ZH

RU

ES

Infrared Spectroscopy Test Standard

Infrared Spectroscopy Test Standard, Total:362 items.

In the international standard classification, Infrared Spectroscopy Test Standard involves: Analytical chemistry, Petroleum products in general, Fuels, Lubricants, industrial oils and related products, Rubber and plastics products, Optics and optical measurements, Rubber, Road engineering, Medical sciences and health care facilities in general, Plastics, Air quality, Products of the chemical industry, Paints and varnishes, Optoelectronics. Laser equipment, Water quality, Information sciences. Publishing, Metrology and measurement in general, Glass, Beverages, Milk and milk products, Coatings and related processes used in aerospace industry, Non-destructive testing, Materials for aerospace construction, Semiconducting materials, Road vehicle systems, Aerospace electric equipment and systems, On-board equipment and instruments, Medical equipment, Solar energy engineering, Photography, Protection against fire, Nuclear energy engineering, Raw materials for rubber and plastics, Non-ferrous metals, Thermodynamics and temperature measurements, Bridge construction, Burners. Boilers.


American Society for Testing and Materials (ASTM), Infrared Spectroscopy Test Standard

  • ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM E2224-18 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-19 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
  • ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D7678-11 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D3162-12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D7948-14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
  • ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
  • ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D5845-01(2006) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-95(2000)e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM D4053-98(2003) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D4053-98 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D7948-14 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
  • ASTM D7653-10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
  • ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7371-12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-16 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
  • ASTM D7678-17(2022) Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7678-17 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM E388-04(2015) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers
  • ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers Level Zero and Level One Tests
  • ASTM F1619-95(2000)e1 Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM E1421-99(2004) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7371-14 Standard Test Method for Determination of Biodiesel &40;Fatty Acid Methyl Esters&41; Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy &40;FTIR-ATR-PLS Method&41;
  • ASTM E1421-99(2015)e1 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E1021-15(2019) Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM E1021-15 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D7806-12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
  • ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM F2778-09(2015) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
  • ASTM D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D7371-07 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM D7418-20 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-12(2019) Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D5670-95(2004)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
  • ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
  • ASTM D5670-95(2000)e1 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D7844-20 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D3900-95(2000) Standard Test Methods for Rubber Raw-Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers)
  • ASTM D3900-95(2004)e1 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
  • ASTM D7844-18 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7844-12 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E2847-13e1 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM E2847-14 Standard Test Method for Calibration and Accuracy Verification of Wideband Infrared Thermometers
  • ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D5670-95(2023) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D7861-14 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM D3900-17 Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM E1944-98(2002) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1944-98 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1944-98(2007) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D5594-18 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D7844-21 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1944-98(2013) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM F1619-95(2000) Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM D8193-18 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
  • ASTM D3900-17(2021) Standard Test Methods for Rubber—Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D5594-18a Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D7861-14e1 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM F2381-10 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-88(2001) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E1021-06 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6342-12 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D5986-96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM E2529-06(2022) Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E2529-06e1 Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM D8148-17 Standard Test Method for Spectroscopic Determination of Haze in Fuels
  • ASTM D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
  • ASTM D5670-95(2019) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM D5670-95(2014) Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM F1864-98 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM D5986-96(2006) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D5986-96(2001) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)
  • ASTM D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
  • ASTM D5902-05(2015) Standard Test Method for Rubber&x2014;Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value
  • ASTM D7624-18 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D5594-98 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM D5594-98(2012) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
  • ASTM E2412-10 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels
  • ASTM E973-10 Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
  • ASTM F1864-05(2010) Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM D7575-11 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM E2412-04 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D5986-96 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared
  • ASTM D7414-18 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM D7414-21 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D3900-05 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D3900-05a Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry
  • ASTM D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7797-17 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method
  • ASTM D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7797-16 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
  • ASTM D7797-16a Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy&x2014;Rapid Screening Method
  • ASTM E2529-06 Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E2529-06(2014) Standard Guide for Testing the Resolution of a Raman Spectrometer
  • ASTM E1021-12 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
  • ASTM G130-95(2002) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-95 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-06 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument
  • ASTM D4788-03 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
  • ASTM E1933-99a(2010) Standard Test Methods for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers
  • ASTM D6248-98(2012)e1 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E204-98 Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM E204-98(2002) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM C1441-99 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM G130-12 Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
  • ASTM D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM D7575-10e1 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
  • ASTM E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers
  • ASTM C1205-20 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry

