ZH
RU
ES

Air particulate matter sampling basis

Air particulate matter sampling basis, Total:153 items.

In the international standard classification, Air particulate matter sampling basis involves: Air quality, Particle size analysis. Sieving, Occupational safety. Industrial hygiene, Vocabularies, Welding, brazing and soldering, Wastes, Analytical chemistry, Microbiology.

Association of German Mechanical Engineers, Air particulate matter sampling basis

VDI 2463 Blatt 7-2014 Particulate matter measurement - Determination of suspended particulate matter and gaseous chemical compounds in ambient air and indoor air - Active sampling via low-volume sampler (LVS)
VDI 2463 Blatt 8-2014 Particulate matter measurement - Determination of suspended particulate matter in ambient air and indoor air - Non-fractioning sampling system for low-volume samplers (LVS)
VDI 2119-2013 Ambient air measurements - Sampling of atmospheric particles > 2,5 ?m on an acceptor surface using the Sigma-2 passive sampler - Characterisation by optical microscopy and calculation of number settling rate and mass concentration
VDI 2267 Blatt 8-2000 Determination of suspended particles in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic absorption spectrometry (AAS) with cold vapour technique
VDI 3497 Blatt 4-1991 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulphate by ion chromatography using single-column-technique after aerosol sampling on PTFE-filters
VDI 3497 Blatt 3-1988 Determination of particulate anions in ambient air; analysis of chloride, nitrate, and sulfate by ion chromatography using suppressor technique after aerosol sampling on PTFE-filters
VDI 3868 Blatt 1-1994 Determination of total emission of metals, metalloids, and their compounds - Manual measurement in flowing, emitted gases - Sampling system for particulate and filter-passing matter
VDI 2267 Blatt 9-2002 Determination of suspended particulates matter in ambient air - Measurement of the mass concentration of mercury - Sampling by sorption as amalgam and determination by atomic fluorescense spectrometry (AFS) with cold vapour technique

Standard Association of Australia （SAA）, Air particulate matter sampling basis

AS/NZS 3580.9.3:2015 Methods for sampling and analysis of ambient air, Method 9.3: Determination of suspended particulate matter — Total suspended particulate matter (TSP) — High volume sampler gravimetric method
AS/NZS 3580.10.1:2016 Methods for sampling and analysis of ambient air, Method 10.1: Determination of particulate matter — Deposited matter — Gravimetric method
AS 3580.9.7:1990 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM(sub)10(/sub) dichotomous sampler - Gravimetric method
AS/NZS 3580.9.7:2009
AS 3580.9.10:2017 Methods for sampling and analysis of ambient air, Method 9.10: Determination of suspended particulate matter — PM 2. low volume sampler — Gravimetric method
AS 3580.9.9:2017 Methods for sampling and analysis of ambient air, Method 9.9: Determination of suspended particulate matter — PM 10 low volume sampler — Gravimetric method
AS 3853.1:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of airborne particles
AS/NZS 3580.9.15:2014
AS/NZS 3580.9.12:2022 Methods for sampling and analysis of ambient air, Method 9.12: Determination of suspended particulate matter — PM2.5 beta attenuation monitors
AS/NZS 3580.9.17:2018 Methods for sampling and analysis of ambient air, Method 9.17: Demonstration of equivalence for ambient particulate matter monitoring methods
AS/NZS 3580.9.11:2022 Methods for sampling and analysis of ambient air, Method 9.11: Determination of suspended particulate matter — PM10 beta attenuation monitors
AS 3853.2:2006 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator?s breathing zone - Sampling of gases
AS/NZS 3580.9.6:2015
AS/NZS 3580.10.2:2013
AS 3580.13.3:1993 Methods for sampling and analysis of ambient air Method 13.3: Determination of fluorides-Total gaseous and acid-soluble airborne particulate fluoride-Sodium acetate coated tube absorption
AS 3580.13.1:1993 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Automated, double paper tape sampling
AS 3580.13.2:1991 Methods for sampling and analysis of ambient air - Determination of fluorides - Gaseous and acid-soluble particulate fluorides - Manual, double filter paper sampling
AS 2365.7:2006 Methods for sampling and analysis of indoor air - Determination of total suspended particulate matter - Gravimetric method
AS/NZS 3580.13.2:2013
AS/NZS 3580.9.11:2008 Methods for sampling and analysis of ambient air - Determination of suspended particulate matter - PM10 beta attenuation monitors
AS/NZS 3580.9.12:2013
AS 3580.9.8:2001 Methods for sampling and analysis of ambient air Method 9.8: Determination of suspended particulate matter--PM continuous direct mass method using a tapered element oscillating microbalance analyser
AS/NZS 3580.9.13:2022 Methods for sampling and analysis of ambient air, Method 9.13: Determination of suspended particulate matter — PM2.5 continuous direct mass method using a tapered element oscillating microbalance monitor
AS/NZS 3580.9.14:2013
AS 3580.9.8:2022 Methods for sampling and analysis of ambient air, Method 9.8: Determination of suspended particulate matter — PM10 continuous direct mass method using a tapered element oscillating microbalance analyser

