25.180.01 工业炉综合 标准查询与下载

GB/T 26657-2011 砂型烘干炉能耗评定

本标准规定了铸造用各种砂型(芯)烘干炉的能耗分等和可比单耗计算方法。 本标准适用于铸造用各种砂型(芯)烘干炉。

Evaluation of energy consumption for sand mold baking oven

GB/T 17195-1997 工业炉名词术语

本标准规定了工业炉（包括燃料炉和电炉）及其主要零部件的专用术语。有关电炉部分，参阅GB2900.23-1995《电工术语工业电热设备》。 本标准适用于制定标准，编制技术文件，编写和翻译专业手册、教材及书刊。

Industrial furnace terminology

T/CIET 430-2024 陶瓷梭式窑节能减碳量测量和验证技术要求

本文件规定了陶瓷梭式窑节能减碳改造项目的术语和定义、基本要求、测量和验证方案、方法和节能减碳量的报告内容。 本文件适用于对陶瓷梭式窑节能减碳技术改造项目节能量和碳减排量的测量和验证。

Technical requirements for measuring and verifying energy saving and carbon reduction in ceramic shuttle kilns

T/CIET 426-2024 连续式陶瓷窑节能减碳量测量和验证技术要求

本文件规定了连续式陶瓷窑节能减碳改造项目的术语和定义、基本要求、测量和验证方案、方法和节能减碳量的报告内容。 本文件适用于对连续式陶瓷窑节能减碳技术改造项目节能量和碳减排量的测量和验证。

Technical requirements for energy saving measurement and carbon reduction of continuous billet heating furnace

T/CIET 425-2024 连续式金属热处理炉节能减碳量测量和验证技术要求

本文件规定了连续式金属热处理炉节能减碳改造项目的术语和定义、基本要求、测量和验证方案、方法和节能减碳量的报告内容。 本文件适用于对连续式金属热处理炉节能减碳技术改造项目节能量和碳减排量的测量和验证。

Technical requirements for measurement and verification of energy saving and carbon reduction in continuous metal heat treatment furnaces

T/CIET 423-2024 管式加热炉蓄热燃烧装置技术要求

本文件规定了工业领域管式加热炉蓄热式燃烧装置的术语和定义、原理与流程、适用条件、技术要求、测试验收方法和使用维护事项。 本文件适用于工业领域管式加热炉蓄热式燃烧热利用技术领域。

echnical requirements for heat storage and combustion device of tubular heating furnace

T/CIET 424-2024 连续式钢坯加热炉节能减碳量测量和验证技术要求

本文件规定了连续式钢坯加热炉节能减碳改造项目的术语和定义、基本要求、测量和验证方案、方法和节能减碳量的报告内容。 本文件适用于对连续式钢坯加热炉节能减碳技术改造项目节能量和碳减排量的测量和验证。

Technical requirements for measuring and verifying energy saving and carbon reduction in continuous billet heating furnaces

T/CIET 422-2024 管式加热炉节能减碳量测量和验证技术要求

本文件规定了管式加热炉节能减碳改造项目的术语和定义、基本要求、测量和验证方案、方法和节能减碳量的报告内容。 本文件适用于对管式加热炉节能减碳技术改造项目节能量和碳减排量的测量和验证。

Technical requirements for energy saving and carbon reduction measurement and verification of tubular heating furnace

T/GDMIA 012-2024 锂离子电池电极材料制备用回转炉

前言 引言 1  范围　 2  规范性引用文件 3  术语和定义 4  结构、分类和型号、基本参数 4.1 结构 4.2 分类和型号 4.3 基本参数 5  技术要求 5.1 一般要求 5.2 外观要求 5.3 材料要求 5.4 功能要求 5.5 性能要求 5.6 安全环保要求 6 检验方法 6.1 检验条件 6.2 外观检验 6.3 材料检验 6.4 功能检验 6.5 性能检验 6.6 安全环保检验 7 检验规则 7.1 检验分类 7.2 出厂检验 7.3 型式检验 8 标志、包装、运输和贮存 8.1 标志 8.2 包装 8.3 运输 8.4 贮存 附录A（规范性）密封性试验 A.1 概述 A.2 气密性试验 A.3 渗漏试验 附录B（规范性）冷态运行试验 B.1 概述 B.2 冷态供料试验 B.3 冷态满载试验 附录C（规范性）热态运行试验 C.1 概述 C.2 空炉升温试验 C.3 模拟生产试验 附录D（资料性）UPS技术参数 D.1 UPS技术参数 参考文献

Rotary furnace for the preparation of electrode materials for lithium-ion batteries

T/HNEE 002-2023 绿色设计产品评价技术规范 台车式燃气热处理炉

本文件规定了台车式燃气热处理炉绿色设计产品的评价原则、评价要求、评价方法、评价流程和生命周期评价报告编制方法。 本文件适用于采用以天然气为主要绿色气体作为热源提供的台车式热处理炉（以下简称热处理炉）的绿色设计产品评价。

Technical specification for green-design product assessment —Car type gas heat treatment furnace

T/CASME 323-2023 全氢井式球化退火炉

本文件规定了全氢井式球化退火炉的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。

Full-hydrogen well type spheroidizing annealing furnace

ISO 13577-4:2022 工业炉和相关加工设备.安全.第4部分:保护系统

This document specifies the requirements for protective systems used in industrial furnaces and associated processing equipment (TPE). The functional requirements to which the protective systems apply are specified in ISO 13577-1 This document is not applicable to blast furnaces, converters (in steel plants), boilers, fired heaters (including reformer furnaces) in the petrochemical and chemical industries. This document is not applicable to electrical cabling and power cabling upstream of the TPE control panel/protective system. This document is not applicable to the protective systems manufactured before the date of its publication.

