ZH
RU
ES

Drop weight test and impact test

Drop weight test and impact test, Total:497 items.

In the international standard classification, Drop weight test and impact test involves: Mechanical testing, Standardization. General rules, Paints and varnishes, Protection of and in buildings, Petroleum, petroleum products and natural gas handling equipment, Plastics, Equipment for the rubber and plastics industries, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Rubber and plastics products, Testing of metals, Protection against dangerous goods, Pipeline components and pipelines, Reinforced plastics, Glass, Environmental testing, Raw materials for rubber and plastics, Electrical and electronic testing, Vibrations, shock and vibration measurements, Electrical accessories, Elements of buildings, Cases. Boxes. Crates, Ground service and maintenance equipment, Footwear, Construction materials, Freight distribution of goods, Analytical chemistry, Structure and structure elements, Products of the chemical industry, Electrical engineering in general, Vibration and shock with respect to human beings, Hand-held tools, Road engineering, Electromechanical components for electronic and telecommunications equipment, Protective equipment, Horology, Packaging and distribution of goods in general, Insulating materials, Linear and angular measurements, Equipment for petroleum and natural gas industries, Cellular materials, Products of the textile industry, Semiconductor devices, Packaging materials and accessories, Ceramics, Welding, brazing and soldering, Iron and steel products, Non-textile floor coverings, Diagnostic, maintenance and test equipment, Test conditions and procedures in general, Electronic component assemblies, Bottles. Pots. Jars.

Professional Standard - Light Industry, Drop weight test and impact test

QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight

Professional Standard - Machinery, Drop weight test and impact test

JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials
JB/T 6865-1993 Pendulum type high and low temperature impact testing machine technical conditions

National Metrological Technical Specifications of the People's Republic of China, Drop weight test and impact test

JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines
JJF 1300-2011 Program of Pattern Evaluation of Pendulum Impact Testing Machines
JJF(航空) 036-1988 Verification method of pendulum weighing instrument for impact testing machine
JJF 1320-2011 Calibration Specification for Instrumented Charpy Pendulum Impact Testing Machines

Taiwan Provincial Standard of the People's Republic of China, Drop weight test and impact test

CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method
CNS 10703-1993 Method of Pendulum Impact Test for Bumpers of Passenger Cars
CNS 13335-1994 Method of Test for Dart Impact Resistance of Plastic Films and Sheets
CNS 14969-2-75-2006 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
CNS 10424-1983 Charpy Impact Testing Machines
CNS 10425-1983 Method of Test for Charpy Impact Testing Machines
CNS 3033-2000 Test pieces for impact test for metallic materials
CNS 8768-1982 Izod Impact Testing Machines
CNS 2999-2004 Packaging－Complete, filled transport packages－Vertical impact test by dropping

British Standards Institution (BSI), Drop weight test and impact test

BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS EN ISO 13802:2015 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
BS EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
BS EN ISO 148-1:2010 Metallic materials. Charpy pendulum impact test. Test method
BS EN ISO 148-2:2009 Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Verification of testing machines
BS EN 10045-2:1993(1999) Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN ISO 148-2:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Verification of testing machines
BS EN ISO 148-3:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
BS EN ISO 28927-10:2011 Hand-held portable power tools. Test methods for evaluation of vibration emission. Percussive drills, hammers and breakers
BS EN ISO 148-1:2016 Tracked Changes. Metallic materials. Charpy pendulum impact test. Test method
BS EN 60068-2-81:2003 Environmental testing - Test methods - Test Ei - Shock - Shock response spectrum synthesis
BS EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Impact tests (free connectors) - Test 7a - Free fall (repeated)
BS ISO 29584:2015 Glass in building. Pendulum impact testing and classification of safety glass
BS EN 60068-2-27:2009 Environmental testing - Part 2-27:Tests - Test Ea and guidance - Shock
BS EN 12600:2002(2010) Glass in building. Pendulum test. Impact test method and classification for flat glass
BS 3900-E8:1974 Methods of test for paints - Resistance to impact (pendulum test)
BS EN 60512-7-2:2012 Connectors for electronic equipment. Tests and measurements. Impact tests (free connectors). Test 7b. Mechanical strength impact
BS EN 22248:1993 Complete, filled transport packages. Method for determination of resistance to vertical impact by dropping

Professional Standard - Petroleum, Drop weight test and impact test

SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)
SY/T 6476-2013 Practice for drop-weight tear tests on steel line pipe
SY/T 6476-2000 Drop-weight tear tests of steel pipe
SY/T 6476-2007 Practice for drop-weight tear tests on steel line pipe

