentary use (DOC)

ASTM F875-09 办公室复印机大范围浓度和底色评定用测试方法

The copy image quality is affected by many factors; including the copier, supplies, and environmental conditions. The density and background image quality is particularly significant relative to aesthetic appearance, the visual impression of blackness, and the ability to distinguish information from background. The test target may also be used to evaluate the copier or supplies. 1.1 This test method covers the description and method of use for a density and background test target for office copier image evaluation. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 8.

Standard Test Method for Evaluation of Large Area Density and Background on Office Copiers

BS 6396:2008+A1:2015 办公家具和教育用家具中的电气系统.规范

Electrical systems in office furniture and educational furniture – Specification

BS 6396:2008 办公家具和教育用家具中的电气系统.规范

This British Standard specifies requirements for the safe provision and assembly of electrical power, data and telecommunications distribution systems in office furniture, educational furniture and office screens. Requirements are specified for furniture for general use and for furniture for use with specific equipment, parts of which may be built in during manufacture. Appropriate tests are described for the installed power distribution system in the furniture. The standard applies to single‑phase electrical power distribution systems operating at rated voltages up to 250 V a.c. that are connected to the fixed wiring of the permanent installation of the building by a 13 A fused plug and socket outlet arrangement conforming to BS 1363. The standard makes provision for the routing of cables through the furniture. This standard does not apply to electrical appliances used with or within an article of office furniture or educational furniture, for which appropriate standards are available. The standard does not apply to power distribution systems that are permanently connected to the building installation. The standard also does not apply to special purpose workstations in laboratories or workshops.

Electrical systems in office furniture and educational furniture – Specification

SANS 24711:2008 彩色喷墨打印机及包含打印机组件的多功能设备的墨盒打印量测定方法

Limits to the evaluation of ink cartridge page yield for ink-containing cartridges for colour inkjet printers. Applies to printer component of any multifunctional device that has a digital input printing path, including multifunction devices that contai

Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components

ISO/IEC 10779:2008 信息技术.年长者和残疾人士用办公设备易接近性指南

This International Standard specifies accessibility guidelines to be considered when planning, developing and designing electrophotographic copying machines, page printers and multi-function devices. These guidelines are intended to improve accessibility required when primarily older persons, persons with disabilities and persons with temporary disabilities (hereafter referred to as older persons and persons with disabilities) use office equipment.

Information technology - Office equipment accessibility guidelines for elderly persons and persons with disabilities

JIS S 6050 AMD 1:2008 塑料橡皮擦(修改件1)

This translation has been made based on the Amendment to the origi- nal Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee as the result of proposal for revision of Japanese Industrial Standard with the draft being attached, based on the provi- sion of Article 12 Clause 1 of the Industrial Standardization Law ap- plicable to the case of revision by the provision of Article 14. Consequently, JIS S 6050:2002 is partially replaced with this Amend- ment.

Plastics erasers (Amendment 1)

QB/T 2960-2008 彩泥

本标准规定了彩泥（俗称“橡皮泥”）的产品分类、要求、试验就去、检验规则和标志、包装、运输、贮存。 本标准适用于儿童劳作、学校教学、模型设计、艺术造型等用途的彩泥。

Modeling clay