ZH
RU
ES
when testing samples
when testing samples, Total:499 items.
In the international standard classification, when testing samples involves: Footwear, Products of the textile industry, Plastics, Construction materials, Edible oils and fats. Oilseeds, Coals, Electricity. Magnetism. Electrical and magnetic measurements, Materials for aerospace construction, Earthworks. Excavations. Foundation construction. Underground works, Products of the chemical industry, Testing of metals, Ferrous metals, Cellular materials, Products of non-ferrous metals, Leather technology, Corrosion of metals, Water quality, Road engineering, Non-metalliferous minerals, Pulps, Inorganic chemicals, Particle size analysis. Sieving, Fuels, Organic chemicals, Rubber, General methods of tests and analysis for food products, Analytical chemistry, Textile auxiliary materials, Animal feeding stuffs, Acoustics and acoustic measurements, Adhesives, Wastes, Road vehicles in general, Aids for disabled or handicapped persons, Paper products, Chipless working equipment, Vocabularies, Protection of and in buildings, Rubber and plastics products, Powder metallurgy, Agricultural machines, implements and equipment, Insulating materials, Fertilizers, Waxes, bituminous materials and other petroleum products, Construction equipment, Milk and milk products, Quality, Medical equipment, Soil quality. Pedology, Paints and varnishes, Fruits. Vegetables, Spices and condiments. Food additives, Bearings, Air quality, Iron and steel products, Meat, meat products and other animal produce, Metrology and measurement in general, Tobacco, tobacco products and related equipment, Protection against fire, Environmental testing, Non-destructive testing, Microbiology, Protection against dangerous goods.
British Standards Institution (BSI), when testing samples
- BS IEC 61747-40-5:2018 Liquid crystal display devices. Mechanical testing of display cover glass for mobile devices. Strength against dynamic impact by a sharp object with the specimen rigidly supported
- BS EN ISO 17709:2018 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces
- 22/30449570 DC Plastics. Test specimens
- BS 2782-9 Met 902A:1992 Methods of testing plastics. Sampling and test specimen preparation.. Compression moulding test specimens of thermosetting materials
- BS EN ISO 20753:2018 Tracked Changes. Plastics. Test specimens
- BS EN ISO 5667-16:2017 Tracked Changes. Water quality. Sampling. Guidance on biotesting of samples
- DD CEN/TS 15413:2006 Solid recovered fuels — Methods for the preparation of the test sample from the laboratory sample
- BS 5598-1:1978 Methods of sampling and test for halogenated hydrocarbons. Sampling of liquid products
- BS 4140-1:1986 Methods of test for aluminium oxide. Preparation and storage of test samples
- BS EN ISO 5089:2016 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- BS EN ISO 4044:2017 Tracked Changes. Leather. Chemical tests. Preparation of chemical test samples
- 22/30445078 DC BS EN ISO 9862. Geosynthetics. Sampling and preparation of test specimens
- BS ISO 13909-7:2002 Hard coal and coke - Mechanical sampling - Methods for determining the precision of sampling, sample preparation and testing
- BS EN ISO 377:2017 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
- BS EN ISO 377:2013 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing
- BS EN 13374:2013+A1:2018 Temporary edge protection systems. Product specification. Test methods
- BS EN ISO 21061:2021 Footwear. Chemical tests. General principles on the preparation of samples
- BS EN 12594:2014 Bitumen and bituminous binders. Preparation of test samples
- BS EN ISO 24223:2021 Cheese. Guidance on sample preparation for physical and chemical testing
- BS ISO 13909-4:2016 Tracked Changes. Hard coal and coke. Mechanical sampling. Coal. Preparation of test samples
- BS ISO 16055:2009 Tobacco and tobacco products. Monitor test piece. Requirements and use
- BS ISO 16055:2012 Tobacco and tobacco products. Monitor test piece. Requirements and use
- BS EN ISO 18314-4:2021 Analytical colorimetry. Metamerism index for pairs of samples for change of illuminant
- BS ISO 13909-7:2016 Tracked Changes. Hard coal and coke. Mechanical sampling. Methods for determining the precision of sampling, sample preparation and testing
- BS 5348-2:1989 Methods for sampling meat and meat products - Preparation of test samples for microbiological examination
German Institute for Standardization, when testing samples
- DIN EN ISO 105-J05:2007-07 Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) (ISO 105-J05:2007); German version EN ISO 105-J05:2007
- DIN EN ISO 17709:2018-12 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004); German version EN ISO 17709:2018
- DIN EN ISO 5089:2016-09 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977); German version EN ISO 5089:2016
- DIN EN ISO 17709:2018 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
- DIN EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
- DIN 51701-3:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 3: Sample preparation
- DIN EN ISO 664:2008-11 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); German version EN ISO 664:2008
- DIN 51701-5:2008-03 Testing of solid fuels - Sampling and sample preparation - Part 5: Testing of precision
- DIN 51701-2:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 2: Sampling
- DIN EN ISO 4044:2017-05 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017); German version EN ISO 4044:2017
- DIN EN ISO 5667-16:2019-03 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017); German version EN ISO 5667-16:2017
- DIN EN 12504-1:2017 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; German and English version prEN 12504-1:2017
- DIN EN 12504-1:2021-02 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression; German version EN 12504-1:2019 + AC:2020
- DIN EN ISO 661 Berichtigung 1:2007-02 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003); German version EN ISO 661:2005, Corrigenda to DIN EN ISO 661:2005-11; German version EN ISO 661:2005/AC:2006
- DIN EN ISO 661:2005-11 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003); German version EN ISO 661:2005
- DIN EN 1883:1998 Feather and down - Sampling in view of tests; German version EN 1883:1998
- DIN 51701-1:2007-12 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
- DIN 51701-4:2006-09 Testing of solid fuels - Sampling and sample preparation - Part 4: Equipment
- DIN EN 1067:2006-03 Adhesives - Examination and preparation of samples for testing; German version EN 1067:2005
- DIN 51701-1:2007 Testing of solid fuels - Sampling and sample preparation - Part 1: Definitions
- DIN EN ISO 5667-16:2019 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
- DIN 16906:2007 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN 16906:2015 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN 53534:2000 Testing of rubber - Determination of linear dimensions of test pieces and products
- DIN 16906:2015-01 Testing of plastic sheeting and plastic films - Sample and specimen - Preparation and conditioning
- DIN EN 13374:2022 Temporary edge protection systems - Product specification - Test methods; German and English version prEN 13374:2022
- DIN EN 13374:2019-06 Temporary edge protection systems - Product specification - Test methods; German version EN 13374:2013+A1:2018 / Note: To be replaced by DIN EN 13374 (2022-02).