Standard Association of Australia （SAA）, Drop weight test and impact test

AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS 60068.2.75:2003 Environmental testing - Tests - Test Eh: Hammer tests
AS 2582.4:2003 Complete, filled transport packages - Methods of test - Vertical impact test by dropping
AS 60068.2.81:2004 Environmental testing - Tests - Test Ei: Shock - Shock response spectrum synthesis
AS/NZS 2512.3.2:1997 Methods of testing protective helmets - Determination of impact energy attenuation - Striker drop test
AS 1330:2019 Metallic materials — Drop weight tear test for steels
AS 60068.2.77:2004 Environmental testing - Tests - Test 77: Body strength and impact shock
AS 2001.2.8:2001 Methods of test for textiles - Physical tests - Determination of tear force of fabrics using the ballistic pendulum method (Elmendorf)

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Drop weight test and impact test

GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
GB/T 3808-2002 Verification of pendulum-type impact testing machines(ISO 148-2:1998,Metallic materials--Charpy pendulum impact test--Part 2: Verification of test machines,MOD)
GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
GB/T 21189-2007 Verification of pendulum impact-testing machines used for charpy,lzod and tensile impact-testing of plastics
GB/T 8809-2015 Pendulum impact resistance of plastic film
GB/T 8809-1988 Test method for pendulum impact resistance of plastic films
GB/T 229-2007 Metallic materials- Charpy pendulum impact test method
GB/T 18658-2002 Charpy V reference test pieces for verification of pendulum-type impact testing machines (ISO 148-3:1998,Metallic materials--Charpy pendulum impact test--Part 3: Preparation and characterization of charpy V reference test pieces for verification of test
GB/T 19748-2005 Steel.Charpy V-notch pendulum impact test.Instrumented test method
GB/T 27863-2011 Packaging for dangerous goods.The requirement for impact surface of impact test by dropping
GB/T 18658-2018 Charpy V-notch reference test pieces for indirect verification of pendulum impact testing machines
GB/T 2423.55-2023 Environmental testing Part 2: Test methods Test Eh: Hammer test
GB/T 8363-1987 Metallic materials--Drop-weight tear tests of ferritic steels
GB/T 8363-2007 Test method for drop-weight tear tests of steel products
GB/T 6579-2007 Laborator glassware.Thermal shock and thermal shock endurance test methods
GB/T 9639-1988 Plastics-Film and sheeting-Determination of impact resistance--Free falling dart method
GB/T 2423.55-2006 Environmental testing for electric and electronic products.Part 2:Test methods.Test Eh:Hammer tests
GB/T 22631-2008 Vertical building elements.Impact resistance test.Impact bodies and general test procedures
GB/T 2423.5-2019 Environmental testing—Part 2: Test methods—Test Ea and guidance: Shock

German Institute for Standardization, Drop weight test and impact test

DIN EN ISO 13802:2016-07 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015
DIN EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000); English version of DIN EN ISO 13802:2006-06
DIN EN 12600:2003-04 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN EN ISO 148-2:2017-05 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016); German version EN ISO 148-2:2016
DIN EN 12600:2003 Glass in building - Pendulum tests - Impact test method and classification for flat glass; German version EN 12600:2002
DIN EN ISO 179-1:2006 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2000 + Amd.1:2005); German version EN ISO 179-1:2000 + A1:2005
DIN EN 10045-1:1991 Charpy impact test on metallic materials; part 1: test method; german version EN 10045-1:1990
DIN EN ISO 148-1 Beiblatt 1:2014-02 Metallic materials - Charpy pendulum impact test - Part 1: Test method; Supplement 1: Special test pieces
DIN EN ISO 148-1:2017-05 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016); German version EN ISO 148-1:2016
DIN 51222:2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN 51222:2016 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN 60068-2-75:1998 Environmental testing - Part 2: Tests; test Eh: Hammer tests (IEC 60068-2-75:1997); German version EN 60068-2-75:1997
DIN EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015); German version EN ISO 13802:2015
DIN EN ISO 148-3:2017-04 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN 52115-2:1997 Testing of aggregates - Impact test - Part 2: Impact test on ballast
DIN EN 10274:1999-07 Metallic materials - Drop weight tear test; German version EN 10274:1999
DIN 50116:1982 Testing of zinc and zinc alloys; impact test
DIN EN ISO 148-2:2009 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2008); English version of DIN EN ISO 148-2:2009-09
DIN EN ISO 6272-2:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 6272-1:2011-11 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN 22248:1993 Packaging; complete, filled transport packages; vertical impact test by dropping (ISO 2248:1985); german version EN 22248:1992
DIN EN ISO 14556:2023-08 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023); German version EN ISO 14556:2023
DIN EN ISO 13802:2016 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01); German version EN ISO 13802:2015
DIN 53435:2018 Testing of plastics - Bending test and impact test on dynstat test specimens
DIN 53435:1983 Testing of plastics; bending test and impact test on dynstat test pieces
DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011
DIN EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016); German version EN ISO 148-3:2016
DIN 53453:1975 Testing of Plastics; Impact Flexural Test
DIN EN 60068-2-81:2004 Environmental testing - Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis (IEC 60068-2-81:2003); German version EN 60068-2-81:2003
DIN ISO 718:1993 Laboratory glassware; thermal shock and thermal shock endurance; test methods; identical with ISO 718:1990
DIN EN 60068-2-77:1999 Environmental testing - Part 2-77: Tests; test 77: Body strength and impact shock (IEC 60068-2-77:1999); German version EN 60068-2-77:1999
DIN 52295:2010 Testing of glass - Pendulum impact test on containers - Testing by attributes and by variables
DIN 52295:1993 Testing of glass; pendulum impact test on containers; testing by attributes and by variables

