ZH

RU

ES

Benzene Standard Infrared Spectrum

Benzene Standard Infrared Spectrum, Total:317 items.

In the international standard classification, Benzene Standard Infrared Spectrum involves: Rubber, Fuels, Petroleum products in general, Medical sciences and health care facilities in general, Optics and optical measurements, Analytical chemistry, Lamps and related equipment, Paints and varnishes, Optoelectronics. Laser equipment, Products of the chemical industry, Lubricants, industrial oils and related products, Rubber and plastics products, Burners. Boilers, Raw materials for rubber and plastics, Organic chemicals, Electronic components in general, Plastics, Air quality, Aerospace electric equipment and systems, On-board equipment and instruments, Photography, Protection against crime, Beverages, Water quality, Information sciences. Publishing, Metrology and measurement in general, Insulating fluids, Medical equipment, Semiconducting materials, Coatings and related processes used in aerospace industry, Non-destructive testing.


Hebei Provincial Standard of the People's Republic of China, Benzene Standard Infrared Spectrum

  • DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Military Standard of the People's Republic of China-General Armament Department, Benzene Standard Infrared Spectrum

American Society for Testing and Materials (ASTM), Benzene Standard Infrared Spectrum

  • ASTM D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D4053-04 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM E2224-18 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-19 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D3414-98(2011)e1 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D6277-01 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-99 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-01(2006) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-07(2017) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D3414-98 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM D3414-98(2004) Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy
  • ASTM E2937-13 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
  • ASTM E2224-10 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2002) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(1997) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
  • ASTM E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E932-89(2013) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM D4053-98(2003) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D4053-98 Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
  • ASTM D6277-07 Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy
  • ASTM E2224-22 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E2224-23a Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM D3677-10(2015) Standard Test Methods for Rubber&x2014;Identification by Infrared Spectrophotometry
  • ASTM E2224-02 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E1252-98(2007) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2224-23ae1 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
  • ASTM E932-89(2007) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers
  • ASTM E2106-00(2011) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy
  • ASTM D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
  • ASTM D5986-96(2006) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D5986-96(2001) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy
  • ASTM D7057-23 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM D7057-18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM E1252-98 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2002) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)
  • ASTM E1252-98(2013)e1 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
  • ASTM D5986-96(2015) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM D5986-96 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared
  • ASTM D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform
  • ASTM E2310-04 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-infrared Spectroscopy
  • ASTM E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
  • ASTM D3677-10 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E2106-00 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM E2106-00(2006) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses
  • ASTM D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3162-21 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7360-16 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • ASTM E1754-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D6122-99 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-01 Standard Practice for Validation of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-09 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D5986-96(2011) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ASTM D6342-12(2017)e1 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy
  • ASTM D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM D3677-00(2004) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-00 Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM D3677-10(2019) Standard Test Methods for Rubber--Identification by Infrared Spectrophotometry
  • ASTM E1642-00(2005) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy
  • ASTM D3162-12(2020) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM E1915-05 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-99 Standard Test Method for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM E1915-01 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared Absorption Spectrometry
  • ASTM D6122-06 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM D6122-06e1 Standard Practice for Validation of the Performance of Multivariate Process Infrared Spectrophotometers
  • ASTM E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E1642-00(2010) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis
  • ASTM E1915-07a Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D3162-12 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D5576-00(2013) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM E1982-98(2007) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air
  • ASTM D7678-11 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM E29-90 Standard Practice for Using Digits in Test Data to Determine Conformance with Specifications
  • ASTM E29-93a(1999) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
  • ASTM E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
  • ASTM D7057-13 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)
