Q71 木构配件 标准查询与下载



共找到 291 条与 木构配件 相关的标准,共 20

本标准规定了混凝土模板用木工字梁的定义、要求、检验方法、检验规则、使用说明以及标识和包装。本标准适用于混凝土模板用木工字梁产品。

Wood I beams for concrete form

ICS
91.220
CCS
Q71
发布
2014-12-05
实施
2015-03-11

本标准规定了木门窗的术语和定义、分类与标记、要求、试验方法、检验规则、标志和运输、包装和贮存。本标准适用于建筑用木门和木窗。

Wood windows and doors

ICS
91.060.50
CCS
Q71
发布
2013-05-07
实施
2013-12-01

  现批准《建筑装饰用木质挂板通用技术条件》为建筑工业行业产品标准,编号为JG/T569-2019,自2019年12月1日起实施。   本标准在住房和城乡建设部门户网站(www.mohurd.gov.cn)公开,并由住房和城乡建设部标准定额研究所组织中国标准出版社出版发行。                                    中华人民共和国住房和城乡建设部                                        2019年7月18日  

General technical conditions for wooden siding used in building decoration

ICS
91.080.40
CCS
Q71
发布
2019-07-18
实施
2019-12-01

This European Standard advises on the safe use of ladders covered by the scope of EN 131-1 and fulfilling the requirements of EN 131-1, EN 131-2 and, for single or multiple hinged-joint ladders, EN 131-4 used as standing or leaning ladders.

Ladders - Part 3:User instructions

ICS
97.145
CCS
Q71
发布
2018-07-12
实施
2018-07-12

外观和主要尺寸及其偏差,装配尺寸要求,性能要求,试验方法要求,检验规则要求,标志、包装、运输、贮存和随行文件要求。

Ecologic Interior Door for Building

ICS
97.140
CCS
Q71
发布
2017-12-15
实施
2017-12-15

Technical regulations for mechanized construction of dry mixed mortar

ICS
91.060.50
CCS
Q71
发布
2017-08-21
实施
2018-06-01

Wooden door sales and service specifications

ICS
91.060.50
CCS
Q71
发布
2017-08-21
实施
2018-06-01

Application of construction products in structures - Part 1: Wood based panels

ICS
79.060.01;91.080.20
CCS
Q71
发布
2017-06
实施

Wood paving

ICS
79.080
CCS
Q71
发布
2017-06
实施

This European Standard specifies test methods for the determination of characteristics of melamine faced boards (MFB) as defined in EN 14322.

Wood-based panels - Melamine faced boards for interior uses - Test methods

ICS
79.060.20
CCS
Q71
发布
2017-03
实施

This European Standard specifies the surface requirements and dimensional tolerances for decorative melamine faced boards for interior use which are common for particleboards, extruded particleboards fibreboards and sandwich boards for furniture. This standard does not apply to boards laminated with so called priming foils or finish foils and laminates according to EN 438-1. This standard does not apply to laminate floor coverings. Melamine faced wood-based boards in accordance with this standard may be referred to as MFB.

Wood-based panels - Melamine faced board for interior uses - Definition@ requirements and classification

ICS
79.060.20
CCS
Q71
发布
2017-03
实施

This European Standard defines the classification of test results for: - windows; and; - external and internal pedestrian doorsets; completely assembled, of any materials after testing in accordance with EN 1026.

Windows and Doors - Air Permeability - Classification

ICS
91.060.50
CCS
Q71
发布
2016-12
实施

This European Standard identifies material independent performance characteristics, except resistance to fire and smoke control characteristics, that are applicable to windows (including roof windows, roof windows with external fire resistance and door height windows), external pedestrian doorsets (and their assemblies, including unframed glass doorsets, escape route doorsets) and screens. Fire resisting and/or smoke control characteristics for pedestrian doorsets and openable windows are covered by EN 16034. This European Standard applies to: a) fixed windows or fixed lights, manually or power operated windows and door height windows, and screens for installation in vertical wall apertures and roof windows for installation in roofs, complete with: 1) related hardware, if any; 2) weather stripping, if any; 3) glazed apertures when intended to have glazed apertures; 4) with or without incorporated shutters and/or shutter boxes and/or blinds; and manually or power operated windows, roof windows, door height windows and screens that are: 5) fully or partially glazed including any non-transparent infill; 6) fixed or partly fixed or openable with one or more casements/sashes (e. g. hinged, projecting, pivoted, sliding); b) manually operated external pedestrian doorsets with flush or panelled leaves, complete with: 1) integral fanlights, if any; 2) adjacent parts that are contained within a single frame for inclusion in a single aperture, if any. The windows covered by this standard are not assessed regarding their ability to release (to open). The products covered by this European Standard are not assessed for structural applications. This European Standard does not apply to:- rooflights according to EN 1873 and EN 14963; - curtain walling according to EN 13830; - industrial, commercial and garage doors and gates according to EN 13241; - internal pedestrian doorsets according to prEN 14351-2; - revolving doorsets; - power operated pedestrian doorsets according to EN 16361; - windows intended to be part of internal partition.

