Y54 办公用品及办公机具 标准查询与下载
共找到 440 条与 办公用品及办公机具 相关的标准，共 30 页
This International Standard is intended to facilitate the users in selecting facsimile equipment which meets their requirements. This International Standard specifies the minimum information that shall be included in the specification sheets of facsimile equipment so that users may compare the characteristics of different machines. This International Standard applies to facsimile equipment that could be operated in an office environment. Facsimile equipment requiring specially equipped rooms or specially instructed operators are not considered in this International Standard. Facsimile equipment is assigned to group 3 and 4 depending on technical capabilities and is classified according to paper handling, scanning, recording and resolution.
Information technology - Office machines - Minimum information to be included in specification sheets; facsimile equipment
- ICS
- 33.050.30
- CCS
- Y54
- 发布
- 2000-07
- 实施
Pencils, coloured pencils and leads for them
- ICS
- 97.180
- CCS
- Y54
- 发布
- 2000-05-20
- 实施
This test method should be used to evaluate several performance qualities of multistrike film ribbons on a comparative basis. This test method is suitable for comparative service evaluation, research, and development. It may also be used for manufacturing control but only on a limited basis, due to time span required for some of the procedures. This procedure consists of several tests that are used to evaluate different characteristics of multistrike ribbons. The user can choose any one of these, a series of tests, or all tests depending on his needs and interests.1.1 This test method covers information and techniques for evaluating several performance qualities of multistrike film typewriter/printer ribbons on a comparative basis for general office use. It is not intended for specialized applications such as optical character recognition. 1.2 This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note 10 for a specific cautionary statement.
Standard Test Method for Comparing Multistrike Film Ribbons
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
This test method should be used to evaluate several performance qualities of multistrike film ribbons on a comparative basis. This test method is suitable for comparative service evaluation, research, and development. It may also be used for manufacturing control but only on a limited basis, due to time span required for some of the procedures. This procedure consists of several tests that are used to evaluate different characteristics of multistrike ribbons. The user can choose any one of these, a series of tests, or all tests depending on his needs and interests.1.1 This test method covers information and techniques for evaluating several performance qualities of multistrike film typewriter/printer ribbons on a comparative basis for general office use. It is not intended for specialized applications such as optical character recognition. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. See Note 10 for a specific cautionary statement.
Standard Test Method for Comparing Multistrike Film Ribbons
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
1.1 This practice provides information and techniques for evaluating several performance qualities of one-time noncorrectable typewriter ribbons on a comparative basis for general office use, but not for specialized applications such as optical character recognition (OCR), data terminals, etc. 1.2 This standard does not purport to address the safety problems associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
This practice can be used to evaluate various properties of one-time noncorrectable ribbons on a comparative basis. These properties include write, flake-off, heat stability, bleed-through, offset master erasability, reproduction, unintentional transfer, and general quality, that is, splices, skips, and holes in coating, offset to back of ribbon, and transfer to fingers. This practice is suitable for comparative service evaluation and research and development. This practice may not be practical for manufacturing control because of time required to run some of the tests. 1.1 This practice provides information and techniques for evaluating several performance qualities of one-time noncorrectable typewriter ribbons on a comparative basis for general office use, but not for specialized applications such as optical character recognition (OCR), data terminals, etc. 1.2 This standard does not purport to address the safety problems associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Comparing One-Time Noncorrectable Typewriter Ribbons
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 3: Visual Display Requirements First Edition
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
Information technology Programming languages COBOL ISO/IEC 1989:2002
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 2: Guidance on Task Requirements ISO 9241-2:1992
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
Information Technology - Programming Languages - Fortran - Part 2
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 1: General Introduction First Edition
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
1.1 This practice covers standardized procedures utilizing the electric or electronic typewriter as an imaging device for measuring the performance properties of carbonless paper, carbon paper, inked ribbon, and similar image producing products. Note-Electric and electronic typewriters covered by this practice have a full-character type element. Examples of such elements are type bar, ball, thimble, and daisy wheel. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 8: Requirements for Displayed Colours ISO 9241-8:1997
Exigences Ergonomiques Pour Travail De Bureau Avec Terminaux A Ecrans De Visualisation (TEV) - Partie 8: Exigences Relatives Aux Couleurs Affichees Premiere Edition; ISO 9241-8: 1997
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 9: Requirements for Non-Keyboard Input Devices ISO 9241-9:2000
Exigences Ergonomiques Pour Travail De Bureau Avec Terminaux A Ecrans De Visualisation (TEV) - Partie 9: Exigences Relatives Aux Dispositifs D碋ntree Autres Que Les Claviers Premiere Edition; ISO 9241-9: 2000
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
Information technology - Office machines - Minimum information to be included in specification sheets - Facsimile equipment
- ICS
- 33.050.30
- CCS
- Y54
- 发布
- 2000
- 实施
This practice is intended to provide a means of rapid evaluation of comparative image quality relative to carbon paper, carbonless paper, inked ribbons, and similar image-producing products.1.1 This practice covers standardized procedures utilizing the electric or electronic typewriter as an imaging device for measuring the performance properties of carbonless paper, carbon paper, inked ribbon, and similar image producing products. Note 18212;Electric and electronic typewriters covered by this practice have a full-character type element. Examples of such elements are type bar, ball, thimble, and daisy wheel. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
This practice is intended to provide a means of rapid evaluation of comparative image quality relative to carbon paper, carbonless paper, inked ribbons, and similar image-producing products.1.1 This practice covers standardized procedures utilizing the electric or electronic typewriter as an imaging device for measuring the performance properties of carbonless paper, carbon paper, inked ribbon, and similar image producing products. Note-Electric and electronic typewriters covered by this practice have a full-character type element. Examples of such elements are type bar, ball, thimble, and daisy wheel. 1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Use of the Electric and Electronic Typewriter as a Test Instrument
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
Ergonomic Requirements for Office Work with Visual Display Terminals (VDTs) - Part 5: Workstation Layout and Postural Requirements ISO 9241-5:1998
Exigences Ergonomiques Pour Travail De Bureau Avec Terminaux A Ecrans De Visualisation (TEV) - Partie 5: Amenagement Du Poste De Travail Et Exigences Relatives Aux Postures Premiere Edition; ISO 9241-5: 1998
- ICS
- CCS
- Y54
- 发布
- 2000
- 实施
This test method may be used to evaluate several performance characteristics of typewriter and printer lift-off correction media on a comparative basis. This test method is suitable for comparative service evaluation and research and development. This test method is suitable for manufacturing control on a limited basis, due to the length of time required for some tests. 1.1 This test method provides information and test procedures for evaluating several performance qualities of typewriter or printer lift-off correction tapes and tabs on a comparative basis for general office use. 1.2 This standard does not purport to address the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Comparing Lift-Off Correction Media
- ICS
- 35.260 (Office machines)
- CCS
- Y54
- 发布
- 2000
- 实施