  • ASTM E2193-16 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
  • ASTM D5477-02 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5477-95 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01(2016) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D7360-11 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration
  • ASTM D6348-98 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D5845-01(2006) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-95(2000)e1 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D5845-01 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy
  • ASTM D7418-07 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D6348-12 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D6348-12(2020) Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
  • ASTM D2668-07(2021) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di
  • ASTM D2124-99e1 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E1754-95(2001)e1 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-95 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM D2124-99(2004) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
  • ASTM E958-13 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM D3133-01 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM E1915-07 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials by Combustion Infrared-Absorption Spectrometry
  • ASTM D3162-94(2000)e1 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D3162-94(2005) Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)
  • ASTM D7418-12 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7948-20 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D3133-01(2005) Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D7948-14 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM D7948-14e1 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
  • ASTM E275-01 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM E275-93 Standard Practice for Describing and Measuring Performance of Ultraviolet, Visible, and Near-Infrared Spectrophotometers
  • ASTM D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D7418-20 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-12(2019) Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM D7653-10 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7418-22 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E958-93(1999) Standard Practice for Measuring Practical Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers
  • ASTM E1786-96 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-02 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-08 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1754-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
  • ASTM E204-98 Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM D7371-12 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM E2412-10(2018) Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D6348-03 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
  • ASTM D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM E204-98(2002) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM D7678-17(2022) Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7678-17 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
  • ASTM D7417-10 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
  • ASTM D3124-98(2003) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-98 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E2412-23 Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6342-12 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
  • ASTM D6122-21 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20a Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-20 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
  • ASTM E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm
  • ASTM F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM E1786-17 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
  • ASTM D5576-00 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectroscopy (FT-IR)
  • ASTM E1421-99 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers Level Zero and Level One Tests
  • ASTM D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
  • ASTM F1619-95(2000)e1 Standard Test Method for Measurement of Interstitial Oxygen Content of Silicon Wafers by Infrared Absorption Spectroscopy with p-Polarized Radiation Incident at the Brewster Angle
  • ASTM E1421-99(2004) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM E1421-99(2009) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
  • ASTM E204-98(2007) Standard Practices for Identification of Material by Infrared Absorption Spectroscopy, Using the ASTM Coded Band and Chemical Classification Index
  • ASTM E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests
  • ASTM D7371-14 Standard Test Method for Determination of Biodiesel &40;Fatty Acid Methyl Esters&41; Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy &40;FTIR-ATR-PLS Method&41;
  • ASTM E1421-99(2015)e1 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests
  • ASTM F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-16 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM F1864-05 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM D7806-12 Standard Test Method for Determination of the Fatty Acid Methyl Ester (FAME) Content of a Blend of Biodiesel and Petroleum-Based Diesel Fuel Oil Using Mid-Infrared Spectroscopy
  • ASTM D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
  • ASTM E925-83(1994)e1 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
  • ASTM F1864-98 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
  • ASTM E2193-04 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02a Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-02 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM E2193-08 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)
  • ASTM D5670-95(2009) Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry
  • ASTM E925-02 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM E925-09 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Slit Width does not Exceed 2 nm
  • ASTM D7371-07 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
  • ASTM D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
  • ASTM D6645-01 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D3133-96 Standard Test Method for Quantitative Determination of Cellulose Nitrate in Alkyd Modified Lacquers by Infrared Spectrophotometry
  • ASTM D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
  • ASTM D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
  • ASTM E925-09(2014) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

