17.060 体积、质量、密度和粘度的测量 标准查询与下载

T/CMA YX095-2023 洗板机校准方法

本标准规定了洗板机的校准方法和校准结果等。

Calibration method for Microplate Washer

T/SZJL 5-2023 洁净室服装及织物 空气粒子过滤效率检测方法

本文件规定了洁净室服装及织物对空气粒子过滤效率的检测方法，其中包括：术语和定义、检测原理、检测条件、检测操作、结果报告等。 本文件适用于医药、半导体、精密机械仪表等行业的洁净室及相关受控环境内使用的，纺织机或非织造布制作的透气型洁净室服装及织物。本文件主要关注洁净室服装及织物对空气中颗粒的过滤效率，尤其是对粒径小于0.5 μm 粒子的过滤性能，以适应洁净室不断提高的洁净度要求。

Cleanroom garment and fabric—Test method of airborne particle filtration efficiency

ASTM D445-23 透明和不透明液体运动粘度的标准试验方法（和动态粘度的计算）

Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

T/QGCML 1776-2023 开关料位计

本文件规定了开关料位计的术语和定义、技术要求、结构组成、安装方法、标定投用、放射源管理和安全防护等。 本文件适用于开关料位计的设计与实现。

Switch level gauge

T/QGCML 1777-2023 智能密度计

本文件规定了智能密度计的术语和定义、技术要求、结构组成、安装方法、标定投用、放射源管理和安全防护等。 本文件适用于智能密度计的设计与实现。

Smart Density Meter

T/QGCML 1778-2023 连续料位计

本文件规定了连续料位计的术语和定义、技术要求、结构组成、安装方法、标定投用、放射源管理和安全防护、日常管理。 本文件适用于连续料位计的设计与实现。

Continuous material level meter

ASTM E3277-23a 用流变学测定材料液态或固态的标准试验方法

Standard Test Method for Determining the Liquid or Solid State of a Material by Rheometry

T/QGCML 1024-2023 波纹管防水传感器

本标准规定了波纹管防水传感器的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于波纹管防水传感器的生产、检验和验收。

Bellows waterproof sensor

ASTM D1545-13(2023) 用气泡时间法测定透明液体粘度的标准试验方法

Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method

ASTM D4212-16(2023) 用浸渍型粘度杯测定粘度的标准试验方法

Standard Test Method for Viscosity by Dip-Type Viscosity Cups

ISO/FDIS 8655-10:2023 活塞式容量装置 第 10 部分：用户指南和能力、培训和 POVA 适用性要求

Piston-operated volumetric apparatus — Part 10: User guidance and requirements for competence, training, and POVA suitability

T/QGCML 960-2023 电子吊钩秤生产技术规范

本文件规定了电子吊钩秤（以下简称“吊秤”)的术语和定义、基本要求、计量要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本文件适用于对处于自由悬吊状态下的被称物品进行称量的无线数传式，秤体直视式电子吊秤。

Technical specifications for the production of electronic hook scales

T/QGCML 961-2023 电子防水秤生产技术规范

本文件规定了电子防水秤的要求、试验方法、检验方法及标志、包装、运输和贮存等。 本文件适用电子防水秤（仅适用于工厂、实验室的称重和配方用秤,非贸易用秤）的设计、制造、试验和应用。

Technical specifications for the production of electronic waterproof scales

T/QGCML 962-2023 电子条码秤生产技术规范

本文件规定了电子条码秤的要求、试验方法、检验方法、检验规则及标志、包装、运输和贮存等。 本文件适用电子条码秤的设计、制造、试验和应用。

Electronic barcode scale production technical specification

T/QGCML 959-2023 电子厨房秤生产技术规范

本文件规定了家用电子厨房秤（以下简称厨房秤）的型号、要求、试验方法、检验规则、标志、使用说明书、包装、运输及贮存。 本文件适用于10 kg以下量程，以称重传感器及承重元件，发光二极管或液晶显示器(以下分别简称LED/LCD) 数字显示的家用电子秤。 本文件未包括的电子衡器功能，只要不妨碍称重功能要求，任何功能都允许设置。

Technical specification for production of electronic kitchen scales

ASTM E3277-23 通过流变测定法测定材料的液态或固态的标准测试方法

1.1 Using rheometry, this test method determines, for regulatory purposes, whether a viscose viscous material is a liquid or a solid. Very small amounts of material (typical less than 3 g) may be used for this measurement. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determining the Liquid or Solid State of a Material by Rheometry

ASTM E2408-04(2023) 农业喷雾罐混合物的相对拉伸粘度的标准测试方法

Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes

ASTM E3116-23 旋转粘度计粘度测量验证的标准测试方法

1.1 This test method provides procedures for validating viscosity measurements by rotational viscometers of Newtonian fluids. Performance parameters determined include viscosity repeatability (precision), detection limit, quantitation limit, linearity, and bias. 1.2 Validation of apparatus performance and analytical methods is requested or required for quality initiatives or where results may be used for legal purposes. 1.3 The values stated in SI units are the standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers

GSO ASTM D7042:2023 用刺棒式粘度计测定液体动态粘度和密度的标准测试方法（以及运动粘度的计算）

  Scope is not provided for this standard

Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

T/HIS 015-2023 基于图像处理的粮仓粮食数量在线监测规程

本规程规定了散粮平房仓、楼房仓、浅圆仓、立筒仓、地下仓粮食储藏仓型的基于图像处理的粮食数量在线监测的术语和定义、技术和安装要求。 本规程适用于散粮平房仓、楼房仓、浅圆仓、立筒仓、地下仓粮食储藏仓型的基于图像处理的粮仓粮食数量在线监测。

On-line monitoring procedure of granary grain quantity based on image processing