- DIN EN 13374:2022-02 Temporary edge protection systems - Product specification - Test methods; German and English version prEN 13374:2022 / Note: Date of issue 2022-01-21*Intended as replacement for DIN EN 13374 (2019-06).
- DIN EN ISO 377:2017-09 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017); German version EN ISO 377:2017
- DIN EN 12594:2023 Bitumen and bituminous binders - Preparation of test samples; German and English version prEN 12594:2023
- DIN EN 12594:2023-04 Bitumen and bituminous binders - Preparation of test samples; German and English version prEN 12594:2023 / Note: Date of issue 2023-03-17*Intended as replacement for DIN EN 12594 (2015-01).
- DIN EN 12594:2015-01 Bitumen and bituminous binders - Preparation of test samples; German version EN 12594:2014
- DIN EN ISO 1927-2:2013-03 Monolithic (unshaped) refractory products - Part 2: Sampling for testing (ISO 1927-2:2012); German version EN ISO 1927-2:2012
- DIN EN ISO 9773:2004-02 Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998 + Amd. 1:2003); German version EN ISO 9773:1998 + A1:2003 / Note: To be replaced by DIN EN ISO 9773 (2011-04).
- DIN EN ISO 16000-11:2006-06 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); German version EN ISO 16000-11:2006
- DIN EN ISO 10724-1:2002-04 Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens (ISO 10724-1:1998); German version EN ISO 10724-1:2001
- DIN EN ISO 293:2023-06 Plastics - Compression moulding of test specimens of thermoplastic materials (ISO 293:2023); German version EN ISO 293:2023
- DIN EN ISO 2419:2012-05 Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012); German version EN ISO 2419:2012
- DIN EN ISO 295:2004-05 Plastics - Compression moulding of test specimens of thermosetting materials (ISO 295:2004); German version EN ISO 295:2004
- DIN EN ISO 24223:2021 Cheese - Guidance on sample preparation for physical and chemical testing (ISO/DIS 24223:2021); German and English version prEN ISO 24223:2021
- DIN 53442:1990-09 Flexural fatique testing of plastics using flat specimens
- DIN 12835:2003 Apparatus for dairy analysis - Sample bottles for milk
- DIN EN 60068-2-30:2006-06 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (IEC 60068-2-30:2005); German version EN 60068-2-30:2005 / Note: DIN EN 60068-2-30 (2000-02) remains valid alongside this standard until 2008-11-01.
