Z25 废气排放污染物分析方法 标准查询与下载
共找到 180 条与 废气排放污染物分析方法 相关的标准，共 12 页
이 표준은 대기 중의 이산화탄소 농도를 고정밀도로 측정하는 방법에 대하여 규정한다.
Methods for determination of carbon dioxide in air
- ICS
- CCS
- Z25
- 发布
- 2008-11-12
- 实施
- 2008-11-12
Reciprocating internal combustion engines - Exhaust emission measurement - Part 2 : measurement of gaseous and particulate exhaust emissions under field conditions.
- ICS
- 13.040.50;27.020
- CCS
- Z25
- 发布
- 2008-11-01
- 实施
- 2008-11-01
This European Standard specifies the following requirements: a) requirements for measurement sections and sites with respect to performing emission measurements; b) requirements for the measurement objective, plan and report of emission measurements of air pollutants and reference quantities to be carried out in waste gas ducts at industrial plants. This European Standard applies to periodic measurements using manual or automated reference methods (RM). This European Standard specifies generic principles which can be applied to perform emission measurements at different plant types and to meet different measurement objectives. NOTE The measurement objective is specified by the customer. The testing institute identifies the measurement objective and related regulatory requirements at the beginning of the measurement planning. Where measurements are being made for regulatory purposes, the customer should seek approval from the competent authority. This European Standard specifies procedures for taking representative samples in waste gas ducts. This European Standard specifies a procedure for finding the best available sampling point for automated measuring systems used for continuous monitoring of emissions. The planning and reporting aspects of this European Standard are applicable to emission measurements at diffusive and fugitive emission sources. This European Standard does not address aspects of structural safety of chimneys and ducts, construction of working platforms and safety of personnel using them.
Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report; English version of DIN EN 15259:2008-01
- ICS
- 13.040.40
- CCS
- Z25
- 发布
- 2008-01
- 实施
Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites for the measurement objective, plan and report.
- ICS
- 13.040.40
- CCS
- Z25
- 发布
- 2007-11-01
- 实施
- 2007-11-24
이 규격은 각 배출 가스 오염물질에 대한 물성치를 결정하기 위하여 시험대 위에서 정상 상태
Reciprocating internal combustion engines－Exhaust emission measurement－Part 1 : Test-bed measurement of gaseous and particulate exhaust emissions
- ICS
- 13.040.50;27.020
- CCS
- Z25
- 发布
- 2007-08-31
- 实施
- 2007-08-31
이 규격은 KS R ISO 8178-1과 함께 각 배출 가스 오염에 대한 가중값을 결정하는
Reciprocating internal combustion engines－Exhaust emission measurement－Part 2：Measurement of gaseous and particulate exhaust emissions at site
- ICS
- 13.040.50;27.020
- CCS
- Z25
- 发布
- 2007-08-31
- 实施
- 2007-08-31
이 규격은 정상 상태 하에서 작동하는 왕복 내연(RIC) 기관의 배출 가스 스모크 특성의
Reciprocating internal combustion engines－Exhaust emission measurement－Part 3：Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
- ICS
- 13.040.40;27.020
- CCS
- Z25
- 发布
- 2007-08-31
- 实施
- 2007-08-31
この規格は，排ガス中の硫黄酸化物を分析する方法(以下，分析方法という。)について規定する。 備考1.この規格において，排ガスとは，燃料などの燃焼，鉱石のばい焼，金属の精錬，硫黄製造工程，その他の化学反応，脱硫工程などにおいて，煙道，煙突，ダクトなどに排出されるガスをいう。
Methods for determination of sulfur oxides in flue gas
- ICS
- 13.040.40;71.040.40
- CCS
- Z25
- 发布
- 2005-06-20
- 实施
이 규격은 왕복 운동 피스톤 내연 기관에 사용되는 지름 38∼160 mm까지로 타입 HK
Internal combustion engines-Piston rings-Part 4:Half keystone rings made of steel
- ICS
- 43.060.10
- CCS
- Z25
- 发布
- 2004-12-30
- 实施
- 2004-12-30
이 규격은 코일 스프링이 장착된 주철재 오일 링인 타입 DSF-C, SSF, GSF, DS
Internal combustion engines-Piston rings-Part 2:Coil-spring-loaded oil control rings of narrow width made of cast iron
- ICS
- 43.060.10
- CCS
- Z25
- 发布
- 2004-12-30
- 实施
- 2004-12-30
이 규격은 화재 생성물의 급성 흡입 독성을 결정하는 데 적합한 방법에 대한 지식을 제공
Toxicity testing of fire effluents-Part 2:Guidelines for biological assays to determine the acute inhalation toxicity of fire effluents(basic principles, criteria and methodology)
- ICS
- 13.220.99
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 규격에서는 화재 생성물 중에서 일산화탄소(CO), 이산화탄소(CO2), 산소(O2)
Toxicity testing of fire effluents-Part 3:Methods for the analysis of gases and vapours in fire effluents
- ICS
- 13.220.99
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 규격은 화재 생성물 분위기의 독성 평가에 유용하게 사용될 수 있는 수학적인 모델링의
Toxicity testing of fire effluents - Part 5 Prediction of toxic effects of fire effluents
- ICS
- 13.220.99
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 규격은 화재에서의 독성 위험을 평가하기 위한 시험 방법을 개발하는 데 있어 필요한
Toxicity testing of fire effluents-Part 1:General
- ICS
- 13.220.99
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 규격의 내용은 표준 시험에 사용되는 화재 모델의 사용에 대한 제안과 함께 화재 생성
Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)
- ICS
- 13.220.99
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
이 부분은 건물과 운송 수단 화재 시의 독성 위험 요소를 평가하는 기관과 규정 제정자에게
Toxicity testing of fire effluents-Part 6:Guidance for regulators and specifiers on the assessment of toxic hazard in fires in buildings and transport
- ICS
- CCS
- Z25
- 发布
- 2004-10-19
- 实施
- 2004-10-19