Sichuan Provincial Standard of the People's Republic of China, Benzene Standard Infrared Spectrum

  • DB51/T 1922-2014 Determination of Toluene Content in Gasoline by Infrared Spectroscopy
  • DB51/T 1919-2014 Determination of N-Methylaniline in Gasoline by Infrared Spectrometry

Association Francaise de Normalisation, Benzene Standard Infrared Spectrum

  • NF M07-064*NF EN 238:1996 Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry.
  • NF EN 238/A1:2005 Produits pétroliers liquides - Essence - Détermination de la teneur en benzène par spectrométrie infrarouge
  • NF EN 238:1996 Produits pétroliers liquides - Essence - Détermination de la teneur en benzène par spectrométrie infrarouge.
  • NF M07-064/A1*NF EN 238/A1:2005 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry.
  • NF X91-001:2000 Erythema reference action spectrum and standard erythema dose.
  • NF S10-111-2:2001 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range.
  • NF S10-111-2*NF EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2 : components for the infrared spectral range
  • NF S10-111-1*NF EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges
  • NF EN ISO 11151-2:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 2 : composants pour la plage spectrale infrarouge
  • NF T77-162:1988 Basic silicones for industrial use. Determination of ratios phenyl/silicium and phenyl/methyl. Near infrared spectrometric method.
  • NF EN ISO 11151-1:2015 Lasers et équipements associés aux lasers - Composants optiques standards - Partie 1 : composants pour les plages spectrales UV, visible et proche de l'infrarouge
  • NF S10-111-1:2001 Laser and laser-related equipment - Standard optical components - Part 1 : components for the UV, visible and near-infrared spectral ranges.
  • NF X43-065*NF EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • NF EN 14626:2012 Air ambiant - Méthode normalisée de mesurage de la concentration en monoxyde de carbone par spectroscopie à rayonnement infrarouge non dispersif
  • NF X43-374*NF EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method : non-dispersive infrared spectrometry
  • NF EN 15058:2017 Émissions de sources fixes - Détermination de la concentration massique de monoxyde de carbone - Méthode de référence normalisée : spectrométrie infrarouge non dispersive
  • NF X43-374:2006 Stationary source emissions - Determination of the mass concentration of carbon monoxide (CO) - Reference method : non-dispersive infrared spectrometry.
  • NF T52-134:1979 Plastics. Basic materials for polyurethanes. Determination of the ratio of 2,4 and 2,6 isomers in the toluylene diisocyanate by infra-red spectroscopy.

RU-GOST R, Benzene Standard Infrared Spectrum

  • GOST R 51930-2002 Motor and aviation gasolines. Determination of benzene by method of infrared spectroscopy
  • GOST 31871-2012 Motor and aviation gasolines. Determination of benzene by method of infrared spectroscopy
  • GOST R 59422.1-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 1. Standard optical elements for laser equipment operating in the ultraviolet, visible and near-infrared spectral ranges. General technical requirements
  • GOST R 59422.2-2021 Optics and photonics. Lasers and laser-related equipment. Standard optical elements. Part 2. Standard optical elements for laser equipment operating in the infrared spectral range. General technical requirements
  • GOST 32338-2013 Gasolines. Determination of MTBE, ETBE, TAME, DIPE, methanol, ethanol and tert-butanol by method of infra-red spectroscopy

Professional Standard - Aviation, Benzene Standard Infrared Spectrum

  • HB 5490-1991 Standard Spectrum Atlas of Infrared Spectrum of Aeronautical Non-metallic Materials Commodities

European Committee for Standardization (CEN), Benzene Standard Infrared Spectrum

  • prEN 238-1985 Liquid petroleum products; determination of the benzene content; infrared spectrometric method
  • EN ISO 11151-2:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 2: Components for the Infrared Spectral Range ISO 11151-2: 2000
  • EN ISO 11151-1:2000 Lasers and Laser-Related Equipment - Standard Optical Components - Part 1: Components for the UV, Visible and Near-Infrared Spectral Ranges ISO 11151-1: 2000
  • EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)
  • EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

International Organization for Standardization (ISO), Benzene Standard Infrared Spectrum

  • ISO 17166:1999 Erythema reference action spectrum and standard erythema dose
  • ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • ISO/CIE 17166:1999 Erythema reference cation spectrum and standard erythema dose
  • ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • ISO/TR 9372:1993 Plastics; basic materials for polyurethanes; determination of the amounts of 2,4- and 2,6-isomers in toluenediisocyanate by infrared spectroscopy

GOSTR, Benzene Standard Infrared Spectrum

  • GOST 34603-2019 Spark-ignition engine fuels. Determination of benzene by mid infrared spectroscopy method

German Institute for Standardization, Benzene Standard Infrared Spectrum

  • DIN EN 238:2004-04 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003
  • DIN EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000); German version EN ISO 11151-2:2000
  • DIN EN 238:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry; German version EN 238:1996 + A1:2003
  • DIN EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the ultraviolet, visible and near-infrared spectral range (ISO 11151-1:2000); German version EN ISO 11151-1:2000
  • DIN EN ISO 11151-2:2015-12 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN EN ISO 11151-1:2015-12 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 14626:2022-11 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German and English version prEN 14626:2022 / Note: Date of issue 2022-09-30*Intended as replacement for DIN EN 14626 (201...
  • DIN EN 14626:2012-12 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012 / Note: To be replaced by DIN EN 14626 (2022-11).
  • DIN EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015); German version EN ISO 11151-2:2015
  • DIN EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015); German version EN ISO 11151-1:2015
  • DIN EN 15058:2017-05 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017
  • DIN EN 14626:2012 Ambient air.Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy; German version EN 14626:2012
  • DIN EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry; German version EN 15058:2017

