Y82 家具附件 标准查询与下载

KS B ISO 22879:2010 脚轮和车轮.家具用脚轮的要求

이 표준은 기술적 요구사항으로 캐스터와 가구에 대한 시험 요구사항과 적합한 치수에 대하여

Castors and wheels-Requirements for castors for furniture

DIN EN 15338:2010 家具五金件.加长组件及其构成的强度和耐久力.德文版本EN 15338-2007+A1-2010

Hardware for furniture - Strength and durability of extension elements and their components; German version EN 15338:2007+A1:2010

EN 15338:2007+A1:2010 家具五金.可拓元素及其组件的强度与耐久性

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the extension elements and the parts used for the attachment, e. g. screws. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Ageing and influences of heat and humidity are not included.

Hardware for furniture - Strength and durability of extension elements and their components

DIN 81407:2010 衣帽钩,窗帘钩及毛巾钩

This standard applies to coat hooks, curtain hooks, towel hooks and s-hooks for use on ships.

Coat hooks, curtain hooks and towel hooks

BS EN 15338:2007 家具五金件.加长组件及其构件的强度和耐久力

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Ageing and influences of heat and humidity are not included.

Hardware for furniture - Strength and durability of extension elements and their components

BS EN 15338:2007+A1:2010 家具五金件.加长组件及其构件的强度和耐久力

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Ageing and influences of heat and humidity are not included.

Hardware for furniture - Strength and durability of extension elements and their components

AS/NZS 4703:2007 家具中的电气布线

Specifies safety requirements for the installation of electrical wiring and equipment in furniture.

Electrical wiring in furniture

DIN EN 14703:2007 家具.非家用座椅连成一排的链接件.强度要求和试验方法

This European Standard specifies strength requirements and test methods for the links used for non-domestic seating, which can be linked together in a row. This European Standard does not specify strength or durability requirements for individual chairs as these are contained within EN 15373. Assessment of ageing and degradation is not included. Tests carried out according to this European Standard are intended to demonstrate the ability of the links to function correctly in their intended environment. It should be understood that fulfilling the requirements does not ensure that the links will operate as expected in circumstances or emergencies that cannot be foreseen.

Furniture - Links for non-domestic seating linked together in a row - Strength requirements and test methods; German version EN 14703:2007

DIN EN 12529 Berichtigung 1:2007 回旋脚轮和轮子.家具用回旋脚轮.转椅用回旋脚轮.要求.DIN EN 12529-1999技术勘误

Castors and wheels - Castors for furniture - Castors for swivel chairs - Requirements; German version EN 12529:1998, Corrigenda to DIN EN 12529:1999-05

DIN EN 15338:2007 家具五金件.加长组件及其构成的强度和耐久力

This European Standard specifies test methods and requirements for the strength and durability of all types of extension elements and their components for all fields of application, except table extensions. The tests consist of the application of loads, forces and velocities simulating normal functional use, as well as misuse, that might reasonably be expected to occur. With the exception of the corrosion test in 6.4, the tests are designed to evaluate properties without regard to materials, design/construction or manufacturing processes. The strength and durability tests only relate to the extension elements and the parts used for the attachment, e.g. screws. The strength and durability tests are carried out in a test frame with specified properties. The test results can only be used as a guide to the performance of a piece of furniture. The test results are only valid for the extension element tested. These results may be used to represent the performance of production models provided that the tested model is representative of the production model. Ageing and influences of heat and humidity are not included.

Hardware for furniture - Strength and durability of extension elements and their components; German version EN 15338:2007

NF D69-302:2007 家具五金件.扩展元件及其部件的强度和耐久力

Hardware for furniture - Strength and durability of extension elements and their components.