- DIN EN ISO 16000-11:2006 Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006); English version of DIN EN ISO 16000-11:2006-06
- DIN EN ISO 29768:2022-12 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022); German version EN ISO 29768:2022
- DIN EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008); English version of DIN EN ISO 664:2008-11
- DIN ISO 11093-2:1998-03 Paper and board - Testing of cores - Part 2: Conditioning of test samples (ISO 11093-2:1994)
Korean Agency for Technology and Standards (KATS), when testing samples
- KS M ISO 17709-2005(2020) Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces
- KS M ISO 17709:2005 Footwear－Sampling location, preparation and duration of conditioning of samples and test pieces
- KS H ISO 356-2014(2019) Essential oils — Preparation of test samples
- KS M ISO 16012-2014(2019) Plastics — Determination of linear dimensions of test specimens
- KS F 2553-2017(2022) Methods for samples of aggregate to testing size
- KS M ISO 11093-2:2018 Paper and board — Testing of cores — Part 2: Conditioning of test samples
- KS E ISO 13909-8:2005 Hard coal and coke－Mechanical sampling－Part 8：Methods of testing for bias
- KS E ISO 13909-7:2005 Hard coal and coke－Mechanical sampling－Part 7：Methods for determining the precision of sampling, sample preparation and testing
- KS F 2301-1995 Practice for preparing disturbed soil samples for soil testing
- KS F 2301-2015 Practice for preparing disturbed soil samples for soil testing
- KS K ISO 5089:2007 Textiles-Preparation of laboratory test samples and test specimens for chemical testing
- KS K ISO 5089:2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS K ISO 5089:2014 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS M ISO 739:2019 Sodium carbonate for industrial use — Preparation and storage of test samples
General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, when testing samples
- GB/T 22050-2008 Footwear.Sampling location,preparation and duration of conditioning of samples and test pieces
- GB/T 5455-2014(英文版) "Textiles—Burning behaviour—Determination of damaged length,afterglow time and afterflame time of vertically oriented specimens"
- GB/T 10629-2009 Textiles.Preparation of laboratory test samples and test specimens for chemical testing
- GB/T 10629-1989 Textiles--Proparation of laboratory test samples and test specimens for chemical testing
- GB/T 17783-1999 Rubber, vulcanized--Preparation of samples and test pieces--Chemical tests
- GB/T 2407-2008 Plastics.Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod
- GB/T 2941-1991 Rubber-Standard temperatures,humidities and times for the conditioning environmental and testing of test pieces
- GB/T 19495.7-2004 Detection of genetically modified organisms and derived products. Methods for sampling and sample preparation
- GB/T 21579-2008 Dangerous goods.Test method of time/pressure
Association Francaise de Normalisation, when testing samples
- NF G62-800:2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces.
- NF EN ISO 9773/A1:2004 Plastiques - Détermination du comportement au feu d'éprouvettes minces verticales souples au contact d'une petite flamme comme source d'allumage - Amendement 1 : éprouvettes
- NF EN ISO 17709:2018 Chaussures - Localisation de l'échantillonnage, préparation et durée de conditionnement des échantillons et éprouvettes
- NF G06-001*NF EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- NF G62-126*NF EN ISO 17709:2018 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- NF EN ISO 664:2008 Graines oléagineuses - Réduction de l'échantillon pour laboratoire en échantillon pour essai
- NF G07-134:1984 Textiles. Testing of fabrics. Determination of resistance to fraying during washing using test pieces with different types of seams.
- NF EN ISO 5089:2016 Textiles - Préparation des échantillons réduits de laboratoire et des éprouvettes en vue des essais chimiques
- NF ISO 356:1997 Huiles essentielles - Préparation des échantillons pour essai
- NF ISO 5502:1993 Tourteaux de graines oléagineuses - Préparation des échantillons pour essai
- NF V03-009-2:2002 Produits alimentaires - Mesure de la radioactivité dans les denrées alimentaires - Partie 2 : guide pour la préparation des échantillons de denrées alimentaires - Obtention d'un échantillon pour essai
- NF P94-078:1997 Sols : reconnaissance et essais - Indice CBR après immersion. Indice CBR immédiat. Indice Portant Immédiat - Mesure sur échantillon compacté dans le moule CBR.
- NF EN ISO 4044:2017 Cuir - Essais chimiques - Préparation des échantillons pour essais chimiques
- NF T90-511-16*NF EN ISO 5667-16:2017 Water quality - Sampling - Part 16 : guidance on biotesting of samples
- NF EN 13374+A1:2018 Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'éssai
- NF EN 13374/IN1:2018 Garde-corps périphériques temporaires - Spécification du produit - Méthodes d'éssai
- NF V03-902:1995 Oilseeds. Reduction of laboratory sample to test sample.
- NF EN 1067:2006 Adhésifs - Examen et préparation des échantillons pour essais
- NF EN 13459:2012 Produits de marquage routier - Échantillonnage sur stock et essais
- XP Q35-002*XP ISO 11093-2:1995 Paper and board. Testing of cores. Part 2 : conditioning of test samples.
- NF ISO 13909-4:2005 Houille et coke - Échantillonnage mécanique - Partie 4 : charbon - Préparation des échantillons pour essai
- NF EN ISO 4884:2019 Métaux-durs - Échantillonnage et essais des poudres au moyen d'éprouvettes frittées
- NF V03-902*NF EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- NF A03-112:2013 Steel and steel products - Location and preparation of samples and test pieces for mechanical testing
- NF EN ISO 1110:2019 Plastiques - Polyamides - Conditionnement accéléré d'éprouvettes
- XP ISO 11093-2:1995 Papier et carton - Essais des mandrins - Partie 2 : conditionnement des échantillons pour essai.
- NF ISO 13909-6:2005 Houille et coke - Échantillonnage mécanique - Partie 6 : Coke - Préparation des échantillons pour essai
- NF M07-077-2:1997 Produits pétroliers liquides - Échantillonnage de carburant au pistolet de distribution - Partie 2 : échantillonnage de grand volume, à un instant donné.
- NF T51-122:1988 Plastics. Determination of tensile properties by use of small specimens.
- NF EN ISO 21061:2021 Chaussures - Essais chimiques - Principes généraux relatifs à la préparation des échantillons
- NF EN ISO 661:2005 Corps gras d'origines animale et végétale - Préparation de l'échantillon pour essai
- NF EN 12594:2014 Bitumes et liants bitumineux - Préparation des échantillons d'essai
- NF ISO 2723:1993 Émaux vitrifiés - Émaux vitrifiés pour tôle d'acier - Fabrication des échantillons pour essai.