Association Francaise de Normalisation, Drop weight test and impact test

NF EN ISO 13802:2015 Plastiques - Vérification des machines d'essai de choc pendulaire - Essais de choc Charpy, Izod et de choc-traction
NF T51-902*NF EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
NF T51-902:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing.
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter
NF A03-012:1992 Metallic materials. Charpy impact test. Part 2 : verification of the testing machine (pendulum impact).
NF A03-011-2:2009 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines.
NF T30-017:1994 Paints and varnishes. Falling-weight test.
NF EN 12600:2003 Verre dans la construction - Essai au pendule - Méthode d'essai d'impact et classification du verre plat
NF A03-015:2001 Steel - Charpy V-notch pendulum impact test - Instrumented test method.
NF A03-011:1990 Metallic materials. Charpy impact test. Part 1 : test method.
NF A03-011-3:2009 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines.
NF A03-011-1:2011 Metallic materials - Charpy pendulum impact test - Part 1 : test method.
NF A03-011-2*NF EN ISO 148-2:2017 Metallic materials - Charpy pendulum impact test - Part 2 : verification of testing machines
NF P78-223*NF EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
NF T70-501:1995 Energetic materials for defense. Safety, vulnerability. Determination of impact sensitivity. Test with 30 kg fallhammer.
NF C20-775:1998 Environmental testing. Part 2 : tests. Test Eh : hammer tests.
NF C20-700-2-75*NF EN 60068-2-75:2015 Environmental testing - Part 2-75 : tests - Test Eh : hammer tests
NF A03-015*NF EN ISO 14556:2015 Metallic maerials - Charpy V-notch pendulum impact test - Instrumented test method
NF E90-321-10*NF EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10 : percussive drills, hammers and breakers
NF H00-042-1*NF EN 22248:1993 Packaging. Complete, filled transport packages. Vertical impact test by dropping.
NF C20-781*NF EN 60068-2-81:2004 Environmental testing - Part 2-81 : tests - Test Ei : shock - Shock response spectrum synthesis
NF A03-011-3*NF EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3 : preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
NF H00-042-2:1990 Packaging. Complete, filled transport packages. Vertical toppling impact test.
NF C20-777*NF EN 60068-2-77:2001 Environmental testing - Pat 2-77 : tests - Test 77 : body strength and impact shock
NF P20-527:1985 METHODS OF TESTING DOORS. SOFT AND HEAVY BODY IMPACT TEST ON DOOR LEAVES. (EUROPEAN STANDARD EN 162).

ES-UNE, Drop weight test and impact test

UNE-EN ISO 13802:2016 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
UNE-EN 12600:2003 ERRATUM:2011 Glass in building - Pendulum test - Impact test method and classification for flat glass.
UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)

American Society for Testing and Materials (ASTM), Drop weight test and impact test

ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D3420-14 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08a Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-95 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-95(2002) Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM D3420-08 Standard Test Method for Pendulum Impact Resistance of Plastic Film
ASTM G13/G13M-13 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
ASTM G13/G13M-21 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test)
ASTM D5487-16 Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D6110-06 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM E680-79(2011)e1 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM E436-91(1997) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM D256-10e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM F1976-06 Standard Test Method for Impact Attenuation Properties of Athletic Shoes Using an Impact Test
ASTM D5265-03 Standard Test Method for Bridge Impact Testing
ASTM D5265-09 Standard Test Method for Bridge Impact Testing
ASTM D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D3332-99(2010) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
ASTM G13-89(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) (Withdrawn 2003)
ASTM C1870-18 Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
ASTM D256-05a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-05 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D6110-02 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-04 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-97 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-08 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6110-05 Standard Test Methods for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D256-06 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D256-06a Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM A327-91(1997) Standard Test Methods for Impact Testing of Cast Irons
ASTM A327-91(2006) Standard Test Methods for Impact Testing of Cast Irons
ASTM A327M-91(2006) Standard Test Methods for Impact Testing of Cast Irons (Metric)
ASTM A327M-91(1997) Standard Test Methods for Impact Testing of Cast Irons (Metric)
ASTM D5265-92(1998)e1 Standard Test Method for Bridge Impact Testing
ASTM D5265-03(2009) Standard Test Method for Bridge Impact Testing
ASTM A327/A327M-22 Standard Test Methods for Impact Testing of Cast Irons
ASTM D5265-23 Standard Test Method for Bridge Impact Testing
ASTM A327/A327M-11 Standard Test Methods for Impact Testing of Cast Irons
ASTM A327/A327M-11(2017) Standard Test Methods for Impact Testing of Cast Irons
ASTM D5265-09(2016) Standard Test Method for Bridge Impact Testing
ASTM E436-03 Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels
ASTM D1709-04 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D1709-03 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
ASTM D5487-16(2022) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
ASTM D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

