Y82 家具附件 标准查询与下载

DIN 68858:2004 家具五金件.抽屉滑轨、抽屉和伸长部分.要求和检验

This standard applies to drawer slides, drawers and extensions to be fitted in furniture. It specifies requirements and test methods for long-lived products oriented on need and application. Testing is carried out on a reference particle board. Strength values in combination with other materials shall not be deduced.#,,#

Hardware for furniture - Drawer slides, drawers and extensions - Requirements and testing

DIN 68857:2004 家具五金件.杯形铰链及其安装底板.要求和检验

Hardware for furniture - Cup hinges and their mounting plates - Requirements and testing

DIN 68856-8:2004 家具用五金件.术语和定义.第8部分:推拉门齿轮

This standard applies to sliding door gears and specifies the relevant terms and definitions. For better understanding, examples of pictorial representations have been included#,,#

Hardware for furniture - Terms and definitions - Part 8: Sliding door gears

DIN 68856-6:2004 家具五金件.术语和定义.第6部分:橱柜悬架托架

Hardware for furniture - Terms and definitions - Part 6: Cabinet suspension brackets

ISO 22884:2004 脚轮和轮子.1.1m/s(4 km/h)以上和最高至4.4m/s(16 km/h)的应用要求

This International Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors and wheels (which may include accessories), specifically for manually propelled or power-towed industrial applications at speeds over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h). Pneumatic wheels and drive wheels are not covered by this International Standard.

Castors and wheels - Requirements for applications over 1,1 m/s (4 km/h) and up to 4,4 m/s (16 km/h)

ISO 22878:2004 脚轮和轮子.试验方法和装置

This International Standard specifies the test methods and apparatus to be used to check the performance of castors and wheels. The tests to be used for specific types of castor and wheel, and the relevant acceptance criteria, values and applicability are given in ISO 22879 to ISO 22884.

Castors and wheels - Test methods and apparatus

ISO 22879:2004 脚轮和轮子.家具用脚轮的要求

This International Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors for furniture. It is applicable to castors for general furniture applications, but specifically excludes those for swivel chairs and other specialized applications. NOTE Castors for swivel chairs are specified in ISO 22880.

Castors and wheels - Requirements for castors for furniture

ISO 22880:2004 脚轮和轮子.转椅用脚轮的要求

This International Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing of castors, with or without braking devices, that will normally be used on swivel chairs.

Castors and wheels - Requirements for castors for swivel chairs

ISO 22882:2004 脚轮和轮子.医院床用脚轮的要求

This International Standard specifies the technical requirements, the appropriate dimensions and the requirements for testing of swivel castors for hospital beds with a wheel diameter of 100 mm or more, and which have a central locking device. Swivel castors may be used with the main principal dimensions.

Castors and wheels - Requirements for castors for hospital beds

ANSI/NFPA 32-2004 干洗设备

Covers the reasonable safeguards for the prevention and control of fire and explosion hazards incident to drycleaning operations and for the protection of the employees and the public.

Drycleaning Plants

BS 4723:2002 装饰家具用弹性罩布规范

This British Standard specifies make-up and performance requirements for cleanable stretch covers, made from knitted fabrics, for domestic upholstered furniture.

Stretch covers for upholstered furniture - Specification

QB/T 2454-1999 家具五金 抽屉导轨 要求和检验

本标准规定了抽屉导轨的技术要求、检验方法和检验报告等内容。 本标准适用于可安装在家具(包括办公家具)上的抽屉导轨。

Requirements and inspections for furniture hardware drawer rails

GSA A-A-1975 B-1997 木销钉

This commercial item description covers wooden dowel rods for general purpose use.

DOWEL, WOOD

BS 3173:1996 床垫用弹簧组合件规范

This British Standard specifies requirements for open coil and pocketed mattress spring units used for the construction of spring interior mattresses, and includes performance tests. Details of the test procedure are given in annex A and suitable test apparatus is described in annex B.

Specification for spring units for mattresses

QB/T 2189-1995 家具五金 杯状暗铰链及其安装底座要求和检验

本标准规定了对杯状暗铰链及其安装底座(安装底座可以安装在家具旁板上)的各项要求以及所采用的检验方法。

Requirements and inspections for furniture hardware cup-shaped concealed hinges and their mounting bases

JIS S 1038:1994 办公椅的小脚轮

この規格は，事務いす用キャスター(以下，キャスターという。)について規定する。

Castors for office chairs

prEN 912-1992 木材紧固件.木材连接器规范

Timber fasteners; specifications for connectors for timber

EN 60335-2-43:1989/A51:1992 家用及其类似用途电器的安全.第2部分第43节:衣服烘干器和毛巾架的特殊要求.修改件A51

Safety of household and similar electrical appliances; part 2: particular requirements for clothes dryers and towel rails; amendment A51

QB/T 1242-1991 家具五金 杯状暗铰链安装尺寸

本标准规定了家具用杯状暗铰链的基本安装尺寸。 本标准适用于家具用杯状暗铰链的设计、制造和安装。

Installation dimensions of cup-shaped concealed hinges for furniture hardware

QB/T 1241-1991 家具五金 家具拉手安装尺寸

本标准规定了家具拉手的安装尺寸。 本标准适用于家具拉手在家具上的安装及其设计。

Installation dimensions of furniture hardware and furniture handles