Z61 矿区、原材料等工业污染物排放标准 标准查询与下载

AIR FORCE MIL-A-83376 A NOTICE 2-1997 粘合的金属面夹层结构接受标准

MIL-A-83376A, dated 30 Jul 87, is inactive for new design and is no longer used, except for replacement purposes.

ADHESIVE BONDED METAL FACED, SANDWICH STRUCTURES, ACCEPTANCE CRITERIA

ASTM D6187-97(2003) 带有氮激光感应荧光的石油污染位点的锥形透度计技术特性的标准操作规程

1.1 This practice covers the method for delineating the subsurface presence of petroleum hydrocarbons and other hydrocarbons using a fiber optic based nitrogen laser-induced fluorescence sensor system.1.2 The petroleum hydrocarbon sensing scheme utilizes a fluorescence technique in which a nitrogen laser emits pulsed ultraviolet light. The laser, mounted on the cone penetrometer platform, is linked via fiber optic cables to a window mounted on the side of a penetrometer probe. Laser energy emitted through the window causes fluorescence in adjacent contaminated media. The fluorescent radiation is transmitted to the surface via optical cables for real-time spectral data acquisition and spectral analysis on the platform.1.3 This sensor responds to any material that fluoresces when excited with ultraviolet wavelengths of light, largely the polycyclic aromatic, aromatic, and substituted hydrocarbons, along with a few heterocyclic hydrocarbons. The excitation energy will cause all encountered fluorophores to fluoresce, including some minerals and some non-petroleum organic matter. However, because the sensor collects full spectral information, discrimination among the fluorophores may be distinguished using the spectral features associated with the data. Soil samples should be taken to verify recurring spectral signatures to discriminate between fluorescing petroleum hydrocarbons and naturally occurring fluorophores.1.4 This practice is used in conjunction with a cone penetrometer of the electronic type, described in Test Method D 5778.1.4.1 The direct push LIF described in this practice can provide accurate information on the characteristics of the soils and contaminants encountered in the vadose zone and the saturated zone, although it does not make a distinction between dissolved and sorbed contamination in the saturated zone.1.5 This practice describes rapid, continuous, in-situ, real-time characterization of subsurface soil.1.6 Direct push LIF is limited to soils that can be penetrated with the available equipment. The ability to penetrate strata is based on carrying vehicle weight, density of soil, and consistency of soil. Penetration may be limited; or, damage to sensors can occur in certain ground conditions.1.7 This practice does not address the installation of any temporary or permanent soil, ground water, soil vapor monitoring, or remediation devices; although, the devices described may be left in-situ for the purpose of on-going monitoring.1.8 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only.1.9 Direct push LIF environmental site characterization will often involve safety planning, administration, and documentation. This practice does not purport to address the issues of operational or site safety.1.10 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

ARMY MIL-B-50999 (3)-1996 M122型辅助扩爆药金属零件的组装的装载

This amendment forms a part of MIL-B-50999(AR), dated 07 December 1971, and is approved for use by the U.S. Army Armament ReL?arch, Development and Engineering Center, and is available for use by all Departments and Agencies of the Department of Defense.

BOOSTER, AUXILIARY, M122, METAL PARTS FOR, AND ASSEMBLY AND LOADING OF

ARMY MIL-M-63287 NOTICE 1-1996 杀伤地雷XM74(M74)金属零件

This notice should be filed in front of MIL-M-63287(AR), dated 24 July 1979

MINE, ANTIPERSONNEL, XM74 (M74) METAL PARTS FOR

ARMY MIL-C-63106 A NOTICE 1-1996 M-1型对抗金属碎箔

This notice should be filed in fiont of MIL-C-63106A(AR), dated 14 June 1983.

COUNTERMEASURE, CHAFF: M-1

ARMY MIL-B-60410 NOTICE 2-1996 10 CAP容量的金属药筒手柄操作爆破机

This notice should be filed in front of MIL-B-6041O(AR), dated 21 September 1966

BLASTING MACHINE, HANDLE OPERATED, METAL CASE 10 CAP CAPACITY

ARMY MIL-B-50999 NOTICE 1-1996 M122型辅助扩爆药金属零件的组装的装载

This notice should be filed in front of MIL-B-50999(AR), dated 7 December 197 1

BOOSTER, AUXILIARY, M122, METAL PARTS FOR, AND ASSEMBLY AND LOADING OF

ARMY MIL-L-12997 F NOTICE 2-1996 M12型20MM装有金属带的炮弹链

This notice should be filed in front of MIL-L-l2997F(AR), dated 24 October 1983 MIL-L-l2997F(AR), dated 24 October 1983 with Validation Notice 1, dated 2 February 1989 is inactive for new desigr_ and is no longer used, except for replacement purposes.

LINK, CARTRIDGE, METALLIC BELT 20MM: M12

ARMY MIL-L-45946 A NOTICE 2-1996 M22型20MM装有金属带的炮弹链

This notice should be filed in fiont of MIL-L-45946A(AR), dated 17 August 1979 MIL-L-45946A(AR), dated 17 August 1979, with Amendment 2, dated 16 March 1984, and Validation Notice 1, dated 2 August 1989, is inactive for new design and is no longer used, except for replacement purposes.

