Y73 日用五金制品 标准查询与下载

KS G 3119-2010 安全剃须刀

이 표준은 인체의 피부 면도에 사용하는 안전 면도기(이하 면도기라 한다.)를 규정한다.

Safety razor

BS PD CEN/TR 16015:2010 家具五金件.锁紧机构术语

This Technical Report specifies terms for all types of locking mechanisms for all fields of application. With the aid of figures it establishes different types, with the aim of facilitating comprehension of the technical language.

Hardware for furniture — Terms for locking mechanisms

ANSI/BHMA A156.9-2010 厨柜五金的美国国家标准

This Standard contains requirements for cabinet hardware and includes hinges, knobs, pulls, catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. Included are performance tests covering operational, cyclical, strength, and finish criteria.

American National Standard for Cabinet Hardware

DIN EN 15706:2009 家具五金.滑动门和滚动前门的强度和耐久性

This European Standard EN 15706 specifies test methods and requirements for the strength and durability of all types of slide fittings for all types of sliding doors and roll fronts sliding horizontally and vertically and their components for all fields of application. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in Clause 8, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the fittings and the parts used for the attachment. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the fittings tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. With the exception of the corrosion test in Clause 8, ageing and influences of heat and humidity are not included. Annex A (normative): Product information system. Annex B (normative): Test parameters.

Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts; English version of DIN EN 15706:2009-08

KS G 3701-2009 铝合金梯子及活梯

이 표준은 주로 일반적으로 사용되는 알루미늄 합금제로 높이 3.5 m 이하의 발붙임 사다리

Aluminium alloy ladder and stepladder

KS G 3209-2009 伐木用刀

이 표준은 목재를 벌목하는 데 사용하는 벌목용 칼(이하 칼이라 한다.)에 대하여 규정한다.

Lumber knife

KS G 3102-2009 拉链

이 표준은 의복 재료, 자루물 등에 사용되는 일반용 슬라이드 파스너(이하 파스너라 한다.)

Slide fasteners

BS EN 15706:2009 家具用五金.拉门和铰链门滑动配件的强度和耐久性

This European Standard EN 15706 specifies test methods and requirements for the strength and durability of all types of slide fittings for all types of sliding doors and roll fronts sliding horizontally and vertically and their components for all fields of application. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in Clause 8, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the fittings and the parts used for the attachment. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the fittings tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. With the exception of the corrosion test in Clause 8, ageing and influences of heat and humidity are not included. Annex A (normative): Product information system. Annex B (normative): Test parameters.

Hardware for furniture - Strength and durability of slide fittings for sliding doors and roll fronts

ASTM F883-09 挂锁的标准性能规范

1.1 This specification covers environmental, functional, operational, and security requirements for padlocks. Included are function descriptions, cycle tests, operational tests, environmental tests, forcing tests, and surreptitious entry tests. No effort has been made to include criteria for specially made padlocks used by the Department of Defense or others in highly sensitive locations. 1.2 This specification describes and grades various levels of performance to provide users of the specification with criteria upon which to select suitable padlocks. 1.3 Tests described are laboratory tests and although they simulate field conditions as to attacks or the environment, they do not duplicate these conditions. Tests described are repeatable in the laboratory. 1.4 Some users of this specification may wish to use padlocks that have special attributes not related to security. These are found in 4.3. 1.5 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.6 The following precautionary caveat pertains only to the test method portions, Sections 8-11, of this specification: This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Padlocks

BS PD CEN/TR 15709:2008 家具五金件.滑门和卷门滑动配件的术语

This European Technical Report specifies terms for all types of slide fittings for sliding doors and roll fronts for all fields of application. With the aid of figures it establishes different types, with the aim of facilitating comprehension of the technical language.