- NF EN ISO 1513:2010 Peintures et vernis - Examen et préparation des échantillons pour essai
- NF EN ISO 24223:2021 Fromage - Lignes directrices pour la préparation des échantillons en vue des essais physiques et chimiques
- NF EN 60068-2-30:2006 Essais d'environnement - Partie 2-30 : essais - Essai Db : essai cyclique de chaleur humide (cycle de 12 h + 12 h)
- NF A03-112:1997 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing.
- NF EN ISO 16000-11:2006 Air intérieur - Partie 11 : dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai
- NF ISO 13909-7:2005 Houille et coke - Échantillonnage mécanique - Partie 7 : méthodes pour la détermination de la fidélité de l'échantillonnage, de la préparation de l'échantillon et de l'essai
- NF P15-471-7*NF EN 196-7:2008 Methods of testing cements - Part 7 : methods of taking and preparing samples of cement.
- NF EN ISO 9163:2005 Verres textiles - Stratifils - Fabrication d'éprouvettes et essai de traction sur stratifil imprégné
- NF EN 13880-6:2019 Produits de scellement de joints appliqués à chaud - Partie 6 : méthode d'essai pour la préparation des échantillons destinés à l'essai
- NF EN ISO 293:2023 Plastiques - Moulage par compression des éprouvettes en matières thermoplastiques
- NF X43-404-11*NF EN ISO 16000-11:2006 Indoor air - Part 11 : determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens
- NF A01-010:1971 Aluminium and aluminium alloys. Copper and copper alloys. Samples, specimens and test pieces.
- NF EN ISO 10724-1:2002 Plastiques - Moulage par injection d'éprouvettes en compositions de poudre à mouler (PMC) thermodurcissables - Partie 1 : principes généraux et moulage d'éprouvettes à usages multiples
- NF V18-091:1982 Animal feeding stuffs. Preparation of test samples.
- NF X30-455:2006 Characterization of waste - Preparation of test portions from the laboratory sample.
- NF T51-358*NF EN ISO 1600:1999 Plastics. Cellulose acetate. Determination of light absorption on moulded specimens produced using different periods of heating.
CEN - European Committee for Standardization, when testing samples
- EN ISO 17709:2018 Footwear - Sampling location@ preparation and duration of conditioning of samples and test pieces
- PD CEN/TS 15413:2006 Solid recovered fuels Methods for the preparation of the test sample from the laboratory sample
International Organization for Standardization (ISO), when testing samples
- ISO 17709:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- ISO 2818:2018 Plastics — Preparation of test specimens by machining
- ISO/FDIS 16000-11:2023 Indoor air — Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens
- ISO 16012:2015 Plastics - Determination of linear dimensions of test specimens
- ISO 16012:2004 Plastics - Determination of linear dimensions of test specimens
- ISO 687:1974 Coke; Determination of moisture in the analysis sample
- ISO 5089:1977 Textiles; Preparation of laboratory test samples and test specimens for chemical testing
- ISO/DIS 13909-4:1976 Coal and coke — Mechanical sampling — Part 4: Coal — Preparation of test samples
- ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- ISO 4648:1978 Rubber, vulcanized — Determination of dimensions of test pieces and products for test purposes
- ISO/DIS 13909-6:1976 Coal and coke — Mechanical sampling — Part 6: Coke — Preparation of test samples
- ISO 377-1:1989 Selection and preparation of samples and test pieces of wrought steels; part 1: samples and test pieces for mechanical test
- ISO 377:1985 Wrought steel — Selection and preparation of samples and test pieces
- ISO 24223:2021 | IDF 253:2021 Cheese — Guidance on sample preparation for physical and chemical testing
- ISO 3100-1:1975 Meat and meat products — Sampling — Part 1: Taking primary samples
- ISO 3100-1:1991 Meat and meat products; sampling and preparation of test samples; part 1: sampling
- ISO/DIS 13909-7:1976 Coal and coke — Mechanical sampling — Part 7: Methods for determining the precision of sampling, sample preparation and testing
- ISO 29768:2022 Thermal insulating products for building applications — Determination of linear dimensions of test specimens
- ISO/DIS 687:2023 Coke — Determination of moisture in the general analysis test sample
- ISO 2418:2023|IULTCS/IUP 2 Leather — Chemical, physical, mechanical and fastness tests — Position and preparation of specimens for testing
Lithuanian Standards Office , when testing samples
- LST ISO 5089:1996 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- LST EN 13400-2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- LST EN 13400-2002/AC-2005 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- LST EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- LST EN 15413-2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- LST EN 12504-1-2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- LST EN 12504-1/AC-2021 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- LST EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)
- LST EN 1067-2006 Adhesives - Examination and preparation of samples for testing
- LST EN ISO 5667-16:2000 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:1998)
- LST EN 13374-2004 Temporary edge protection systems - Product specification, test methods
- LST EN ISO 661:2005 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003)
- LST EN ISO 661:2005/AC:2007 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003)