Danish Standards Foundation, Drop weight test and impact test

DS/EN ISO 13802:2006 Plastics – Verification of pendulum impact-testing machines – Charpy, Izod and tensile impact-testing
DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
DS/IEC 68-2-63:1993 Environmental testing. Part 2: Test methods. Test Eg: Impact, spring hammer
DS/EN 12600:2003 Glass in building - Pendulum test - Impact test method for flat glass
DS/EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method
DS/EN ISO 14556/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces
DS/ISO 2248:1986 Packaging. Complete, filled transport packages. Vertical impact test by dropping
DS/EN 10274:2000 Metallic materials - Drop weight tear test
DS/EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
DS/EN 22248:1993 Packaging. Complete, filled transport packages. Vertical impact test by dropping
DS/IEC 68-2-62:1992 Environmental testing. Part 2: Test methods. Test Ef: Impact,pendulum hammer
DS/EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

European Committee for Standardization (CEN), Drop weight test and impact test

prEN ISO 13802 rev Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
EN 10054-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:2015, Corrected version 2016-04-01)
EN ISO 148-1:2010 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
EN 10045-2:1992 Metallic Materials - Charpy Impact Test - Part 2: Verification of the Testing Machine (Pendulum Impact)
EN ISO 179-2:2020 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020)
EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
EN 22244:1992 Packaging - Complete, Filled Transport Packages - Horizontal Impact Tests (Horizontal or Inclined Plane Test - Pendulum Test) (ISO 2244: 1985)
EN ISO 14556:2023 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2023)
EN ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
EN ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN 22248:1992 Packaging - Complete, Filled Transport Packages - Vertical Impact Test by Dropping (ISO 2248: 1985)
EN ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines (ISO 148-2:2016)
FprEN ISO 14556 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO/FDIS 14556:2023)
prEN ISO 148-3 rev Metallic materials — Charpy pendulum impact test — Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
EN ISO 14556:2015 Metallic materials - Charpy Vnotch pendulum impact test - Instrumented test method

International Organization for Standardization (ISO), Drop weight test and impact test

ISO/CD 13802 Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing
ISO 13802:1999 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 13802:2015 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing
ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO/R 442:1965 Verification of pendulum impact testing machines for testing steels
ISO 13802:1999/cor 1:2000 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing; Technical Corrigendum 1
ISO 6272:1993 Paints and varnishes; falling-weight test
ISO/TR 6272:1979 Paints and varnishes — Falling weight test
ISO 148-1:2009 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-1:2016 Metallic materials - Charpy pendulum impact test - Part 1: Test method
ISO 148-3:2008 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 148-3:2016 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
ISO 14556:2023 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 14556 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 148-2:2016 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
ISO 2244-1:1972 Packaging — Complete, filled transport packages — Part 1: Horizontal impact tests (Inclined plane test, pendulum test)
ISO 2248:1972 Title missing - Legacy paper document
ISO 2248:1985 Packaging; Complete, filled transport packages; Vertical impact test by dropping
ISO 179-2:1997/cor 1:1998 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test; Technical Corrigendum 1
ISO 179-1:2000/Amd 1:2005 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test; Amendment 1
ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers
ISO 718:1990 Laboratory glassware; thermal shock and thermal shock endurance; test methods

Korean Agency for Technology and Standards (KATS), Drop weight test and impact test