AENOR, Benzene Standard Infrared Spectrum

  • UNE-EN 238:1996 LIQUID PETROLEUM PRODUCTS. PETROL. DETERMIANTION OF THE BENZENE CONTENT BY INFRARED SPECTROMETRY.
  • UNE-EN 238/A1:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • UNE-EN 14626:2013 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • UNE-EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry

Danish Standards Foundation, Benzene Standard Infrared Spectrum

  • DS/EN 238:1997 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • DS/EN 238/A1:2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • DS/EN ISO 11151-1:2000 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges
  • DS/EN ISO 11151-2:2000 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range
  • DS/EN 14626:2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

Lithuanian Standards Office , Benzene Standard Infrared Spectrum

  • LST EN 238-1999 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • LST EN 238-1999/A1-2004 Liquid petroleum products - Petrol - Determination of the benzene content by infrared spectrometry
  • LST EN ISO 11151-2:2002 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2000)
  • LST EN ISO 11151-1:2002 Laser and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2000)
  • LST EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • LST EN 14626-2012 Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Benzene Standard Infrared Spectrum

  • GB/T 20150-2023 Erythema baseline action spectrum and standard erythema dose
  • GB/T 20150-2006 Erythema reference action spectrum and standard erythema dose
  • GB/T 21005-2007 UV erythema reference action spectrum,standard erythema dose and UV index

National Metrological Technical Specifications of the People's Republic of China, Benzene Standard Infrared Spectrum

  • JJF 1750-2019 Calibration Specification for Infrared Standard Filter
  • JJF 1319-2011 Calibration Specification for Fourier Transform Infrared Spectrometers

British Standards Institution (BSI), Benzene Standard Infrared Spectrum

  • BS EN ISO 11151-2:2000 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS EN ISO 11151-2:2015 Lasers and laser-related equipment. Standard optical components. Components for the infrared spectral range
  • BS ISO 17166:2000 Erythema reference action spectrum and standard erythema dose
  • BS EN ISO 11151-1:2000 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS EN ISO 11151-1:2015 Lasers and laser-related equipment. Standard optical components. Components for the UV, visible and near-infrared spectral ranges
  • BS 3985:2003 Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry
  • BS EN 238:1996 Methods of test for petroleum and its products. Liquid petroleum products. Petrol. Determination of the benzene content by infrared spectrometry
  • BS EN 14626:2012 Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 14626:2005 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
  • 22/30450999 DC BS EN 14626. Ambient air. Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
  • BS EN 15058:2017 Tracked Changes. Stationary source emissions. Determination of the mass concentration of carbon monoxide. Standard reference method: non-dispersive infrared spectrometry

Professional Standard - Petrochemical Industry, Benzene Standard Infrared Spectrum

  • SH/T 0797-2007 Standard test method for determination of benzene in spark-ignition engine fuels using mid infrared spectroscopy
  • SH/T 0792-2007 Standard test method for 2,6-di-tert-butyl-p-cresol and 2,6-di-tert-butyl phenol in electrical insulating oil by infrared absorption

Korean Agency for Technology and Standards (KATS), Benzene Standard Infrared Spectrum

  • KS B ISO 11151-2:2003 Lasers and laser-related equipment-Standard optical components-Part 2:Components for the infrared spectral range
  • KS B ISO 11151-2:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 2: Components for the infrared spectral range
  • KS B ISO 11151-2:2015 Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1:2013 Lasers and laser-related equipment ?; Standard optical components ?; Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2003 Lasers and laser-related equipment-Standard optical components-Part 1:Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-1:2015 Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges
  • KS B ISO 11151-2-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 2: Components for the infrared spectral range
  • KS B ISO 11151-1-2015(2020) Lasers and laser-related equipment ― Standard optical components ― Part 1: Components for the UV, visible and near-infrared spectral ranges