ASTM D7016-07 暴露于明火后床垫的边缘连接组件评定的标准试验方法

Evaluation of raw material components is a vital and ongoing part of any manufacturing operation, especially when each item can contribute to the technical performance of the final product. This standard measures the behavior of mattress edge binding and sewing thread during and after exposure to an open flame ignition source. Flame resistance of the components used to close the perimeter of a mattress is an important factor in limiting the potential of a bedding fire by preventing the chance for seam failure. Data which show a correlation of behavior for both the sewing thread and edge binding tape, when tested as a subassembly according to this method, and also when tested using a full scale composite mattress burn test, such as California TB 603, can provide the manufacturer with important information. These data can be valuable when selecting components to be used in the manufacture of its products which are designed to use mattress edge binding and sewing thread. The level of performance required for these components is (1) that they do not support the afterflame, and (2) that these components demonstrate post flame exposure characteristics which contribute to retaining the structural integrity of the subassembly. In case of a dispute arising from differences in reported results when using this test method for acceptance testing of commercial shipments, the purchaser and the supplier should conduct comparative tests to determine if there is a statistical bias between their laboratories. Competent statistical assistance is recommended for the investigation of bias. As a minimum, the two parties should take a group of test specimens which are as homogeneous as possible and which are from a lot of material of the type in question. The test specimens should then be sent to each laboratory for testing. The average results from the two laboratories should be compared using Studentrsquo;t-test and an acceptable probability level chosen by the two parties before testing is begun. If a bias is found, either its cause must be found and corrected or the purchaser and the supplier must agree to interpret future test results with consideration to the known bias.1.1 This standard measures the flammability characteristics of mattress edge bindings and sewing threads during and after exposure to an open flame ignition source.1.1.1 This test method is used to evaluate these components either independently or in combination for use in mattresses designed with a fire barrier fabric.The test method is used to evaluate mattress edge binding and sewing thread when the design requires the use of these components.1.1.2 This standard can be used as a screening test method to determine how sewing thread and mattress edge binding component combinations will perform. 1.2 This standard is used to measure and describe the response of materials, products, or subassemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.1.3 Fire testing of products and materials is inherently hazardous, and adequate safeguards for personnel and property shall be employed in conducting these tests.This test method may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method to Evaluate Edge Binding Components Used in Mattresses After Exposure to An Open Flame

DIN 68856-1:2004 家具五金件.术语和定义.第1部分:组合配件、搁板支撑物和吊架轨

This standard applies to assembly fittings, shelf supports and hanging rails and specifies the relevant terms and definitions. For better understanding, examples of pictorial representations have been included.

Hardware for furniture - Terms and definitions - Part 1: Assembly fittings, shelf supports and hanging rails

DIN 68852:2004 家具五金件.家具锁.要求和检验

Hardware for furniture - Furniture locks - Requirements and testing

DIN 68851:2004 家具五金件.家具锁和锁紧系统.术语和定义

This standard applies to furniture locks and locking systems and specifies the relevant terms and definitions. For better understanding, examples of pictorial representations have been included.#,,#

Hardware for furniture - Furniture locks and locking systems - Terms and definitions

DIN 68841:2004 家具五金件.折板支撑.要求和检验

This standard applies to flap stays to be fitted in furniture. It specifies requirements and test methods for long-lived products oriented on need and application. Testing is carried out on a reference particle board. Strength values in combination with other materials shall not be deduced.

Hardware for furniture - Flap stays - Requirements and testing

DIN 68840:2004 家具五金件.橱柜悬架.标称承载量的测定

Hardware for furniture - Cabinet suspension - Determination of nominal load carrying capacity

DIN 68856-3:2004 家具五金件.术语和定义.第3部分:抽屉滑轨和抽屉系统

Hardware for furniture - Terms and definitions - Part 3: Drawer slides and drawer systems

DIN 68856-2:2004 家具五金件.术语和定义.第2部分:家具铰链和襟翼铰链

This standard applies to furniture hinges and flap hinges and specifies the relevant terms and definitions. For better understanding, examples of pictorial representations have been included.#,,#

Hardware for furniture - Terms and definitions - Part 2: Furniture hinges and flap hinges

DIN 68859:2004 家具五金件.推拉门用滑轮配件.要求和检验

Hardware for furniture - Roller fittings for sliding doors - Requirements and testing