KS F 2379-2017(2022) Testing method for deflections with a falling-weight-type impulse load device
KS M ISO 13802-2016(2021) Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS M ISO 13802:2012 Plastics-Verification of pendulum impact-testing machines-Charpy, Izod and tensile impact-testing
KS M ISO 13802:2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS D ISO 148-1:2007 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS D ISO 148-1:2015 Metallic materials-Charpy pendulum impact test-Part 1:Test method
KS B ISO 148-2:2004 Metallic materials-Charpy pendulum impact test-Part 2:Verification of test machines
KS B ISO 148-2:2013 Metallic materials－Charpy pendulum impact test－Part 2：Verification of test machines
KS C 0239-1995(2015) Environmental testing Part 2:Test methods Test Eg:Impact, spring hammer.
KS F 2379-2017 Testing method for deflections with a falling-weight-type impulse load device
KS B 5546-2003(2018)
KS B 5546-1993
KS W 2549-2002(2012) Tests, impact, shock absorber landing gear, aircraft
KS W 2549-1982 Tests, impact, shock absorber landing gear, aircraft
KS W 2549-1987 Tests, impact, shock absorber landing gear, aircraft
KS B 5546-2003 Pendulum－Type impact testing machines for non－metallic materials
KS D ISO 148-1-2007(2012) Metallic materials－Charpy pendulum impact test－Part 1：Test method
KS B ISO 14556-2002(2012) Steel－Charpy V－notch pendulum impact test－Instrumented test method
KS M ISO 179-2:2012 Plastics－Determination of Charpy impact properties－Part 2：Instrumented impact test
KS C IEC 60068-2-75-2017(2022) Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C IEC 60068-2-77-2012(2022) Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock
KS C IEC 60068-2-75:2010 Environmental testing-Part 2:Tests-Test Eh:Hammer tests
KS C IEC 60068-2-75:2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS B 5522-1992 Charpy type impact testing machines
KS B 5522-1985 Charpy type impact testing machines
KS T ISO 2248:2009 Packaging－Complete, filled transport packages－Vertical impact test by dropping
KS C IEC 60068-2-81:2005 Environmental testing－Part 2－81：Tests－Test Ei：Shock－Shock response spectrum synthesis
KS C IEC 60068-2-27-2017(2022) Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS B 5544-2003(2018)
KS B 5522-1992(2022) Charpy type impact testing machines
KS B 5522-1992(2017) Charpy type impact testing machines
KS C IEC 60255-21-2-2002(2022) Electrical relays — Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment —Section Two: Shock and bump tests
KS C IEC 60068-2-27:2010 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C 0241-1998(2008) Basic environmental testing procedures Part 2 : Tests Test Ea and guidance : Shock
KS C IEC 60068-2-27:2017 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock
KS C IEC 60068-2-77-2012(2017) Environmental testing－Part 2-77：Tests－Test 77：Body strength and impact shock

工业和信息化部, Drop weight test and impact test

HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing
JB/T 13810-2020 Instrumented Charpy Pendulum Impact Testing Machine

未注明发布机构, Drop weight test and impact test

BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

Professional Standard - Chemical Industry, Drop weight test and impact test

HG/T 3213-1987 Drop impact test of polypropylene pall packing
HG/T 6137-2023 Pendulum car tire impact testing machine
HGB 4037-1960 Ebonite impact test

PT-IPQ, Drop weight test and impact test

NP 269-1962 Métaux. Essa! de choo Oharpy isur éprouvette entaillée

Japanese Industrial Standards Committee (JISC), Drop weight test and impact test

JIS B 7722:1990 Charpy impact testing machines
JIS B 7722:1999 Charpy pendulum impact test -- Verification of testing machines
JIS R 3110:2021 Pendulum impact test method for glass in building
JIS B 7740:1999 Charpy pendulum impact test -- Reference test pieces for verification of testing machines
JIS C 0046:1993 Environmental testing Part 2: Test methods Test Eg: Impact, spring hammer
JIS B 7722:2018 Metallic materials -- Charpy pendulum impact test -- Verification of testing machines
JIS B 7739:2011 Pendulum-type impact-testing machines for Non-Metallic Materials -- Verification of testing machines
JIS B 7755:2011 Charpy pendulum impact test for metal -- Instrumentation
JIS B 7739:1989 Pendulum-type impact testing machines for non-metallic materials
JIS C 60068-2-75:2004 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS C 60068-2-75:2019 Environmental testing -- Part 2-75: Tests -- Test Eh: Hammer tests
JIS K 7111-1:2006 Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
JIS K 7111-2:2006 Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
JIS K 7124:1987 Testing method for dart impact resistance of plastic film and sheeting
JIS W 2509:1979 Tests, impact, shock absorber landing gear, aircraft
JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
JIS B 7740:2018 Metallic materials -- Charpy pendulum impact test -- Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
JIS B 7027:2018 Shock-resistant wrist watches -- Impact performance and test methods
JIS K 7077:1991 Testing method for charpy impact strength of carbon fiber reinforced plastics
JIS Z 3111:2005 Methods of tension and impact tests for deposited metal
JIS B 7723:1976 Izod impact testing machines
JIS C 5402-7-1:2016 Connectors for electronic equipment -- Tests and measurements -- Part 7-1: Impact tests (free connectors) -- Test 7a: Free fall (repeated)
JIS C 0058:2002 Environmental testing -- Part 2-77: Tests -- Test 77: Body strength and impact shock