LINK, CARTRIDGE, METALLIC BELT, 20MM: M22

ARMY MIL-L-45456 E NOTICE 1-1996 M17A2型20MM装有金属带的炮弹链

This notice should be filed in fiont of MIL-L-45456E(AR), dated 6 December 1985

LINK, CARTRIDGE, METALLIC BELT, 20MM: M17A2 [Use In Lieu Of: ARMY MIL-L-0045456 A INT AMD 1]

ARMY MIL-M-12760 B NOTICE 2-1996 M14E1型装有固有引信零件的非金属反步兵地雷

This notice should be filed in front of MIL-M-l2760B(AR), dated 15 November 1963

MINE, ANTI-PERSONNEL NON-METALLIC, M14E1 WITH INTEGRAL FUZE PARTS FOR

AIR FORCE A-A-58054-1996 非纺织非金属研磨垫[取代:空军MIL-A-9962 A CANC通知1 ,空军MIL-A-9962 A( 4 ) ,空军MIL-A-9962 A( 3 ) ,空气MIL-A-9962 A( 2 ) ,空军MIL-A-9962 A( 1 ) ,空军MIL-A-9962 A]

This commercial item description covers non-woven, non-metallic mats made of nylon fiber. The commercially available mats shall be suitable for cleaning, scouring, finishing, or preparing metal surfaces.

ABRASIVE MATS, NON-WOVEN, NON-METALLIC [Superseded: AIR FORCE MIL-A-9962 A CANC NOTICE 1, AIR FORCE MIL-A-9962 A (4), AIR FORCE MIL-A-9962 A (3), AIR FORCE MIL-A-9962 A (2), AIR FORCE MIL-A-9962 A (1), AIR FORCE MIL-A-9962 A]

ARMY MIL-L-63532 C NOTICE 1-1996 M27型5.56MM装有金属带的炮弹链

This notice should be filed in front MIL-L-ó3532C(AR), dated 4 June 1984

LINK, CARTRIDGE, METALLIC BELT, 5.56MM, M27

ARMY MIL-C-63092 A NOTICE 1-1996 M583A1型40MM.白光降落弹.M661型绿光降落弹.M662型红光降落弹金属零件的装载

This notice should be filed in front of MIL-C-63092A(AR) dated 28 May 1991 MIL-C-63092A dated 28 May 1991 is inactive for new design and is no longer used, except for replacement purposes

CARTRIDGES, 40MM, WHITE STAR, PARACHUTE, M583A1 GREEN STAR, PARACHUTE, M661 RED STAR, PARACHUTE, M662 METAL PARTS AND LOADING, ASSEMBLIES

ARMY MIL-C-60985 A NOTICE 2-1996 M118型40MM炮弹筒的金属零件

This notice should be filed in front of MIL-C-60985A(AR) dated 22 March 1969.

CASE, CARTRIDGE, 40MM, M118 METAL PARTS FOR

ARMY MIL-C-71178 NOTICE 1-1996 M922A1型40MM高流速仿真炮弹金属零件

This notice should be filed in front of MIL-C-71178(AR), dated 10 June 1993 MIL-C-71178(AR), dated 10 June 1993,is inactive for new design and is no longer used,

CARTRIDGE, 40MM, HIGH VELOCITY, DUMMY, M922A1 METAL PARTS FOR

ARMY MIL-C-50242 NOTICE 2-1996 M383型40MM高爆炮弹:金属零件的主体组件

This notice should be filed in front of MIL-C-50242(AR) dated 4 August 1971

CARTRIDGE, 40MM, HE, M383: BODY ASSEMBLY FOR METAL PARTS

ARMY MIL-C-50871 C NOTICE 2-1996 M433型高爆双用途榴弹.弹丸金属零件

This notice should be filed in front of MIL-C-50871C(AR) dated 22 July 1981

CARTRIDGE, 40MM, HEDP, M433; PROJECTILE METAL PARTS FOR

ARMY MIL-C-50870 C NOTICE 2-1996 M433型高爆双用途榴弹.金属零件的衬垫

This notice should be filed in front of MIL-C-50870C(AR) dated 22 July 1981

CARTRIDGE, 40MM, HEDP, M433: LINER FOR METAL PART

ARMY MIL-C-50862 A NOTICE 2-1996 M430型高爆双用途榴弹.金属零件的衬垫

This notice should be filed in front of MIL-C-50862A(AR) dated 29 March 1976 MIL-C-50862A dated 29 March 1976 with Amendment 2, dated 4 November 1993 and Validation Notice 1, dated 21 May 1987 is inactive for new design and is no longer used, except for replacement purposes.

CARTRIDGE, 40MM, HEDP, M430; LINER FOR METAL PARTS [Superseded: ARMY MIL-DTL-50863 F CONT. DIST., ARMY MIL-DTL-50863 E (1) CONT. DIST., ARMY MIL-DTL-50863 E CONT. DIST., ARMY MIL-DTL-0050863D, ARMY MIL-C-50863C NOTICE 1, ARMY MIL-C-50863C, ARMY MIL-C