Z61 矿区、原材料等工业污染物排放标准 标准查询与下载

HJ/T 190-2006 清洁生产标准 基本化学原料制造业 (环氧乙烷/乙二醇)

本标准适用于乙烯、氧气直接氧化法生产环氧乙烷/乙二醇企业的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告制度。

Cleaner production standard.Basic chemical raw material industry (Ethylene oxide & ethylene glycol)

HJ/T 189-2006 清洁生产标准 钢铁行业

本标准适用于钢铁联合企业和短流程电炉钢厂的总体清洁生产审核、清洁生产绩效评定和清洁生产绩效公告制度。 企业中的配套焦化厂和企业自备火电厂的清洁生产审核及绩效评定分别执行国家颁布的相应专业标准。

Cleaner production standard.Iron and Steel industry

HJ/T 188-2006 清洁生产标准 氮肥制造业

本标准适用于氮肥企业的清洁生产审核、清洁生产潜力与机会判断、清洁生产绩效评定和清洁生产绩效公告制度。

Cleaner production standard.Nitrogenous Fertilizer industry

HJ/T 185-2006 清洁生产标准.纺织业(棉印染)

本标准适用于纺织行业（棉印染）生产企业（含棉、棉混纺及交织产品）的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告制度。

Cleaner production standard.Textile industry (Dyeing and finishing of cotton)

HJ/T 187-2006 清洁生产标准 电解铝业

本标准适用于电解铝生产企业的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告制度。

Cleaner production standard.Aluminum electrolytic industry

ARMY MIL-DTL-70794 A-2006 M940型20MM多功能微量自毁弹金属零件

The documents listed in this section are specified in sections 3 or 4 of this specification. This section does not include documents cited in other sections of this specification or recommended for additional information or as examples. While every effort has been made to ensure the completeness of this list, document users are cautioned that they must meet all specified requirements of documents cited in sections 3 and 4 of this specification, whether or not they are listed

PROJECTILE, M940 - 20MM, MULTIPURPOSE, TRACE SELF-DESTRUCT, METAL PARTS

AQ 2006-2005 尾矿库安全技术规程

本规程规定了尾矿库在建设、生产运行、安全检查、安全度、闭库、再利用、安全评价等方面的安全要求。 本规程适用于中华人民共和国境内金属非金属矿物选矿厂尾矿库、氧化铝厂赤泥库。其他湿式堆存工业废渣库、电厂灰渣库和干式处理的尾矿库可参照执行。

Safety technical regulations for the tailings pond

AQ 2005-2005 金属非金属矿山排土场安全生产规则

本规则规定了金属非金属矿山排土场的设计、生产作业管理和关闭等环节的安全要求及安全防护、评价与管理、监督与检查要求，以防止排土场事故的发生。 本规则适用于金属非金属矿山的排土场或废石场。水力输送排土场的设计、生产作业、管理和关闭按尾矿库有关规定执行。

Waste dump safety regulations for metal & nonmetal mines

ARMY MIL-B-11595 E (1)-2004 用于轻兵器枪管的杆.金属及空弹.钢铁(2英寸的半径)

This specification covers alloys steel, bars and blanks under 2 inches in diameter for use in the manufacture of barrels for small arms weapons(see 6.1 and 6.3).

BAR, METAL AND BLANKS, STEEL (UNDER 2 INCHES IN DIAMETER) FOR BARRELS OF SMALL ARMS WEAPONS

ARMY MIL-DTL-0045585 E-2004 M16A2型40MM金属带链接枪弹

This specification covers one type of link designated as Link, Cartridge: Metallic Belt, 40MM: M16A2.