国家市场监督管理总局、中国国家标准化管理委员会, Air particulate matter sampling basis

GB/T 39990-2021 Particulate─Bioaerosol sampler─Technical specification

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Air particulate matter sampling basis

GB/T 38517-2020 Particulate—Bioaerosols sampling and analysis—General principles
GB/T 38517-2020(英文版) Particulate—Bioaerosols sampling and analysis—General principles
GB/T 16157-1996 The determination of particulates and sampling methods of gaseous pollutants emitted from exhaust gas of stationary source

International Organization for Standardization (ISO), Air particulate matter sampling basis

ISO/DIS 10882-1 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 1: Sampling of airborne particles
ISO/DTR 14644-21:2023 Cleanrooms and associated controlled environments — Part 21: Airborne particle sampling techniques
ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments — Part 21: Airborne particle sampling techniques
ISO 10882-1:2001 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles
ISO/DIS 10882-2 Health and safety in welding and allied processes — Sampling of airborne particles and gases in the operator's breathing zone — Part 2: Sampling of gases
ISO 15202-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 15202-1:2000 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1: Sampling
ISO 10882-2:2000 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases
ISO 23861:2022 Workplace air — Chemical agent present as a mixture of airborne particles and vapour — Requirements for evaluation of measuring procedures using samplers
ISO 15202-2:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
ISO 15202-2:2001 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 2: Sample preparation
ISO 15202-1:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
ISO 15202-2:2020 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation

German Institute for Standardization, Air particulate matter sampling basis

DIN EN ISO 10882-1:2012-01 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011); German version EN ISO 10882-1:2011
DIN EN ISO 10882-1:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023 / Note: Dat...
DIN EN ISO 13138:2012-04 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
DIN EN ISO 10882-1:2023 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2023); German and English version prEN ISO 10882-1:2023
DIN EN ISO 10882-2:2001-04 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000); German version EN ISO 10882-2:2000
DIN EN ISO 10882-2:2023-06 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023 / Note: Date of issue 20...
DIN ISO 2889 Beiblatt 2:2012-08 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 2: Assessment of the changes in the concentration of aerosol particles due to non-isokinetic sampling
DIN EN ISO 23861:2023-02 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022); German version EN ISO 23861:2022
DIN EN 13205-5:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces; German version EN 13205-5:2014
DIN ISO 2889 Beiblatt 1:2012-10 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN EN 13205-1:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements; German version EN 13205-1:2014
DIN EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
DIN EN 13205-2:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency; German version EN 13205-2:2014
DIN EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012); German version EN ISO 13138:2012
DIN EN 13205-6:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests; German version EN 13205-6:2014
DIN EN ISO 10882-2:2023 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO/DIS 10882-2:2023); German and English version prEN ISO 10882-2:2023
DIN ISO 2889 Bb.3:2015 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities; Supplement 3: Estimation of aerosol particle penetration and depositional losses in sample lines
DIN EN 13205-4:2014-09 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations; German version EN 13205-4:2014
DIN ISO 2889 Bb.1:2012 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities - Supplement 1: Distribution of activity via the diameter of aerosol particles
DIN ISO 2889 Beiblatt 3 Berichtigung 1:2021 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities; Supplement 3: Estimation of aerosol particle penetration and depositional losses in sample lines; Corrigendum 1

Professional Standard - Environmental Protection, Air particulate matter sampling basis

HJ 93-2013 Specifications and test procedures for PM<下标10> and PM<下标2.5> sampler
HJ 93-2013(XG1-2018) Ambient air particulate matter (PM10 and PM2.5) sampler technical requirements and detection methods "No. 1 Amendment"