Industrial furnaces and associated processing equipment — Safety — Part 4: Protective systems

BS EN 746-3:2021 工业热处理设备 气氛气体产生和使用的安全要求

What is BS EN 746-3 - Industrial thermo-processing equipment about? BS EN 746-3 specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE). BS EN 743-3 applies to supply of atmosphere gas, source gas, inert gas, and process liquids to TPE and their removal from TPE, confined to equipment integrated in the TPE. BS EN 743-3 covers pipework downstream of and including the manual isolating valve, equipment for the generation of atmosphere gases, additional equipment for the use of atmosphere gases in TPE, safety devices and functional requirements for safety-related control system. NOTE- BS EN 746-3 does not apply to – Utility supply upstream of the TPE main disconnects TPE for semi-conductor devices Decommissioning of the TPE Vacuum furnaces, blast furnaces, converters etc. The relevant risks involved in the Flue gases ducting system which isn’t considered a part of TPE TPE with atmosphere such as air and flue gas from an over stoichiometric combustion It does not deal with the hazard of noise Who is BS EN 746-3 - Industrial thermo-processing equipment for? BS EN 746-3 on thermo-processing equipment is applicable to: Health and safety bodies (regulators, accident prevention organizations etc.) Maintenance service providers Heavy machinery manufacturers Heavy manufacturing industries Industries manufacturing thermo-processing equipment Why should you use BS EN 746-3 - In...

Industrial thermoprocessing equipment. Safety requirements for the generation and use of atmosphere gases

EN 746-3:2021 工业热处理设备.第3部分:生产和使用大气气体的安全要求

This part of the EN 746 series specifies safety requirements for generation and use of protective and reactive atmosphere gases that are part of industrial thermo-processing equipment (TPE). The general safety requirements common to TPE are provided in EN 746 1:1997+A1:2009 (see Introduction). This part of the EN 746 series deals with significant hazards, hazardous situations and events relevant to the generation and use of protective and reactive atmosphere gases created by thermochemical reactions and their use in TPE that are part of TPE as listed in Clause 4 and Clause 5, when used as intended and under the conditions foreseen by the manufacturer. This part of the EN 746 series covers: - pipework downstream of and including the manual isolating valve, - equipment for the generation of atmosphere gases, - additional equipment for the use of atmosphere gases in TPE, - safety devices, and - functional requirements for safety related control system for the generation and use of protective and reactive atmosphere gases. It applies to the supply of atmosphere gas, source gas, inert gas and process liquids to TPE and their removal from TPE, confined to equipment integrated in the TPE. This part of the EN 746 series also details the anticipated significant hazards associated with atmosphere gas systems and their use in TPE and specifies the appropriate preventative measures for the reduction or elimination of these hazards. The pressure hazard of the piping and components covered by this standard is within the maximum pressure/size relationship of group 1 as described in Annex C. This part of the EN 746 series: - specifies the requirements to be met to ensure the safety of persons and property during installation, commissioning, start up, operation, shutdown and maintenance, - does not cover the relevant risks involved in the flue gas ducting system when it is not considered a part of TPE, - is not applicable to utility supply upstream of the TPE main disconnects, - does not apply to TPE for semi-conductor devices, - does not apply to TPE with atmosphere, such as air and flue gas from an over stoichiometric combustion, - does not cover the decommissioning of the TPE, - does not cover vacuum furnaces, - does not cover blast furnaces, converters (in steel plants), boilers and equipment not covered under EN ISO 12100:2010. - does not deal with the hazard of noise which is covered in EN 746 1:1997+A1:2009, - is not applicable to generation and use of atmosphere gas in TPE and associated plant which is manufactured before the date of its publication, and - gives the necessary requirements for the information for use. A TPE designed according to this part of EN 746 series does not create any potentially explosive atmosphere in the area around the TPE and is not designed to be located in an area with a potentially explosive or hazardous atmosphere. This part of the EN 746 series deals with significant hazards which are described in Annex A. A table of typical protective and reactive gases is given in Annex B.

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases

KS B ISO 13579-2-2021 工业炉及相关加工设备 能量平衡测量和效率计算方法 第2部分：钢加热炉

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 2: Reheating furnaces for steel

KS B ISO 13579-4-2021 工业炉和相关加工设备 测量能量平衡和计算效率的方法 第4部分：具有保护性或反应性气氛的炉

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 4: Furnaces with protective or reactive atmosphere

KS B ISO 13579-1-2021 工业炉和相关加工设备 测量能量平衡和计算效率的方法 第1部分：通用方法

Industrial furnaces and associated processing equipment – Method of measuring energy balance and calculating efficiency – Part 1: General methodology

KS B ISO 13579-3-2021 工业炉及相关加工设备 能量平衡测量和效率计算方法 第3部分：间歇式铝熔炼炉

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 3: Batch-type aluminium melting furnaces

GSO ISO 13579-1:2021 工业炉和相关加工设备 测量能量平衡和计算效率的方法 第1部分：通用方法

ISO 13579-1:2013 specifies a general methodology for measuring energy balance and calculating the efficiency of the process involving industrial furnaces and associated processing equipment as designed by furnace manufacturers. This general methodology includes measurement methods, calculations (general calculation) and an energy balance evaluation report. ISO 13579-1:2013 is not applicable to any efficiencies related to the process itself outside of industrial furnaces and associated processing equipment.

Industrial furnaces and associated processing equipment — Method of measuring energy balance and calculating efficiency — Part 1: General methodology

FprEN 746-3-2021 工业热处理设备 第3部分：大气气体的产生和使用的安全要求

Industrial thermoprocessing equipment - Part 3: Safety requirements for the generation and use of atmosphere gases