LINK CARTRIDGE: METALLIC BELT, 40MM - M16A2

ARMY MIL-DTL-0063092 B-2004 M583A1型40MM.白光降落弹.M661型绿光降落弹.M662型红光降落弹金属零件的装载[代替:ARMY MIL-C-50447 A NOTICE 2.ARMY MIL-C-60452 A NOTICE 2]

This specification covers the metal parts and loading, and assembling for three cartridges with different color illuminants designated as Cartridge, 40mm, White Star Parachute, M583A1, Green Star, Parachute, M661 and Red Star Parachute, M662.

CARTRIDGES, 40MM, WHITE STAR, PARACHUTE, M583A1 GREEN STAR, PARACHUTE, M661 RED STAR, PARACHUTE, M662 METAL PARTS AND LOADING, ASSEMBLIES [Use In Lieu Of: ARMY MIL-C-50447 A NOTICE 2, ARMY MIL-C-60452 A NOTICE 2]

ARMY MIL-C-70733 (4)-2003 火山矿霰弹用垫层和金属容器支持组件

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

CUSHION AND SUPPORT COMPONENTS FOR METAL CONTAINER FOR VOLCANO MINE CANISTER

HJ/T 126-2003 清洁生产标准.炼焦行业

本标准适用于常规机械化焦炉焦炭生产企业的炼焦、煤气净化工段及主要产品生产（不包括化学产品深加工和生活消耗）的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告制度。

Cleaner production standard Coking industry

HJ/T 125-2003 清洁生产标准.石油炼制业

本标准适用于石油炼制业燃料型炼油厂的清洁生产审核、清洁生产潜力与机会的判断、清洁生产绩效评定和清洁生产绩效公告制度。燃料-润滑油型、燃料-化工型石油炼制企业可参照执行。

Cleaner production standard Petroleum refinery industry

ARMY MIL-C-50871 C (2)-2003 M433型高爆双用途榴弹.弹丸金属零件

This amendment forms a part of MIL-C-50871C(AR), dated 22 July 1981, and is approved for use by the U.S. Army Armament Research, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

CARTRIDGE, 40MM, HEDP, M433; PROJECTILE METAL PARTS FOR

NAVY GGG-H-575 NOTICE 1-2001 中孔并周边抓紧金属板支撑架

This notice should be filed in front of GGG-H-575, dated 15 July 1999. GGG-H-575, dated 10 November 1966, with Amendment 1, dated 15 July 1999, is inactive for new design and is no longer used except for replacement purposes.

HOLDER, SHEET METAL, HOLE AND EDGE GRIP

ARMY MIL-STD-171 E CHG NOTICE 1-2001 金属胶合木表面修整

TABLE IV, Note 1/, delete “MIL-P-116” and substitute “MIL-STD-2073”.

FINISHING OF METAL AND WOOD SURFACES

ARMY MIL-L-45585 D (1)-2000 M16A2型40MM金属带链接枪弹

This amendment forms a part of Military Specification MIL-L- 45585D(AR), dated 12 September 1983, and is approved for use by the U.S. Army Armament, Research, Development, and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

LINK CARTRIDGE: METALLIC BELT, 40MM - M16A2

NAVY GGG-H-575 (1)-1999 中孔并周边抓紧金属板支撑架

The General Services Administration has authorized the use of this amendment which forms a part of GGG-H-575, dated November 10, 1966, by all federal agencies.

HOLDER, SHEET METAL, HOLE AND EDGE GRIP

NAVY A-A-59318-1998 金属铝抛光

This commercial item description (CID) covers a metal polish used for polishing unpainted aluminum and aluminum alloy surfaces of aircraft. The abrasive quality of the polish enables it to remove tarnish and produce a high lasting shine. The polish shall not be used on aluminum aircraft surfaces that are to be painted with organic coating materials, unless silicone residue is removed with xylene prior to painting.

POLISH, METAL, ALUMINUM [Superseded: NAVY MIL-P-6888 C CANC NOTICE 2, NAVY MIL-P-6888 C VALID NOTICE 1, NAVY MIL-P-6888 C, NAVY MIL-P-6888 B, NAVY MIL-P-6888]