AWS - American Welding Society, Air particulate matter sampling basis

F1.1-1985 METHOD FOR SAMPLING AIRBORNE PARTICULATES GENERATED BY WELDING AND ALLIED PROCESSES

Lithuanian Standards Office , Air particulate matter sampling basis

LST EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
LST EN ISO 10882-2:2002 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2000)

AENOR, Air particulate matter sampling basis

UNE-EN ISO 10882-1:2012 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011)
UNE-CEN/TR 13205-3:2015 IN Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
UNE-EN ISO 10882-2:2001 Health and safety in welding and allied processes. Sampling of airbone particles and gases in the operator's breathing zone. Part 2: Samplling of gases. (ISO 10882-2:2000).
UNE-EN 13205-5:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces
UNE-EN 13205-2:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency
UNE-EN 13205-1:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements
UNE-EN 13205-6:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
UNE-EN 13205-4:2015 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations

British Standards Institution (BSI), Air particulate matter sampling basis

23/30441434 DC BS EN ISO 10882-1. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 1. Sampling of airborne particles
PD ISO/TR 14644-21:2023 Cleanrooms and associated controlled environments. Airborne particle sampling techniques
BS ISO 15202-1:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sampling
BS ISO 15202-1:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sampling
BS EN ISO 23861:2022 Tracked Changes. Workplace air. Chemical agent present as a mixture of airborne particles and vapour. Requirements for evaluation of measuring procedures using samplers
BS PD CEN/TR 13205-3:2014 Workplace exposure. Assessment of sampler performance for measurement of airborne particle concentrations. Analysis of sampling efficiency data
23/30471670 DC BS EN ISO 10882-2. Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone - Part 2. Sampling of gases
21/30394853 DC BS EN ISO 23861. Workplace air. Chemical agent present as a mixture of airborne particles and vapours. Requirements for evaluation of measuring procedures using samplers
BS EN ISO 10882-1:2011 Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Sampling of airborne particles
19/30383008 DC BS ISO 15202-1. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
19/30383011 DC BS ISO 15202-2. Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation
BS ISO 11174:1997 Workplace air - Determination of particulate cadmium and cadmium compounds - Flame and electro-thermal atomic absorption spectrometric method
BS ISO 15202-2:2020 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Sample preparation
BS ISO 15202-2:2012 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Sample preparation

Association Francaise de Normalisation, Air particulate matter sampling basis

NF X43-261:1988 Qualité de l'air - Air des lieux de travail - Prélèvement à poste fixe et mesurage de la pollution particulaire totale.
NF EN 13205-5:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 5 : essais de performances des échantillonneurs d'aérosols, réa...
NF EN 13205-4:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 4 : essai de performances en laboratoire par comparaison des concen...
NF EN ISO 23861:2022 Air des lieux de travail - Agent chimique présent sous forme de mélange de particules en suspension dans l'air et de vapeur - Exigences d'évaluation des procédures de mesure utilisant des dispositifs de prélèvement
NF ISO 15202-1:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 1 : prélèvement d'échantillons
NF X43-259:1990 Qualité de l'air - Air des lieux de travail - Prélèvement individuel ou à poste fixe de la fraction alvéolaire de la pollution particulaire. Méthode de séparation par cyclone 10 mm.
NF EN 13205-1:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 1 : exigences générales
NF ISO 15202-2:2020 Air des lieux de travail - Détermination des métaux et métalloïdes dans les particules en suspension dans l'air par spectrométrie d'émission atomique avec plasma à couplage inductif - Partie 2 : préparation des échantillons
NF EN 13205-6:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 6 : essais de manipulation et de transport
FD X43-283-3*FD CEN/TR 13205-3:2014 Workplace exposure - Assessment of performance of instruments for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
NF EN 13205-2:2014 Exposition sur les lieux de travail - Évaluation des performances des dispositifs de prélèvement pour le mesurage des concentrations de particules en suspension dans l'air - Partie 2 : essai de performances en laboratoire par détermination par l'...
NF X43-265-1:2012 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1 : sampling.
NF X43-265-1*NF ISO 15202-1:2020 Workplace air - Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry - Part 1 : sampling

TH-TISI, Air particulate matter sampling basis

TIS 2574-2012 Airborne particulate matter sampling and analysis in workplace environment