International Commission on Illumination (CIE), Benzene Standard Infrared Spectrum

  • CIE S 007/E-1998 Erythema Reference Action Spectrum and Standard Erythema Dose (ISO 17166: 1999)

ES-UNE, Benzene Standard Infrared Spectrum

  • UNE-EN ISO 11151-2:2015 Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015)
  • UNE-EN ISO 11151-1:2015 Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015)

国家市场监督管理总局、中国国家标准化管理委员会, Benzene Standard Infrared Spectrum

  • GB/T 37396.2-2019 Lasers and laser-related equipment—Standard optical components—Part 2: Components for the infrared spectral ranges
  • GB/T 37396.1-2019 Lasers and laser-related equipment—Standard optical components—Part 1: Components for the UV,visible and near-infrared spectral ranges
  • GB/T 40722.2-2021 Styrene-butadiene rubber(SBR)—Determination of the microstructure of solution-polymerized SBR—Part 2:FTIR with ATR method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Benzene Standard Infrared Spectrum

  • GB/T 35772-2017 Rapid detection of phthalate esters in polyvinyl chloride products—Infra-red spectrometric method
  • GB/T 35927-2018 Standard practice for identification of polymer layers or inclusions by fourier transform infrared microspectroscopy

SAE - SAE International, Benzene Standard Infrared Spectrum

Professional Standard - Commodity Inspection, Benzene Standard Infrared Spectrum

  • SN/T 2003.2-2006 Determination of polybrominatedbiphenyls and polybrominatedbiphenyl ether in electrical and electronic equipments - Part 2: Qualitative screening by infra-red spectrometric method
  • SN/T 3001-2011 Determination of oxygenates,benzene,toluence,C-aromatics and total aromatics in finished gasoline. Gas chromatography-fourier transform infrared spectroscopy

Professional Standard - Public Safety Standards, Benzene Standard Infrared Spectrum

  • GA/T 1518-2018 Capillary Electrophoresis, Fourier Transform Infrared Spectrometry
  • GA/T 2020-2023 Forensic sciences—Examination methods for 168 new psychoactive substances including 2-FA in suspected drugs-GC-MS,IR and LC

Professional Standard - Meteorology, Benzene Standard Infrared Spectrum

  • QX/T 206-2013 Calculation Method of Performance Index of Satellite Low Spectral Resolution Infrared Instrument

Society of Automotive Engineers (SAE), Benzene Standard Infrared Spectrum

  • SAE AS6129-2012 AS6129: Interface Standard, Airborne EO/IR Systems, Electrical
  • SAE AS6165-2012 Interface Standard, Airborne EO/IR Systems, Maintenance and Test

American National Standards Institute (ANSI), Benzene Standard Infrared Spectrum

  • ANSI/ASTM D5986:1997 Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
  • ANSI/ASTM D8290:2020 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

Group Standards of the People's Republic of China, Benzene Standard Infrared Spectrum

  • T/HBFIA 0020-2021 Rapid determination of indicators of Laobaigan-flavored fermented grains by near-infrared spectroscopic analysis
  • T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products

未注明发布机构, Benzene Standard Infrared Spectrum

  • BS EN 238:1996(2004)*BS 2000-429:1996 Methods of test for petroleum and its products — Part 429 : Liquid petroleum products — Petrol — Determination of the benzene content by infrared spectrometry
  • BS 3985:2003(2008) Haemiglobincyanide (cyanmethaemoglobin) preparation as a standard for spectrometric haemoglobinometry

Yunnan Provincial Standard of the People's Republic of China, Benzene Standard Infrared Spectrum

  • DB53/T 498-2013 Determination of main chemical constituents of tobacco and tobacco products Near-infrared diffuse reflectance spectrometry

Professional Standard - Medicine, Benzene Standard Infrared Spectrum

  • YY/T 0814-2010 tandard test method for evaluating trans-vinylene yield in irradiated ultra-high-molecular-weight polyethylene fabricated forms intended for surgical implants by infrared spectroscopy




Copyright ©2007-2023 ANTPEDIA, All Rights Reserved