Y73 日用五金制品 标准查询与下载

DIN 3419-1:1998 拉链.第1部分:交付技术状态

The document contains the technical delivery conditions for metallic and plastic slide fasteners.

Slide fasteners - Part 1: Technical delivery conditions

DIN 3417:1998 金属拉链.设计类型,尺寸和材料

The document specifies design types, dimensions and materials for metallic slide fasteners.#,,#

Metallic slide fasteners - Design types, dimensions, materials

BS 6499:1998 金属容器的金属螺旋颈、螺旋盖和内部密封件规范

This British Standard specifies requirements, including screw thread dimensions, for a range of metal screw necks for metal containers, and for the metal screw caps and inner seals intended for use as closures and tamper evident devices respectively.

Metal screw necks, screw caps and inner seals for metal containers - Specification

DIN 18263-4:1997 建筑五金.受控门锁.第4部分:带自动旋转叶片驱动的门锁

Building hardware - Controlled door closing devices - Part 4: Automatic swing-door operator

DIN 18263-1:1997 建筑五金.受控门锁.第1部分:用曲轴传动和螺旋弹簧的门锁

The document applies to pot-type door closers (blount system) with hydraulic damping. Doors fitted with this type of door closer are self-closing.The standard gives a guide to the choice of the correct sizes of pot-type door closers, prescribes the fixing dimensions and provides details of requirements, testing, monitoring and marking.#,,#

Building hardware - Controlled door closing devices with hydraulic damping - Part 1: Surface(top) mounted door closer with crank drive and spiral spring (pot-type door closer)

ARMY A-A-59100-1997 一般用途小折刀[被取代: ARMY MIL-K-818 D CANC NOTICE 1, ARMY MIL-K-818 D, ARMY MIL-K-818 C (3), ARMY MIL-K-818 C (2), ARMY MIL-K-818 C (1), ARMY MIL-K-818 C, ARMY MIL-K-818 B]

This commercial item description(CID) covers one type and size general purpose pocket knife made of corrosion-resistant steel and consisting of a cutting blade, a can opener blade, a leather punch blade, a combination screwdriver and bottle cap lifter blade, and a clevis.

KNIFE, POCKET, GENERAL PURPOSE [Superseded: ARMY MIL-K-818 D CANC NOTICE 1, ARMY MIL-K-818 D, ARMY MIL-K-818 C (3), ARMY MIL-K-818 C (2), ARMY MIL-K-818 C (1), ARMY MIL-K-818 C, ARMY MIL-K-818 B]

DLA A-A-55306-1997 缝帆工用编织针[被代替:DLA GGG-N-202 C CANC NOTICE 2,DLA GGG-N-202 C VALID NOTICE 1,DLA GGG-N-202 C,DLA GGG-N-202 B INT AMD 2,DLA GGG-N-202 B(1),DLA GGG-N-202 B]

This document covers needles intended to be used by sailmakers for sewing and repairing canvas.

NEEDLE, SAILMAKER'S [Superseded: DLA GGG-N-202 C CANC NOTICE 2, DLA GGG-N-202 C VALID NOTICE 1, DLA GGG-N-202 C, DLA GGG-N-202 B INT AMD 2, DLA GGG-N-202 B (1), DLA GGG-N-202 B]

ASTM F883-97 挂锁的性能规范

1.1 This specification contains environmental, functional, operational, and security requirements for padlocks. Included are function descriptions, cycle tests, operational tests, environmental tests, forcing tests, and surreptitious entry tests. No effort has been made to include criteria for specially made padlocks used by the Department of Defense or others in highly sensitive locations. 1.2 This specification describes and grades various levels of performance to provide users of the standard with criteria upon which to select suitable padlocks. 1.3 Tests described are laboratory tests and although they simulate field conditions as to attacks or the environment, they do not duplicate these conditions. Tests described are repeatable in the laboratory. 1.4 Some users of this standard may wish to use padlocks that have special attributes not related to security. These are found in 4.3. 1.5 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are provided for information only. 1.6 The following precautionary caveat pertains only to the test method portions, Sections 8 through 11, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Performance Specification for Padlocks

AIR FORCE QPL-8236-14-1996 惯性锁带卷筒

This list has been prepared for use by or for the government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defens

REEL, SHOULDER HARNESS, INERTIA LOCK

QB/T 2198-1996 手电筒

本标准规定了手电筒的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于前校光、后校光及固定光型的金属与非金属手电筒。 本标准不适用于充电、防爆、防水等特殊用途手电筒。

flashlight

SN/T 0504-1995 出口锁具检验规程

Rules for inspection of locks for export

QB/T 2141.2-1995 日用小刀锋利度测试方法

本标准规定了日用小刀锋利度测试的环境条件、仪器、测试材料、试验步骤和锋利度的确定。 本标准适用于日用小刀的锋利度测试。专用小刀亦可参照使用。

Test method for sharpness of daily-use knives

QB/T 2117-1995 通用水基金属净洗剂

本标准规定了通用水基金属净洗剂的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存条件。 本标准适用于清洗金属材料和金属零部件的通用水基净洗剂。这种产品主要由表面活性剂和多种添加剂组成。本标准不适用于溶荆基金属净洗剂和特殊用途(如洗飞机)的金属净洗剂。

Universal water-based metal cleaner

NF D69-301:1994 家具用锁.家具锁.一般特性

Fittings for furniture. Furniture locks. General characteristics.

UL 437-1994 钥匙锁

Key locks

QB/T 2002.1-1994 皮革五金配件 电镀层技术条件

本标准规定了皮革五金配件电镀层的镀种分类、技术要求、试验方法、检验规则。 本标准适用于各种皮革制品上的五金配件。

Specifications for electroplating coatings of leather hardware accessories

QB/T 2002.2-1994 皮革五金配件 表面喷涂层技术条件

本标准规定了皮革五金配件表面喷涂层(以下简称喷涂层)的分类、技术要求、试验方法、检验规则。 本标准适用于各种皮革五金配件表面喷塑层(以下简称喷塑层)或表面喷漆层(以下简称漆层)，皮革五金配件其他有机覆盖层亦可参照使用。

Specifications for surface spray coating of leather hardware accessories

QB/T 1966-1994 民用剪刀

本标准规定了民用剪刀的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于民用剪刀。

civil scissors

QB/T 1959-1994 手用缝纫针

本标准规定了手用缝纫针的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于缝衣、补缀、编织、刺绣.纺绿被褥以及工艺品、农副产品的加工等用途的中碳钢手用缝纫针(以下简称“手缝针”)。

hand with sewing needle

DIN 7406:1994 双行钮扣

The double rivet button forms a button from 2 parts, applicated for textils, leather and plastics by a thickness no more than 1,25 mm (fitted). The both parts together riveted allowed a connection from two sides (e.g. of tent awnings). The document gives dimensions, materials and performances.

Double rivet button