European Committee for Standardization (CEN), Air particulate matter sampling basis

CEN/TS 15439:2006 Biomass gasification - Tar and particles in product gases - Sampling and analysis
CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN ISO 13138:2012 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO 13138:2012)
PD CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data
EN 13205-6:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests
EN ISO 23861:2022 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)
EN 13205-4:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations
prEN ISO 23861:2021 Workplace air - Chemical agent present as a mixture of airborne particles and vapours - Requirements for evaluation of measuring procedures using samplers (ISO/DIS 23861:2021)

Professional Standard - Agriculture, Air particulate matter sampling basis

空气和废气监测分析方法 7.2.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources Three-source Sample Collection Methods
空气和废气监测分析方法 7.2.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources—Classification of Particulate Matter Pollutio
空气和废气监测分析方法 7.2.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter Two Atmospheric Particulate Matter Emission Source Sample Collection Four-source Sample Processing Methods
GB/T 16157-1996(XG1-2018) "Determination of Particulate Matter in Exhaust from Stationary Pollution Sources and Sampling Methods of Gaseous Pollutants" Amendment No. 1
空气和废气监测分析方法 7.3.4-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 4 Sampling Time Sampling Period and Sampling Requirements
空气和废气监测分析方法 7.2.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulate Matter Chapter 2 Sample Collection of Atmospheric Particulate Matter Emission Sources 2 Other Classification Methods
空气和废气监测分析方法 7.3.2-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 2 Sampling Instrument Selection
空气和废气监测分析方法 7.3.5-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection 5 Sample Storage and Transportation
空气和废气监测分析方法 7.3.3-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Three Filter Membrane Selection
空气和废气监测分析方法 7.5.4-2003 Part Seven Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particles Chapter Five Particle Composition Spectrum Establishment Four Source and Receptor Composition Spectrum Data Evaluation
空气和废气监测分析方法 7.3.1-2003 Chapter 7 Chemical Mass Balance (CMB) Receptor Model and Its Application in Source Apportionment of Ambient Air Particulates Chapter 3 Environmental Receptor Sample Collection Point and Layout Principle

American Society for Testing and Materials (ASTM), Air particulate matter sampling basis

ASTM D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
ASTM D4096-91(1997)e1 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)
ASTM F318-78(1996) Standard Practice for Sampling Airborne Particulate Contamination in Clean Rooms for Handling Aerospace Fluids
ASTM D6831-02 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
ASTM D3267-91(2000)e1 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

Institute of Environmental Sciences and Technology, Air particulate matter sampling basis

IEST G-CC1004-1999 Sequential-Sampling Plan for Use in Classification of the Particulate Cleanliness of Air in Cleanrooms and Clean Zones

CEN - European Committee for Standardization, Air particulate matter sampling basis

PREN 13205-2010 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations

ES-UNE, Air particulate matter sampling basis

UNE-EN ISO 23861:2023 Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)

Society of Automotive Engineers (SAE), Air particulate matter sampling basis

SAE ARP6320A-2021 Procedure for the Continuous Sampling and Measurement of Non-Volatile Particulate Matter Emissions from Aircraft Turbine Engines

Korean Agency for Technology and Standards (KATS), Air particulate matter sampling basis

KS I ISO 15202-1:2006 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 1:Sampling
KS I ISO 15202-1:2014 Workplace air — Determination of metals and metalloids in Workplace air — Determination of metals and metalloids in emission spectrometry — Part 1: Sampling
KS I 2209-2008 Form, size and performance testing methods of filtration media for collecting airborne particulate matters
KS I ISO 15202-2:2008 Workplace air-Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry-Part 2:Sample preparation
KS I ISO 15202-2:2014 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation
KS I ISO 15202-1:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
KS I ISO 15202-2:2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation

RU-GOST R, Air particulate matter sampling basis

GOST R ISO 15202-1-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 1. Sampling
GOST R ISO 15202-2-2014 Workplace air. Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry. Part 2. Sample preparation

Japanese Industrial Standards Committee (JISC), Air particulate matter sampling basis

JIS K 0901:1991 Form, size and performance testing methods of filtration media for collecting airborne particulate matters

KR-KS, Air particulate matter sampling basis

KS I ISO 15202-1-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 1: Sampling
KS I ISO 15202-2-2019 Workplace air — Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma atomic emission spectrometry — Part 2: Sample preparation