- LST EN 12594-2007 Bitumen and bituminous binders - Preparation of test samples
- LST ISO 5502:2004 Oilseed residues. Preparation of test samples (idt ISO 5502:1992)
- LST EN 12085-1999 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- LST EN 60068-2-30-2006 Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
RU-GOST R, when testing samples
- GOST R ISO 5089-1999 Textiles. Preparation of laboratory test samples and test specimens for chemical testing
- GOST 28106-1989 Copper cathodes. Sampling and preparation of samples and test pieces for determination of electrical resistivity
- GOST 8756.0-1970 Canned food products. Sampling and preparation of samples for test
- GOST 16783-1971 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
- GOST 16783-2017 Plastics. Method of determining the brittleness temperature at squeezing the specimen folded up as a loop
- GOST R ISO 10328-2-1998 Prosthetics. Structural testing of lower-limb prostheses. Part 2. Test samples
- GOST 2189-1978 Foundry sands. Reception rules. Methods of sampling and sample preparation for testing
- GOST 7564-1997 Rolled products. General rules of sampling, rough specimens and test pieces selection for mechanical and technological testing
- GOST 7564-1973 Steel. General rules of samples, blanks and test pieces for mechanical and technological tests
- GOST 3622-1968 Milk and milk products. Sampling and preparation of samples for testing
- GOST 16493-1970 Product quality. Acceptance statistical inspection by attributes when the acceptable number of defectives in sample equals 0
- GOST 26324-1984 Canned fruit pulp. Sample desulphurization for organoleptic tests
- GOST 28106-2015 Copper cathodes. Sampling and preparation of samples and pieces for determination of electrical resistivity
- GOST ISO 356-2014 Essential oils. Preparation of test samples
- GOST ISO 13909-7-2013 Hard coal and coke. Mechanical sampling. Part 7. Methods for determining the precision of sampling, sample preparation and testing
- GOST 30630.1.8-2002 Test methods for resistance to environmental factors of machines, instruments and other articles. Time-history vibration tests
Danish Standards Foundation, when testing samples
- DS/EN 13400/AC:2004 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- DS/EN 13400:2002 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- DS/EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
- DS/EN ISO 5667-16:1999 Water quality - Sampling - Part 16: Guidance on biotesting of samples
- DS/EN 15413:2011 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- DS/EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- DS/EN 12504-1:2020 Testing concrete in structures – Part 1: Cored specimens – Taking, examining and testing in compression
- DS/EN 1067:2006 Adhesives - Examination and preparation of samples for testing
- DS/EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
- DS/EN 12594:2007 Bitumen and bituminous binders - Preparation of test samples
- DS/EN ISO 1513:2010 Paints and varnishes - Examination and preparation of test samples
- DS/EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- DS/EN 60068-2-30:2006 Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- DS/ISO 471:1985 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
Indonesia Standards, when testing samples
- SNI ISO 17709:2011 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- SNI 13-6717-2002 Manual for preparing test speciment from aggregate samples
- SNI 01-3475-1994 Coal, Preparation of sample for analysis and testing in laboratories and determination of free moisture content
- SNI 08-4419-1997 Method for sampling of geotextiles for testing
- SNI ISO 4044:2013 Leather-Chemical tests-Preparation of chemical test samples
- SNI 07-0660-1989 Corrosion test specimens, Method of preparation, cleaning and evaluation
- SNI 03-6838-2002 Manual for test specimen preparation - compaction of asphalt mixture sample using a gyratory compactor
- SNI 13-3607-1994 Phosphate deposit sample, Test methods for P2O5 carbon dioxide by spectrophotometer
- SNI 14-0489-1989 Preparation of pulp sheet for physical test
- SNI 13-3476-1994 Coal, Determination of total moisture content of sample
- SNI 13-3477-1994 Coal, Determination of moisture content of sample in dried air
- SNI 03-2485-1991 Stones test specimens, Laboratory test method for ultrasonic quick spreading and elastic constant
- SNI 7697-2011
AENOR, when testing samples
- UNE-EN 13400:2002 Footwear. Sampling location, preparation and duration of conditioning of samples and test pieces.
- UNE-EN ISO 5089:2017 Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977)
- UNE 84152:2000 Essential oils. Preparation of test samples.
- UNE 103100:1995 SAMPLE PREPARATION FOR SOIL TESTS.
- UNE-EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample (ISO 664:2008)
- UNE 40398:1984 METAMERIM INDEX OF SAMPLES COUPLES WHEN THE ILLUMINENT CHANGE
- UNE-EN 15413:2012 Solid recovered fuels - Methods for the preparation of the test sample from the laboratory sample
- UNE-EN 12504-1:2009 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- UNE 28017-6:1961 OBTETION OF TEST SAMPLES IN AIRCRAFT FABRICS.
- UNE-EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)
- UNE-EN 1067:2006 Adhesives - Examination and preparation of samples for testing
- UNE-EN ISO 5667-16:2017 Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017)
- UNE 30003:1956 CHEMICAL PRODUCTS. ANALYSIS REAGENTS. SPECIMENS FOR COMPARISON TESTS.