Military Standard of the People's Republic of China-General Armament Department, Infrared Spectroscopy Test Standard

German Institute for Standardization, Infrared Spectroscopy Test Standard

  • DIN 51820:2013-12 Testing of lubricants - Analysis of greases by infrared spectrometer - Recording and interpretation of an infrared spectrum / Note: Applies in conjunction with DIN 51451 (2004-09).
  • DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN 51453:2004-10 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN 10478:2003 Determination of ingredients of raw milk using infra-red spectrophotometry - Function test of the instruments
  • DIN 51433:1992 Testing of used oils; determination of the mineral oil content of used oil; infrared spectrometric method
  • DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN 51452:1994 Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry
  • DIN 51451:2020 Testing of petroleum products and related products - Analysis by infrared spectrometry - General working principles
  • DIN 51452:1994-01 Testing of lubricants; determination of the soot content in used Diesel engine oils; infrared spectrometry
  • DIN 51639-4:2020-11 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil content in used diesel motor oils using infrared spectrometry
  • DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
  • DIN EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN 51436:2009 Testing of petroleum products - Determination of the content of icing inhibitor in aviation turbine fuels - Infrared spectrometry
  • DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN 51436:1989 Testing of petroleum products; determination of the content of icing inhibitors in aviation turbine fuels; infrared spectrometry
  • DIN 51453:2004 Testing of lubricants - Determination of oxidation and nitration of used motor oils - Infrared spectrometric method
  • DIN 51639-4:2010 Testing of lubricants - Test methods - Part 4: Determination of vegetable oil fraction in used diesel motor oils using infrared spectrometry

Group Standards of the People's Republic of China, Infrared Spectroscopy Test Standard

  • T/CRIAC 0001-2019 Reagent for infrared spectrum detection - Tetrachloroethylene
  • T/JSJTQX 05-2019 Technical code for infrared spectrum identification of asphalt and determination of SBS content
  • T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis

Professional Standard - Aviation, Infrared Spectroscopy Test Standard

  • HB 5490-1991 Standard Spectrum Atlas of Infrared Spectrum of Aeronautical Non-metallic Materials Commodities

Inner Mongolia Provincial Standard of the People's Republic of China, Infrared Spectroscopy Test Standard

  • DB15/T 2494-2021 Highway asphalt infrared spectrum rapid detection test procedures

Hebei Provincial Standard of the People's Republic of China, Infrared Spectroscopy Test Standard

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

British Standards Institution (BSI), Infrared Spectroscopy Test Standard

  • BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • 21/30437727 DC BS EN 6042. Aerospace series. Organic compounds. Test method. Analysis by infrared spectroscopy
  • BS EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
  • 16/30287218 DC BS ISO 19021. Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry

American National Standards Institute (ANSI), Infrared Spectroscopy Test Standard

  • ANSI/ASTM D8290:2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

Korean Agency for Technology and Standards (KATS), Infrared Spectroscopy Test Standard

  • KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
  • KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
  • KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges

International Organization for Standardization (ISO), Infrared Spectroscopy Test Standard

  • ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO/TS 19021:2018 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy

交通运输部, Infrared Spectroscopy Test Standard

  • JT/T 1329-2020 Test method for modifier content of SBS modified asphalt by infrared spectroscopy

Association Francaise de Normalisation, Infrared Spectroscopy Test Standard

  • NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.
  • NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
  • NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • XP P92-021*XP ISO/TS 19021:2019 Test method for determination of gas concentrations in ISO 5659-2 using Fourier transform infrared spectroscopy
  • NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
  • NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
  • NF EN 1767:1999 Produits et systèmes pour la protection et la réparation des structures en béton - Méthodes d'essais - Analyse par spectrométrie infrarouge

European Committee for Standardization (CEN), Infrared Spectroscopy Test Standard

  • EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
  • EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