Hardware for furniture — Terms for slide fittings for sliding doors and roll fronts

SANS 1510-1:2008 闭门器.第1部分:单动作升降门闭门器

Covers the mechanical performance of door closers of 6 sizes (with or without backcheck or delayed action), including their operating arms and arm linkages.The closers are intended for face fixing either on the door or on the transom.Does not cover requi

Door closers Part 1: Single-action overhead door closers

SANS 4:2008 门锁、门闩以及门用其他家具(家用型)

Provides definitions that clarify the relevant terms and descriptions used, and lays down requirements for the type, construction, finish, performance, minimum security, and certain essential dimensions of lever- and pin-tumbler mechanism locks and latch

Locks, latches, and associated furniture for doors (Domestic Type)

SANS 182-2:2008 拉链

Covers material and constructional requirements for uninsulated, stranded hard-drawn aluminium conductors for overhead transmission lines.

Conductors for overhead electrical transmission lines Part 2: Stranded aluminium conductors

ANSI/UL 14Ba-2008 标准水平安装锡复合防火门用滑动五金器具标准

Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors

ANSI/UL 14Ca-2008 标准白铁皮包覆防火单门和双门用转动小五金的标准

Standard foro Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs

BS 10621:2007+A2:2012 防盗双模门锁组件

Thief resistant dual-mode lock assembly

BS 10621:2007 双重防盗锁组件

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions and cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209:2003 field of door application grades A, B, C, D, E, F or J that, under normal conditions, can be unlocked from the inside without the use of a key, thereby allowing keyless egress; b) can be changed to a secure (no egress) mode by a secondary positive locking action; c) is used in doors, window doors and entrance doors in buildings. This standard covers only those thief resistant lock assemblies that are intended for use in dwellings where there is an alternative escape route. It does not cover thief resistant lock assemblies that provide keyless egress at all times since these are covered by BS 8621, nor does it cover thief resistant lock assemblies that require the use of a removable key for egress since these are covered by BS 3621. NOTE It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with Clause 9.

Thief resistant dual-mode lock assembly

BS 10621:2007+A1:2009 防盗双模门锁组件

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions and cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209:2003 field of door application grades A, B, C, D, E, F or J that, under normal conditions, can be unlocked from the inside without the use of a key, thereby allowing keyless egress; b) can be changed to a secure (no egress) mode by a secondary positive locking action; c) is used in doors, window doors and entrance doors in buildings. This standard covers only those thief resistant lock assemblies that are intended for use in dwellings where there is an alternative escape route. It does not cover thief resistant lock assemblies that provide keyless egress at all times since these are covered by BS 8621, nor does it cover thief resistant lock assemblies that require the use of a removable key for egress since these are covered by BS 3621. NOTE It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with Cla.use 9.

Thief resistant dual-mode lock assembly

BS 8621:2007+A2:2012 防盗锁组件.无钥匙孔

Thief resistant lock assembly. Keyless egress

BS 8621:2007+A1:2009 防盗锁组件.无钥匙孔

This British Standard specifies performance requirements and test methods for a thief resistant mechanically operated single-point lock assembly (including locking plates, fixing screws, fitting instructions, cylinders and protective furniture where appropriate) that: a) incorporates a lock conforming to BS EN 12209 field of door application grades A, B, C, D, E, F or J, i.e. a lock that can always be unlocked from the inside without a key thereby only allowing keyless egress; and b) is used in doors, window doors and entrance doors in buildings. This standard does not cover thief resistant lock assemblies that only allow egress using a removable key, or lock assemblies that provide a secure (no egress) mode in addition to keyless egress. NOTE 1 Thief resistant lock assemblies that only allow egress using a key or assemblies that provide a secure (no egress) mode in addition to keyless egress are specified in separate standards, BS 3621 and BS 10621 (respectively), because they are sufficiently different in terms of what they offer for means of escape (from fire) and security. NOTE 2 It is possible that lock assemblies conforming to this standard are not suitable for use on doors constructed from certain types of material, e.g. plastic or aluminium. The marking on the packaging of the lock assembly will provide this information in accordance with 9.2. NOTE 3 A lock or latch assembly conforming to this standard can be included as part of an exit device that conforms to BS EN 179 or BS EN 1125.

Thief resistant lock assembly - Keyless egress