- UNE-EN 13374:2013 Temporary edge protection systems - Product specification - Test methods
- UNE-EN ISO 661:2006 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003)
- UNE-EN 12594:2015 Bitumen and bituminous binders - Preparation of test samples
- UNE 53551-2:1991 RUBBER VULCANIZED. PREPARATION OF SAMPLES AND TEST PIECES. PART 2: CHEMICAL TESTS
- UNE 22333:1990 COAL DUST EXPLOSIBILITY. METHOD FOR SAMPLE PREPARATION AND PRELIMINARY TEST
- UNE 56528:1978 CHARACTERISTICS PHYSICAL-MECHANICAL OF WOODS. PREPARATION OF TEST SPECIMENS.
- UNE-EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
ES-UNE, when testing samples
- UNE-EN ISO 17709:2019 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces (ISO 17709:2004)
- UNE-EN ISO 4044:2018 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2017)
- UNE-EN 12504-1:2020/AC:2021 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- UNE-EN 12504-1:2020 Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression
- UNE-EN ISO 661:2006/AC:2007 Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003)
- UNE-ISO 11093-2:2015 Paper and board. Testing of cores. Part 2: Conditioning of test samples
- UNE-EN 13374:2013+A1:2019 Temporary edge protection systems - Product specification - Test methods
- UNE-EN ISO 24223:2022 Cheese - Guidance on sample preparation for physical and chemical testing (ISO 24223:2021)
- UNE-EN ISO 21061:2022 Footwear - Chemical tests - General principles on the preparation of samples (ISO 21061:2021)
- UNE-EN ISO 1927-2:2012 Monolithic (unshaped) refractory products - Part 2: Sampling for testing (ISO 1927-2:2012) (Endorsed by AENOR in January of 2013.)
ES-AENOR, when testing samples
PL-PKN, when testing samples
- PN C04288-02-1987 Technical fats Methods for testing Sampling and prcparation of samples
- PN C87007-05-1993 Calcium fertilizers Sampling and sample preparation for testing
- PN C04224-1993 Rubber. Standard temperatures, humidities and times for the conditioning and testing of test pieces
- PN C87006-08-1992 Calcium-magnesium fertilizers Sampling and sample preparation for testing
- PN C04277-1993 Rubber, vulcanized. Preparation of samples and test pieces. Physical test
- PN C04288-03-1987 Technical fats Methods for testing Preparation of samples for test
- PN C89286-04-1989 Polyethylene Iow densffy Sampling and sample preparation for testing
- PN BN 6093-14-1966
- PN C84090-1970 Anhydri?e Sampling and methods of ?es?ing Przedmiotem normy s? metody pobierania próbek oraz metody badań anhydrytu w kawa?kach oraz anhydrytu mielonego, zwanego dalej m?czk? anhydrytow?.
- PN-EN 12504-1-2019-08/AC-2021-01 E Testing concrete in structures -- Part 1: Cored specimens -- Taking, examining and testing in compression
- PN-EN 12504-1-2019-08/AC-2021-01 P Testing concrete in structures -- Part 1: Cored specimens -- Taking, examining and testing in compression
- PN-EN 12504-1-2019-08 P Testing concrete in structures -- Part 1: Cored specimens -- Taking, examining and testing in compression
- PN C83604-04-1990 Fire extinguishing Fire extinguishings halons Sampling and sample preparation for testing
- PN C99460-09-1986 Sampling of photographic light sensitive materials for testing Guide sampling of aerofilms
- PN E04410-15-1986 Electroinsulating varnishes Test methods Samples preparation
- PN C04860-03-1990 ?on exchange resins Testing methods Samples preparation
- PN C82055-08-1990 Test methods of pressed carbon products Determination of resistivity on samples
- PN A75101-09-1990 Fruit and vegetable products Preparation of samples and testingmethods Determination of ethanol content
- PN H87903-1972 Irwestigations o? copper alloys castings Preparation and sampling ot ?es? pieces for microscopis examinations
- PN P22101-1992 Leather Preparation of laboratory samples for tests
- PN P50069-1974 Half-products of the paper industry Preparation of test samples for determination of optical proprieties
RO-ASRO, when testing samples
American National Standards Institute （ANSI), when testing samples
CZ-CSN, when testing samples
The American Road & Transportation Builders Association, when testing samples
- AASHTO T 226-1990 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
- AASHTO T 243M_T 243-2007 Standard Method of Test for Sampling Procedure for Impact Testing of Structural Steel
- AASHTO T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- AASHTO HM-2021 PT III-2021 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 3: PROVISIONAL STANDARDS (41st Edition)
- AASHTO HM-2021 PT II-2021 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 2: TEST METHODS (41st Edition)
- AASHTO HM-2020 PT II-2021 STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 2: TEST METHODS (41ST EDITION)
American Society for Testing and Materials (ASTM), when testing samples
- ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ASTM F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
- ASTM D7278-06 Standard Guide for Prediction of Analyzer Sample System Lag Times