Lithuanian Standards Office , Infrared Spectroscopy Test Standard

  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • LST EN ISO 11151-2:2002 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
  • LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
  • LST EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)

Danish Standards Foundation, Infrared Spectroscopy Test Standard

  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range

AENOR, Infrared Spectroscopy Test Standard

  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

ES-UNE, Infrared Spectroscopy Test Standard

  • UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization, Infrared Spectroscopy Test Standard

  • PREN 6042-1995 Aerospace Series Organic Compounds Test Method Analysis by Infrared Spectroscopy (Edition P1)

国家市场监督管理总局、中国国家标准化管理委员会, Infrared Spectroscopy Test Standard

  • GB/T 37396.2-2019 Lasers and laser-related equipment—Standard optical components—Part 2: Components for the infrared spectral ranges
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Infrared Spectroscopy Test Standard

  • GB/T 7962.18-1987 Colourless optical glass test methods--Autocollimation test method for refractive index in the ultraviolet and infrared wave band
  • GB/T 24581-2009 Test method for low temperature FT-IR analysis of single crystal silicon for Ⅲ-Ⅴ impurities

Jiangsu Provincial Standard of the People's Republic of China, Infrared Spectroscopy Test Standard

  • DB32/T 4340-2022 Asphalt Infrared Spectroscopy Similarity Recognition and SBS Content Testing Procedures

RU-GOST R, Infrared Spectroscopy Test Standard

  • GOST 32338-2013 Gasolines. Determination of MTBE, ETBE, TAME, DIPE, methanol, ethanol and tert-butanol by method of infra-red spectroscopy
  • GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
  • GOST R 59422.2-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 2. Standard optical elements for laser equipment operating in the infrared spectral range. General technical requirements

Professional Standard - Electron, Infrared Spectroscopy Test Standard

  • SJ 2658.12-1986 Methods of measurement for semiconductor infrared diodes Methods of measurement for peak emission wavelength and spectral half width

CZ-CSN, Infrared Spectroscopy Test Standard

  • CSN 58 8785-1994 Methods of test for fats and oils Determination of content of isolated trans-unsaturated compounds by infrared spectroscopy

未注明发布机构, Infrared Spectroscopy Test Standard

  • BS 3985:2003(2008) Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
  • BS EN 238:1996(2004)*BS 2000-429:1996 Methods of test for petroleum and its products — Part 429 : Liquid petroleum products — Petrol — Determination of the benzene content by infrared spectrometry

Society of Automotive Engineers (SAE), Infrared Spectroscopy Test Standard

  • SAE J1796-1995 Spectral Transmission Test, Standard May 1995
  • SAE AS6165-2012 Interface Standard, Airborne EO/IR Systems, Maintenance and Test
  • SAE AS6171/9-2022 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods

GB-REG, Infrared Spectroscopy Test Standard

  • REG NASA-LLIS-0353--1994 Lessons Learned - Facility Failure During Testing of the Galileo Near Infrared Mapping Spectrometer (NIMS)

Professional Standard - Medicine, Infrared Spectroscopy Test Standard

  • YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Infrared Spectroscopy Test Standard

  • GB/T 35927-2018 Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy

SAE - SAE International, Infrared Spectroscopy Test Standard

  • SAE AS6171/9-2016 Techniques for Suspect/Counterfeit EEE Parts Detection by Fourier Transform Infrared Spectroscopy (FTIR) Test Methods

Yunnan Provincial Standard of the People's Republic of China, Infrared Spectroscopy Test Standard

  • DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Infrared Spectroscopy Test Standard

  • GJB 5384.14-2005 Test methods of performance for pyrotechnic composition Part 14: Determination of infrared radiance effective Infrared spectrum distribution method
  • GJB 6238.8-2008 Test method fo effect for special serial bomb. Part 8: Infrared radiation intensity for target flare of aerial target bomb. Spectral analytics method

PL-PKN, Infrared Spectroscopy Test Standard

  • PN Z04108-04-1988 Air purity protection Tests for oils Determination of li?uid phase of oil in work places by infrared absorption spectrophotometry

IN-BIS, Infrared Spectroscopy Test Standard





Copyright ©2007-2023 ANTPEDIA, All Rights Reserved