ZH
RU
ES

Drop hammer impact test energy

Drop hammer impact test energy, Total:125 items.

In the international standard classification, Drop hammer impact test energy involves: Mechanical testing, Standardization. General rules, Paints and varnishes, Rubber and plastics products, Plastics, Waxes, bituminous materials and other petroleum products, Equipment for the chemical industry, Protection of and in buildings, Petroleum, petroleum products and natural gas handling equipment, Protective equipment, Testing of metals, Pipeline components and pipelines, Protection against dangerous goods, Products of the chemical industry, Reinforced plastics, Linear and angular measurements, Raw materials for rubber and plastics, Road engineering, Electromechanical components for electronic and telecommunications equipment, Mining equipment, Insulating materials.

Professional Standard - Light Industry, Drop hammer impact test energy

QB/T 2918-2007 Case and bag.Test method for impact resistance by means of falling weight

Professional Standard - Machinery, Drop hammer impact test energy

JB/T 12275-2015 Drop-weight impact testing machines used for metallic materials
JB/T 9389-2008 Specification for falling weight impact testing machines used for non-metallic materials

National Metrological Technical Specifications of the People's Republic of China, Drop hammer impact test energy

JJF 1445-2014 Calibration Specification for Falling Weight Impact Testing Machines

Taiwan Provincial Standard of the People's Republic of China, Drop hammer impact test energy

CNS 13784-1996 General Rules for Testing Impact Strength of Rigid Plastic by the Falling Weigth Method

British Standards Institution (BSI), Drop hammer impact test energy

BS 3900-E3:1973 Methods of test for paints - Impact (falling weight) resistance
BS EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Falling-weight test, large-area indenter
BS EN ISO 6272-2:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, small-area indenter
BS EN ISO 6272-1:2011 Paints and varnishes. Rapid-deformation (impact resistance) tests. Falling-weight test, large-area indenter
BS EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Impact tests (free connectors) - Test 7a - Free fall (repeated)

American Society for Testing and Materials (ASTM), Drop hammer impact test energy

ASTM D5420-98a Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-04 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D4272-08 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-08a Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-14 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272/D4272M-15 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM G14-04 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-88(1996)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2018) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM F736-95(2006) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM G14-04(2010) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
ASTM D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-07 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5628-06 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D5628-96(2001)e1 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM E680-79(1999) Standard Test Method for Drop Weight Impact Sensitivity Of Solid-Phase Hazardous Materials
ASTM E680-79(2018) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
ASTM D4495-00 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D4495-12 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
ASTM D2444-99(2005) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D2463-15 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM F736-95(2001) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
ASTM D4272-99 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
ASTM D7136/D7136M-15 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D4272/D4272M-23 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop
ASTM D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
ASTM D5420-16 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D4272-03 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D4272-09 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
ASTM D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
ASTM D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
ASTM D1822-99 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
ASTM D4495-16 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Drop hammer impact test energy

GB 11548-1989 Test method for impact resistance of rigid plastic sheets (dropping weight method)
GB/T 11548-1989 Standard test method for impact resistance of rigid plastic sheeting by means of a tup(falling weight)
GB/T 14153-1993 General test method for impact resistance of rigid plastics by means of falling weight
GB/T 20624.1-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 1: Falling-weight test, large-area indenter
GB/T 20624.2-2006 Paints and varnishes. Rapid-deformation(impact resistance) tests. Part 2: Falling-weight test, small-area indenter
GB/T 9639-1988 Plastics-Film and sheeting-Determination of impact resistance--Free falling dart method
GB/T 14485-1993 Standard methods of testing for impact resistance of plats and pats made from engineering plastic rigid plastics by a ball (falling ball)
GB/T 9639.1-2008 Plastics film and sheeting.Determination of impact resistance by the free-falling dart method.Part1:Staircase method

Professional Standard - Petroleum, Drop hammer impact test energy

SY 0040-2013 Test method for impact resistance of pipeline anti-corrosion coating (drop weight test method)
SY/T 0040-2013 Test method for impact resistance of pipeline coatings.(Falling weight test)
SY/T 0040-1997 Test method for impact resistance of pipeline caotings(Falling weight test)

Korean Agency for Technology and Standards (KATS), Drop hammer impact test energy

KS F 2379-2017(2022) Testing method for deflections with a falling-weight-type impulse load device
KS M ISO 6272-2-2013(2018) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2018) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter
KS M ISO 6272-1:2010 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 1:Falling-weight test, large-area indenter
KS M ISO 6272-2:2008 Paints and varnishes-Rapid-deformation(impact resistance) tests-Part 2:Falling-weight test, small-area indenter
KS M ISO 6272-2:2013 Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1:2013 Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter

工业和信息化部, Drop hammer impact test energy

HG/T 3213-2018 Test method for drop weight impact strength of plastic tower packing

Standard Association of Australia （SAA）, Drop hammer impact test energy

AS/NZS 4347.6:1995 Damp-proof courses and flashings - Methods of test - Determining impact resistance (falling dart impact test)
AS/NZS 2512.3.2:1997 Methods of testing protective helmets - Determination of impact energy attenuation - Striker drop test
AS 1580.406.1:2004 Paints and related materials - Methods of test - Resistance to impact - Falling weight test (Gardner-type tester)
AS/NZS 2512.3.1:1999 Methods of testing protective helmets Method 3.1-Determination of impact energy attenuation-Helmet drop test