- ASTM D7278-21 Standard Guide for Prediction of Analyzer Sample System Lag Times
- ASTM E423-71(2002) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM E423-71(1996)e1 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM D2664-95a Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
- ASTM D2664-04 Standard Test Method for Triaxial Compressive Strength of Undrained Rock Core Specimens Without Pore Pressure Measurements
- ASTM D1813-13(2017) Standard Test Method for Measuring Thickness of Leather Test Specimens
- ASTM C1799/C1799M-19 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation
- ASTM D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2010) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM D2347-00(2015) Standard Test Method for Measuring Area of Leather Test Specimens
- ASTM C561-91(2000) Standard Test Method for Ash in a Graphite Sample
- ASTM E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
- ASTM D4271-88(2001) Standard Practice for Writing Statements on Sampling in Test Methods for Textiles
- ASTM E795-05(2012) Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM E82-91(2001) Standard Test Method for Determining the Orientation of a Metal Crystal
- ASTM E829-94 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
- ASTM E795-00 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- ASTM C561-91(2010)e1 Standard Test Method for Ash in a Graphite Sample
- ASTM D4427-92(2007) Standard Classification of Peat Samples by Laboratory Testing
- ASTM C562-91(2010)e1 Standard Test Method for Moisture in a Graphite Sample
- ASTM B925-08 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
- ASTM D4427-92(1997) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D4427-13(2017) Standard Classification of Peat Samples by Laboratory Testing
- ASTM D4427-18 Standard Classification of Peat Samples by Laboratory Testing
- ASTM C561-16 Standard Test Method for Ash in a Graphite Sample
- ASTM C1140/C1140M-11(2019) Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
- ASTM D1071-83(1998) Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1071-83(1998)e1 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- ASTM D3376-88(2000) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
- ASTM E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- ASTM D5373-21 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke
IN-BIS, when testing samples
UY-UNIT, when testing samples
European Committee for Standardization (CEN), when testing samples
- EN ISO 5089:2016 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- EN 13400:2001 Footwear - Sampling location, preparation and duration of conditioning of samples and test pieces
- CEN EN ISO 4044:2008 Leather - Chemical tests - Preparation of chemical test samples (ISO 4044:2008)
- EN 1067:2005 Adhesives - Examination and preparation of samples for testing
- EN 1067:1997 Adhesives - Examination and Preparation of Samples for Testing
- EN ISO 4044:2017 Leather - Chemical tests - Preparation of chemical test samples
- EN 10045-1:1990 Metal Products, Mechanical Tests, Charpy Impact Tests, Test Specimens, Testing Conditions
- EN 12594:2014 Bitumen and bituminous binders - Preparation of test samples
- DD ENV 13419-3-1999 Building Products - Determination of the Emission of Volatile Organic Compounds Part 3: Procedure for Sampling, Storage of Samples and Preparation of Test Specimens
- EN ISO 29768:2022 Thermal insulating products for building applications - Determination of linear dimensions of test specimens (ISO 29768:2022)
- EN 12085:2013 Thermal insulating products for building applications - Determination of linear dimensions of test specimens
- prEN ISO 24223:2021 Cheese - Guidance on sample preparation for physical and chemical testing (ISO/DIS 24223:2021)
- EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test
- EN ISO 664:2008 Oilseeds - Reduction of laboratory sample to test sample
YU-JUS, when testing samples
HU-MSZT, when testing samples
Japanese Industrial Standards Committee (JISC), when testing samples
- JIS G 0416 AMD 1:2008 Steel and steel products -- Location and preparation of samples and test pieces for mechanical testing (Amendment 1)
- JIS K 7153:2008 Plastics -- Determination of linear dimensions of test specimens
- JIS A 1158:2014 Method for reducing samples of aggregate to testing size
- JIS K 6225:1998 Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests
Standard Association of Australia （SAA）, when testing samples
SE-SIS, when testing samples
- SIS SS 11 21 34-1986 Spheroidal graphite cast iron - Test samples for tensile testpieces
- SIS SS 13 42 05-1990 Methods of testing cement — Methods of taking and preparing samples of cement
- SIS 18 41 51 E-1967 In the event of any differences in interpretation of this standard the Swedish version shall take precedence over this translation.
- SIS SS-ISO 5089:1990 Textiles — Preparation of laboratory test samples and test specimens for chemical testing.