RO-ASRO, Drop weight test and impact test

STAS SR EN 10045-2-1994 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
STAS 7238-1980 PENDULUM IMPACT TESTING MACHIXES, FOR TESTING MATERIALS
STAS R 10025-1975 Tests of metals U-and V-notch impact test COMPARATIVE TABLE OF IMPACT STRENGHT AND IMPACT ENERGY
STAS SR EN ISO 6272:1995 Paints and varnishes - Falling weight test
STAS 11152-1978 Tesl of metals VERTICAL NOTCH IMPACT TEST

BE-NBN, Drop weight test and impact test

NBN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)
NBN-EN 10045-1-1992 Metallic materials - Charpy impact test - Part 1: Test method

KR-KS, Drop weight test and impact test

KS M ISO 13802-2016 Plastics－Verification of pendulum impact-testing machines－Charpy, Izod and tensile impact-testing
KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS C IEC 60068-2-75-2017 Environmental testing－Part 2：Tests－Test Eh：Hammer tests
KS C IEC 60068-2-27-2017 Environmental testing－Part 2：Tests－Test Ea and guidance：Shock

VN-TCVN, Drop weight test and impact test

TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter
TCVN 4871-1989 Packaging and transport packages.Vertical impact tests by dropping
TCVN 7699-2-75-2011 Environmental testing.Part 2-75: Tests.Test Eh: Hammer tests
TCVN 7155-2002 Laboratory glassware.Thermal shock and thermal shock endurance.Test methods
TCVN 7699-2-27-2007 Environmental testing.Part 2-27: Tests.Test Ea and guidance: Shock

国家市场监督管理总局、中国国家标准化管理委员会, Drop weight test and impact test

GB/T 3808-2018 Verification of pendulum-type impact testing machines
GB/T 39814-2021 Test method for impact strength of ultrathin glass—Ball drop method
GB/T 229-2020 Metallic materials—Charpy pendulum impact test method
GB/T 19748-2019 Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method

National Metrological Verification Regulations of the People's Republic of China, Drop weight test and impact test

JJG 541-2005 Falling Body Type Shock Testing Machines
JJG 145-1982 Verification Regulation of Pendulum Impact Testing Machine
JJG 145-2007 Pendulum Impact Testing Machines
JJG 541-1988 Verification Regulation of Body Type Shock Testing Machine
JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester
JJG 1174-2021 Shock and Bump Testing Machines

Lithuanian Standards Office , Drop weight test and impact test

LST EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy, Izod and tensile impact-testing (ISO 13802:1999, including Corrigendum 1:2000)
LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
LST EN 12600-2003 Glass in building - Pendulum test - Impact test method and classification for flat glass
LST EN ISO 14556:2000 Steel - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2000)
LST EN 10274-2000 Metallic materials - Drop weight tear test
LST EN ISO 14556:2000/A1:2006 Steel - Charpy V-notch pendulum impact test - Instrumented test method - Amendment 1: Annex D - Instrumented Charpy V-notch pendulum impact test of sub-size test pieces (ISO 14556:2000/Amd 1:2006)
LST EN ISO 148-3:2009 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2008)

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Drop weight test and impact test

GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test
GJB 5383.2-2005 Test methods of sensitivity and stability for pyrotechnic Part 2: Test for impact sensitivity falling weight method

CEN - European Committee for Standardization, Drop weight test and impact test

EN ISO 13802:2006 Plastics - Verification of pendulum impact-testing machines - Charpy@ Izod and tensile impact-testing
EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter
EN ISO 148-2:2008 Metallic materials - Charpy pendulum impact test - Part 2: Verification of testing machines
EN ISO 28927-10:2011 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills@ hammers and breakers

GOSTR, Drop weight test and impact test

GOST 34373-2017 Plastics. Verification of pendulum impact-testing machines. Charpy, Izod and tensile impact-testing
GOST 18425-2018 Complete, filled transport packages. Vertical impact test by dropping

American National Standards Institute （ANSI), Drop weight test and impact test

ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ANSI/ASTM D5420:1998 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ANSI/ASTM D2463:1995 Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers (08.02)

SE-SIS, Drop weight test and impact test

SIS 11 23 50 E-1974 Slagprovning med U-provstav i Charpy-hejare
SIS 11 03 21-1966 Calibration of pendulum impact testing machines Charpy
SIS 11 03 20-1966 Calibration of pendulum impact testing machines Charpy
SIS SS-EN 10 045-1-1990 Metallic materials — Charpy impact test — Part 1: Test method
SIS SS 11 03 20-1983 Impact test - Charpy impact testing machines - Direct verification
SIS 11 03 21 E-1974 Kontroll av Charpy-hejare. Verifiering med kontrollstavar
SIS SMS 2564-1971 Automobiles. Impact test pendelums
SIS SS 11 03 21-1983 Impact test - Charpy impact testing machines - Indirect verification using unnotched test pieces
SIS SEN 43 16 05-1971 Environmental testing, tmpact test. Test E
SIS SS 02 71 19-1989 Geotechnical tests — Percussion liquid limit