Professional Standard - Chemical Industry, Drop hammer impact test energy

HG/T 3213-1987 Drop impact test of polypropylene pall packing

American National Standards Institute （ANSI), Drop hammer impact test energy

ANSI/ASTM D2444:1999 Test Method For Determination Of The Impact Resistance Of Thermoplastic Pipe And Fittings By Means Of A Tup Falling Weight
ANSI/ASTM D5420:1998 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ANSI/ASTM D4495:2012 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

Professional Standard - Railway, Drop hammer impact test energy

TB/T 1961-1987 Vehicle buffer performance and drop weight test method

Japanese Industrial Standards Committee (JISC), Drop hammer impact test energy

JIS K 7211:1976 General rules for testing impact strength of rigid plastics by the falling weight method
JIS C 5402-7-1:2016 Connectors for electronic equipment -- Tests and measurements -- Part 7-1: Impact tests (free connectors) -- Test 7a: Free fall (repeated)

Association Francaise de Normalisation, Drop hammer impact test energy

NF T70-501:1995 Energetic materials for defense. Safety, vulnerability. Determination of impact sensitivity. Test with 30 kg fallhammer.
NF T30-017-1*NF EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1 : falling-weight test, large-area indenter
NF T30-017-2*NF EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2 : falling-weight test, small area indenter
NF EN ISO 6272-2:2011 Peintures et vernis - Essais de déformation rapide (résistance au choc) - Partie 2 : essai de chute d'une masse avec pénétrateur de surface réduite

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence, Drop hammer impact test energy

GJB 5403.2-2005 Test method of launch safety of explosive charge Part 2: Drop hammer impact test

VN-TCVN, Drop hammer impact test energy

TCVN 2100-1-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part1:Falling-weight test,large-area indenter
TCVN 2100-2-2007 Paints and varnishes.Rapid-deformation(impact resistance)tests.Part2:Falling-weight test,small-area indenter

RU-GOST R, Drop hammer impact test energy

GOST 33496-2015 Polymer composites. Method for testing the resistance to damage during a falling weight impact
GOST R 53655.2-2009 Plastics film and sheeting. Determination of impact resistance by the free-falling weight method. Part 2. Instrumented puncture test

National Metrological Verification Regulations of the People's Republic of China, Drop hammer impact test energy

JJG 931-1998 Verification Regulation of Instruments for Measuring Monent of Pendulum of Impact Tester

German Institute for Standardization, Drop hammer impact test energy

DIN EN ISO 179-2:2012 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997 + Amd.1:2011); German version EN ISO 179-2:1999 + A1:2012
DIN EN ISO 179-2:2000 Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:1997); German version EN ISO 179-2:1999
DIN 51222:2017 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN 51222:2016 Materials testing machines - Impact test - Particular requirements on pendulum impact testing machines with a capacity of nominal energy <= 50 J and verification
DIN EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010); German version EN ISO 179-1:2010
DIN EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011); German version EN ISO 6272-1:2011
DIN EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011); German version EN ISO 6272-2:2011

Danish Standards Foundation, Drop hammer impact test energy

DS/EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
DS/EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
DS/EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

KR-KS, Drop hammer impact test energy

KS M ISO 6272-2-2013(2023) Paints and varnishes — Rapid deformation(impact resistance)tests–Part 2: Falling-weight test, small-area indenter
KS M ISO 6272-1-2013(2023) Paints and varnishes — Rapid-deformation (impact resistance) tests –Part 1: Falling-weight test, large-area indenter

International Organization for Standardization (ISO), Drop hammer impact test energy

ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-2:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter
ISO 6272-1:2002 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter
ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter

RO-ASRO, Drop hammer impact test energy

STAS R 10025-1975 Tests of metals U-and V-notch impact test COMPARATIVE TABLE OF IMPACT STRENGHT AND IMPACT ENERGY

CEN - European Committee for Standardization, Drop hammer impact test energy

EN ISO 6272-1:2004 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test@ large-area indenter
EN ISO 6272-2:2006 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test@ small-area indenter

European Committee for Standardization (CEN), Drop hammer impact test energy

EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter

IN-BIS, Drop hammer impact test energy

IS 2380 Pt.10-1977

Professional Standard - Aviation, Drop hammer impact test energy

HB 8619-2021 Test method for drop weight impact damage resistance of aerospace polymer matrix composite laminates

Malaysia Standards, Drop hammer impact test energy

MS 133 Pt.E3-2000 Methods of test for paints and varnishes:Part E3:Resistance to impact(Falling-weight test)(First revision)(ISO 6272:1993,MOD)

Lithuanian Standards Office , Drop hammer impact test energy

LST EN ISO 6272-2:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
LST EN ISO 6272-1:2011 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)

AENOR, Drop hammer impact test energy

UNE-EN ISO 6272-2:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011)
UNE-EN ISO 6272-1:2012 Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011)

GM North America, Drop hammer impact test energy

GM GM9685P-1996 Impact Test for Energy Management Plastic Foam

未注明发布机构, Drop hammer impact test energy

AS/NZS 2512.3.1:2007

Group Standards of the People's Republic of China, Drop hammer impact test energy

T/GXMES 004-2023 Hydraulic rock drill impact energy test method laser vibration measurement method

International Electrotechnical Commission (IEC), Drop hammer impact test energy

IEC 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free components) - Test 7a: Free fall (repeated)

European Committee for Electrotechnical Standardization（CENELEC）, Drop hammer impact test energy

EN 60512-7-1:2010 Connectors for electronic equipment - Tests and measurements - Part 7-1: Impact tests (free connectors) - Test 7a: Free fall (repeated)

GM Global, Drop hammer impact test energy

GMW 14853-2013 Non-Metallic Fuel Tank, Minus 40 癈, Six (6) Meter Drop Test or 4000 Joule Energy Impact Issue 2; English