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets

ICS
91.060.50
CCS
Q71
发布
2016-09
实施

1.1 General - This European Standard specifies the safety and performance requirements, except resistance to fire and smoke control characteristics, for industrial, commercial, garage doors and gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended uses are giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises. Fire resisting and/or smoke control characteristics for industrial, commercial, garage doors and gates are covered by EN 16034. This European Standard also covers commercial doors such as rolling shutters and rolling grilles used in retail premises which are mainly provided for the access of persons rather than vehicles or goods. These doors can include pass doors incorporated in the door leaf which are also covered by this European Standard. These devices can be manually or power operated. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3. 1.2 Exclusions - This European Standard does not apply to the following which are intended for a different use: - lock gates and dock gates; - doors on lifts; - doors on vehicles; - armoured doors; - doors mainly for the retention of animals; - theatre textile curtains; - horizontally moving power operated doors mainly intended for pedestrian use in accordance with EN 16361; - revolving doors of any size; - railway barriers; - barriers used solely for vehicles. This European Standard does not cover the radio part of doors. If a radio operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirement for doors which are moving because of energy stored by dedicated means from human power such as manually tensioned springs. This European Standard does not contain any specific requirements for doors on escape routes. The ability to open the door leaf safely and easily cannot normally be achieved by industrial, commercial and garage doors due to size, weight and/or mode of operation. The noise emission of powered doors and gates is not considered to be a relevant hazard. Therefore this European Standard does not contain any specific requirements on noise in relation to the Machinery Directive. 1.3 Specific applications - This European Standard should also apply to power operated doors which have been created by the addition of power operation to an installed manual door in respect of the relevant requirements. Annex ZA does not apply to this kind of door. It also identifies requirements and classes of performance for additional characteristics considered to be of importance to the trade. When a door is part of the load carrying structure of the building the requirements of this European Standard can apply on a voluntary basis in addition to the requirements for the load carrying structure, which are not dealt with in this European Standard. Annex ZA does not apply for this kind of doors.

Industrial, commercial, garage doors and gates - Product standard, performance characteristics

ICS
91.090
CCS
Q71
发布
2016-09
实施

DTU 36.2 - Building works - Interiors wood joinery - Part 1-1 : contract bill of technical model clauses

ICS
79.080;91.060.50
CCS
Q71
发布
2016-05-27
实施
2016-05-27

DTU 36.2 - Building works - Interiors wood joinery - Part 2 : contract bill of special administrative model clauses

ICS
79.080;91.060.50
CCS
Q71
发布
2016-05-27
实施
2016-05-27

DTU 36.2 - Building works - Interiors wood joinery - Part 1-2 : general criteria for choice of materials

ICS
79.080;91.060.50
CCS
Q71
发布
2016-05-27
实施
2016-05-27

This European Standard specifies the classifications, requirements and test methods for non-coated unplasticized poly(vinyl chloride) (PVC-U) profiles with light coloured surfaces intended to be used for the fabrication of windows and doors. It is applicable to PVC-U profiles with the colorimetric co-ordinates measured on the visible surfaces, as follows: L*>= 82 (chromaticity co-ordinate Y >= 60); -2,5

Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification@ requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces

ICS
83.140.99;91.060.50
CCS
Q71
发布
2016-03
实施

This European Standard defines the classification of test results for completely assembled windows and doors of any materials after testing in accordance with EN 12211.

Windows and doors - Resistance to wind load - Classification

ICS
91.060.50
CCS
Q71
发布
2016-03
实施

Principal joints of details of wood and wooden materials. Types and dimensions

ICS
79.040
CCS
Q71
发布
2016
实施
2017-03-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号