RU-GOST R, Drop weight test and impact test

GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST R ISO 148-1-2013 Metallic materials. Charpy pendulum impact test. Part 1.Test method
GOST 25387-1982 Complete, filled transport packages. Rolling and topping tests
GOST 32564.2-2013 Glass and glass products. Test method for resistance to impact of hammer and axe
GOST 18425-1973 Complete, filled transport packages. Vertical impact test by dropping

IN-BIS, Drop weight test and impact test

NL-NEN, Drop weight test and impact test

NEN-EN 10045-2-1993 Metallic materials. Charpy impact test. Part 2: Verification of the testing machine (pendulum impact)

Malaysia Standards, Drop weight test and impact test

MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)
MS 133 Pt.E7-2000 Methods of test for paints and varnishes:Part E7:Resistance to impact (Falling ball test) (First revision)

Professional Standard - Military and Civilian Products, Drop weight test and impact test

WJ 233-1977 Hammer testing machine
WJ 2426-1997 Pneumatic hammer test method
WJ 2257-1994 Hammer testing machine verification regulations
WJ 2168-1993 Hammer test method for flash caps and detonators

AT-ON, Drop weight test and impact test

ONORM EN 10045-2-1993 Metalhc matenals - Charpy impact test - Part 2: Verif ication of the testing machine (pendulum impact)
ONORM EN 22244-1993 Packaging - Complete, filled transport packages -Horizontal impact tests (horizontal or inclined plane test - Pendulum test) (ISO 2244:1985)
ONORM S 6072-1991 Equipment of shelters — Shock fest and criterias of shocktested parts for outfit of shelters
ONORM ISO 2248:1988 Packaging; complete, filled transport packages; vertical impact fest by dropping
ONORM E 1358-1977

Professional Standard - Railway, Drop weight test and impact test

TB/T 1961-1987 Vehicle buffer performance and drop weight test method

International Electrotechnical Commission (IEC), Drop weight test and impact test

IEC 60068-2-62:1991 Environmental testing; part 2: test methods; test Ef: impact, pendulum hammer
IEC 60068-2-63:1991 Environmental testing; part 2: test methods; test Eg: impact, spring hammer
IEC 60068-2-81:2003 Environmental testing - Part 2-81: Tests; Test Ei: Shock; Shock response spectrum synthesis
IEC PAS 62185:2000 Thermal shock test method
IEC 60068-2-27:2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock
IEC 60068-2-27:1987 Environmental testing. Part 2: Tests. Test Ea and guidance: Shock
IEC 60068-2-75:1997 Environmental testing - Part 2: Tests - Test Eh: Hammer tests
IEC 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free components) - Test 7a: Free fall (repeated)
IEC PAS 62186:2000 Mechanical shock test method
IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests

AENOR, Drop weight test and impact test

UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)
UNE-EN 12600:2003 Glass in building - Pendulum test - Impact test method and classification for flat glass.
UNE-EN 10274:1999 METALLIC MATERIALS. DROP WEIGHT TEAR TEST
UNE-EN ISO 148-1:2017 Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016)
UNE-EN 60068-2-81:2004 Environmental testing -- Part 2-81: Tests - Test Ei: Shock - Shock response spectrum synthesis
UNE-EN 60068-2-27:2011 Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock
UNE-EN ISO 148-3:2017 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines (ISO 148-3:2016)

CZ-CSN, Drop weight test and impact test

CSN 26 9313-1986 Plastic crates. Vertical impact test by dropping
CSN 77 0210-1967 Impact resistance tests of foils by the free falling-DART method
CSN 42 0346-1979 Metal testing. Determination of transition temperature of structural steels using the bending-impact test of large pieces of original thickness
CSN 25 0254-1985 Pendulum impact testing machines

国家质量监督检验检疫总局, Drop weight test and impact test

SN/T 4955-2017 Test method for non-marking of shoe soles - pendulum impact method

未注明发布机构, Drop weight test and impact test

BS EN ISO 13802:2015(2017) Plastics — Verification of pendulum impact - testing machines — Charpy, Izod and tensile impact - testing
JIS Z 2242:2023 Method for Charpy pendulum impact test of metallic materials
BS 131-4:1972(2000) Methods for notched bar tests — Part 4 : Calibration of Izod pendulum impact testing machines for metals

Professional Standard - Aviation, Drop weight test and impact test

HB 7067-1994 Drop weight impact test method for transparent plastic panels
HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates

Professional Standard - Aerospace, Drop weight test and impact test

QJ 3039-1998 Test method for drop weight impact sensitivity of composite solid propellants
QJ 1323.15-1987 Electromagnetic relay test method impact (specified pulse) test

ZA-SANS, Drop weight test and impact test

SANS 148-1:2007 Metallic materials - Charpy pendulum impact test Part 1: Test method
SANS 42:1965 Verification of pendulum impact testing machines for testing steels

Canadian General Standards Board （CGSB), Drop weight test and impact test

CGSB 1-GP-71 METH 147.2-1978 Methodes D'Essai Des Peintures Et Pigments Resistance Aux Chocs Methode De La Bille Tombante

Society of Automotive Engineers (SAE), Drop weight test and impact test

SAE AS6053A-2012 Tests, Impact, Shock Absorber Landing Gear, Aircraft
SAE J211B-1974 INSTRUMENTATION FOR IMPACT TEST
SAE J211A-1971 INSTRUMENTATION FOR IMPACT TESTS
SAE J977A-1968 INSTRUMENTATION FOR LABORATORY IMPACT TESTS
SAE J211-1988 Instrumentation for Impact Test

European Committee for Electrotechnical Standardization（CENELEC）, Drop weight test and impact test

EN 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)
EN 60068-2-81:2003 Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis

YU-JUS, Drop weight test and impact test

JUS Z.M8.015-1984 Packaging. Complete, filled transport packages. Horizonta! impact test (inclined plane test, pendulum test)
JUS Z.M8.014-1984 Packaging. Complete, filled transport packages. Vertical impact test by free fali

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会, Drop weight test and impact test

GB/T 8363-2018 Steel—Drop-weight tear tests method

GM North America, Drop weight test and impact test

GM GMN10041-2003 Kapuskasing Drop Impact Test for Finished Leather
GM GM9904P-1997 Multi-Axial Impact Test
GM GM9700P-2004 Powder Impact Fusion Test

Military Standard of the People's Republic of China-General Armament Department, Drop weight test and impact test

GJB 5309.37-2004 Test methods for pyrotechnics Part 37: Hammer test

SAE - SAE International, Drop weight test and impact test

SAE J211-2004 INSTRUMENTATION FOR IMPACT TEST (PDF IS NOT AVAILABLE)
SAE J977-1966 INSTRUMENTATION FOR LABATORY IMPACT TESTS

International Federation of Trucks and Engines, Drop weight test and impact test

NAVISTAR MPAPS DT-4-2016 Impact Test For Plastics
NAVISTAR CEMS DT-4-2016 VOID - Impact Test For Plastics

GM Daewoo, Drop weight test and impact test

GMKOREA EDS-T-7742-2011 Steel Ball Impact Test

API - American Petroleum Institute, Drop weight test and impact test

API RP 5L3-2014 Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)
API RP 5L3 RUSSIAN-2014 Recommended Practice for Conducting Drop-Weight Tear Tests on Line Pipe (ЧЕТВЕРТАЯ РЕДАКЦИЯ)

American Petroleum Institute (API), Drop weight test and impact test

API RP 5L3-2014(2021) Drop-Weight Tear Tests on Line Pipe (FOURTH EDITION)

国家能源局, Drop weight test and impact test

SY/T 6476-2017 Drop weight tear test method for pipeline steel pipes

Group Standards of the People's Republic of China, Drop weight test and impact test

T/CPF 0056-2023 Test method for fusion of polystyrene foam— Falling cone impact method

Indonesia Standards, Drop weight test and impact test

SNI 19-4781-1998 Test method for inchie impact test for shipping containers

(U.S.) Ford Automotive Standards, Drop weight test and impact test

FORD FLTM EU-BI 057-02-2001 STONE CHIP RESISTANCE TEST
FORD FLTM BO 151-2-2001 LOW TEMPERATURE IMPACT TEST FOR PLASTICS

TH-TISI, Drop weight test and impact test

TIS 2380.2-27-2013 Environmental testing.part 2-27: tests.test ea and guidance: shock

(U.S.) Telecommunications Industries Association , Drop weight test and impact test

TIA-455-25-C-2002 FOTP- 25 Impact Testing of Optical Fiber Cables
TIA-455-25-D-2016 FOTP-25 Impact Testing of Optical Fiber Cables

TIA - Telecommunications Industry Association, Drop weight test and impact test

TIA/EIA-455-25C-2002 FOTP-25 Impact Testing of Optical Fiber Cables

Aerospace, Security and Defence Industries Association of Europe (ASD), Drop weight test and impact test

ASD-STAN PREN 2003-3-1998 Aerospace Series Steel Test Methods Part 3: Calibration of Pendulum Impact Machines (Edition P 1)