- SIS SS 25 12 15-1981 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- SIS SS 19 10 12-1992 Animal feeding stuffs, chemical examination — Preparation of test samples
- SIS SS 11 21 27-1989 Spheroidal graphite castiron — Tensile testpieces type Q and test samples
AT-ON, when testing samples
CU-NC, when testing samples
- NC 35-01-1967 Final sample preparation for testing of essential oils
- NC 54-343-1986 Construction Materials and Products. Rocks Load-on-Time Test
- NC 80-23-1984 Fish and Shellfish. Fish Preserves. Test Sample Preparation
- NC 04-02-1966 Test pieces for tensile testing oí metais
CO-ICONTEC, when testing samples
PT-IPQ, when testing samples
- NP 1808-1991 Têxtil es Chemical testing. Preparation of laboratory test sample and test specimens
Group Standards of the People's Republic of China, when testing samples
- T/SHRH 010-2018 Cosmetics Eye irritation Test - Short Time Exposure Test
- T/CAQI 159-2020 Sampling and Real-time RT-PCR assay for detection of SARS-CoV-2 in food and food packaging surface
KR-KS, when testing samples
- KS M ISO 4044-2017 Leather — Chemical tests — Preparation of chemical test samples
- KS M ISO 11093-2-2018 Paper and board — Testing of cores — Part 2: Conditioning of test samples
- KS K ISO 5089-2019 Textiles — Preparation of laboratory test samples and test specimens for chemical testing
- KS M ISO 739-2019 Sodium carbonate for industrial use — Preparation and storage of test samples
- KS K ISO 105-J05-2018(2023) Textiles — Tests for colour fastness — Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant(CMCCON02)
FI-SFS, when testing samples
ZA-SANS, when testing samples
- SANS 5867:1976 Preparation of samples of vulcanized rubbers for testing
- SANS 6299:2006 Lime tests - Physical properties - Sample preparation
- SANS 5867:2008 Preparation of samples of vulcanized rubbers for testing
- SANS 6292:2006 Lime tests - Chemical analysis - Sample preparation and reagents
- SANS 904:2010 Leather - Chemical tests - Preparation of chemical test samples
- SANS 5983:2000 Preparation of test specimens for moisture content determination in timber and timber products
- SANS 5089:1977 Textiles - Preparation of laboratory test samples and test specimens for chemical testing
- SANS 471:2003 Rubber - Temperatures, humidities and times for conditioning and testing
- SANS 5591:1975 Preparation of samples and extracts used in testing plastics for medical use
- SANS 12308:2005 Plain bearings - Quality assurance - Sample types - Definitions, applications and testing
- SANS 5860:2006 Concrete tests - Dimensions, tolerances and uses of cast test specimens
Taiwan Provincial Standard of the People's Republic of China, when testing samples
- CNS 10989-1984 Methods for Reducing Field Samples of Aggregate to Testing Size
- CNS 14917-2005 Method of preparing and testing specimens from shotcrete test panels
SG-SPRING SG, when testing samples
- SS 78 Pt.A11-1987 Testing Concrete Part A11 : Method Of Normal Curing Of Test Specimens (27 ℃ Method)
Canadian General Standards Board （CGSB), when testing samples
未注明发布机构, when testing samples
- DIN EN ISO 11816-1:2006 Milk and dairy products — sampling and testing procedures
- DIN EN 20139:1992 Textiles – Normal climates for sample preparation and testing EN 20 139
- BS EN 1402-2:2003(2008) Unshaped refractory products — Part 2 : Sampling for testing
- DIN EN ISO 24223:2022 Cheese – Guide to sample preparation for physical and chemical testing
- DIN EN ISO 1513:1994 Paints and varnishes — Examination and preparation of samples for testing
- BS EN ISO 9773:1999(2004) Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small - flame ignition source
- DIN EN 13374:2004 Temporary side protection systems – product specifications and test procedures
- BS EN ISO 16000-11:2006(2010) Indoor air — Part 11 : Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
- BS EN ISO 10724-1:2001(2002) Plastics — Injection moulding oftest specimens of thermosetting powder moulding compounds (PMCs) — Part1 : Generalprinciples and moulding ofmultipurpose test specimens
TR-TSE, when testing samples
- TS 2071-1975 POTASSIUM HYDROXIDE FOR INDUSTRIAL USE - SAMPLING - TEST SAMPLE - PREPARATION OF THE MAIN SOLUTION FOR CARRYING OUT CERTAIN DETERMINATIONS
- TS 636-1968 METHOD FOR THE CONDITIONING OF PAPER AND BOARD TEST SAMPLES
NL-NEN, when testing samples
- NEN 1960-1967 Testing of pulp. Sampling and preparation of sample
IL-SII, when testing samples
- S.I.628-1966 MICROBIOLOGICAL TESTING OF MILK AND MILK PRODUCTS : SAMPLING
ET-QSAE, when testing samples
Society of Automotive Engineers (SAE), when testing samples
IT-UNI, when testing samples
AASHTO - American Association of State Highway and Transportation Officials, when testing samples
- T 248-2014 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- T 248-2002 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
- T 248-2011 Standard Method of Test for Reducing Samples of Aggregate to Testing Size
Professional Standard - Agriculture, when testing samples
- GB 9865-1988 Preparation of Vulcanized Rubber Samples and Test Specimens
VN-TCVN, when testing samples
CL-INN, when testing samples
VE-FONDONORMA, when testing samples
BE-NBN, when testing samples
- NBN T 31-036-1980 Rubber, vulcanized - Determination of dimensions of test pieces and products for test purposes
- NBN T 63-002-1980 Surface active agents and detergents- Methods of sample division
Professional Standard - Commodity Inspection, when testing samples
- SN/T 3932-2014 Rapid detection of Bacillus Cereus for export foods.Real-time PCR method
U.S. Environmental Protection Agency (U.S. EPA), when testing samples
GB-REG, when testing samples
US-FCR, when testing samples
国家能源局, when testing samples
- SY/T 7314-2016 Carbonate rock micro-area sample preparation and testing procedures
GOSTR, when testing samples
Military Standard of the People's Republic of China-General Armament Department, when testing samples
- GJB 736.16-1994 Pyrotechnics Test Method Ignition Pressure-Time Curve Determination
GM Europe, when testing samples
Henan Provincial Standard of the People's Republic of China, when testing samples
Military Standards (MIL-STD), when testing samples
工业和信息化部, when testing samples
- JB/T 12727.2-2020 Nondestructive testing instrument specimens Part 2: Radiographic testing specimens
工业和信息化部/国家能源局, when testing samples
- JB/T 12727.5-2016 Non-destructive testing instrument specimens Part 5: Penetrant testing specimens