23.040 管道部件和管道 标准查询与下载
共找到 337 条与 管道部件和管道 相关的标准，共 23 页
本规范规定了仪表用气源、操作压力、供气容量、供气方式及供气系统管路设计的最低要求。本规范适用于新建、扩建和改建石油化工工程中自动控制仪表所需的气源及供气系统设计。
Design specification for instrument air supply system in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2013-10-17
- 实施
- 2014-03-01
本规范规定了石油化工自动控制工程仪表测量及管道隔离、吹洗设计的最低要求。本规范适用于石油炼制、石油化工及以煤为原料制取燃料和化工产品的工厂新建、扩建和改建工程的仪表测量及管道隔离、吹洗的工程设计。本规范不适用于为防腐蚀或在爆炸危险场所采用的正压通风系统。
Design specification for sealing and purging of instrument and tubing in petrochemical industry
- ICS
- 23.040
- CCS
- P80
- 发布
- 2013-10-17
- 实施
- 2014-03-01
本规程规定了石油化工钢制管道的施工程序和技术要求。本规程适用于石油化工工程中公称压力不大于PN420 (CL2500),设计温度-196℃~850℃的碳素钢、合金钢、不锈钢等钢制管道(以下简称管道)的施工,不适用于长输管道、有色金属管道、非金属管道和城镇公用管道的施工。
Technical specification for construction of steel piping in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2013-10-17
- 实施
- 2014-03-01
本标准规定了多层金属波纹管膨胀节的术语和定义、产品分类、要求、试验方法、检验规则及标志、包装、贮存和运输、本标准适用于多层金属波纹管膨胀节(以下简称膨胀节)、
Multiply metal bellows expansion joints
- ICS
- 23.040
- CCS
- J15
- 发布
- 2013-04-25
- 实施
- 2013-09-01
本标准规定了石油化工钢制对焊管件(包括弯头、异径管、三通、管帽等)的尺寸、公差、技术要求、检验、试验和标志等要求。本标准适用于石油化工管道用公称直径为DN 15~DN 3400的钢制对焊管件的制造及验收。
Steel butt-welding pipe fittings in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了石油化工用公称直径DN 6~DN 750的不锈钢、DN 6~DN 3400的碳素钢、合金钢无缝钢管及焊接钢管的尺寸系列。本标准适用于石油化工钢制管道,不适用于仪表用管道。
Series of steel pipe size in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本规范规定了石油化工给水排水管道设计的要求。本规范适用于石油化工给水排水管道的设计。
Specification for design of water supply and wastewater piping in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本规范规定了石油化工管道材料的选用、管道组成件的选用要求和计算方法。本规范适用于石油化工装置中公称压力不大于PN 420 (CL2500)、设计温度不超过材料允许使用温度范围的管道组成件的选用。本规范不适用于非金属管道。
Specification for piping material design selection in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准规定了石油化工锻钢制承插焊和螺纹管件的尺寸、公差、制造、检验、试验和标志等要求。本标准适用于石油化工管道用公称直径为DN 6~DN 100的锻钢制承插焊和螺纹管件的制造及验收。
Forged steel socket-welded and threaded fittings in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2012-11-07
- 实施
- 2013-03-01
本标准适用于最高工作压力大于等于 0.1 MPa，公称直径大于 25 mm，介质工作温度高于 -45℃的氨制冷系统安装工程的压力管道。
Pressure Pipe Installation Supervision Inspection Regulation for Ammonia Refrigeration System
- ICS
- 23.040
- CCS
- J74
- 发布
- 2011-09-13
- 实施
- 2011-10-13
本标准规定了公用压力管道日常维护与定期检查的基本要求，以及日常维护与定期检查的一般规定和具体内容。本标准适用于工作压力大于或者等于0.1MPa（表压）、公称直径大于25mm的下列钢质公用压力管道：设计压力不大于4.0MPa的城镇燃气管道；设计压力不小于或者等于1.6MPa，设计温度小于或者等于350℃蒸汽介质的热力管道；设计压力不小于或者等于2.5MPa，设计温度大于标准沸点但小于或者等于200℃热水介质的热力管道；本标准不适用于液态燃气介质、石油介质的管道。
Specifications for daily maintenance and periodic inspection of public pressure pipelines
- ICS
- 23.040
- CCS
- J74
- 发布
- 2011/08/01
- 实施
- 2011/08/01
本通则规定了管道用金属波纹管膨胀节的材料、选用和安装要求。 本通则适用于石油化工管道用金属波纹管膨胀节的选用和安装。
General rules for arrangement and selection of metal bellows expansion joint
- ICS
- 23.040
- CCS
- P72
- 发布
- 2009-12-04
- 实施
- 2010-06-01
This International Standard gives the definition of DN (nominal size) when applied to components of a pipework system, as specified in those standards which use the DN designation system. NOTE 1 Other methods of size designation are also used, e.g. products having threaded, compression, solder or welded end connections or products designated by NPS (nominal pipe size), OD (outside diameter), ID (inside diameter), but these are not defined in this International Standard. This International Standard gives a list of preferred DN values.
Pipe work components – Definition and selection of DN ( Nominal Size )
- ICS
- 23.040
- CCS
- 发布
- 2008-02-20
- 实施
本导则规定了石油化工工艺装置管径选择方法。 本导则适用于石油化工工艺装置管径选择。 本导则不适用于储运系统管道、非牛顿流体和固体气流输送管道的管径选择。
Guide for pipeline sizing in petrochemical industry
- ICS
- 23.040
- CCS
- P72
- 发布
- 2007-11-14
- 实施
- 2008-05-01
The purpose of this Standard is to establish minimum physical, performance, and health effects requirements for plastics piping system components and related materials. In this edition of NSF/ANSI 14, the following revision has been incorporated: – An update to 5.7 for chlorine resistance test requirements to include a PEX pipe manufacturer using a PEX material that already has chlorine resistance classification. This Standard was developed by the NSF Joint Committee on Plastics using the consensus process described in NSF Standards Development Policies and accredited by ANSI. Suggestions for improvement of this Standard are welcome. Comments should be sent to Chair, Joint Committee on Plastics, c/o NSF International, Standards Department, P.O. Box 130140, Ann Arbor, Michigan 48113-0140, USA.
Plastics Piping System Components and Related Materials
- ICS
- 23.040
- CCS
- G33
- 发布
- 2007-10-04
- 实施
A-A-3174, dated 25 July 2000, has been reviewed and determined to be valid for use in acquisition.
PLASTIC SHEET, POLYOLEFIN
- ICS
- 23.040
- CCS
- G33
- 发布
- 2007-06-13
- 实施
QPL-P-P-560-12, which identified products qualified under the requirements specified in P-P-560, has been transformed to an equivalent qualification data set (QDS).
POLISH, PLASTIC
- ICS
- 23.040
- CCS
- G33
- 发布
- 2007-05-11
- 实施
QPL-25690-15, which identified products qualified under the requirements specified in MIL-PRF-25690, has been transformed to an equivalent qualification data set (QDS).
PLASTIC, SHEETS AND FORMED PARTS, MODIFIED ACRYLIC BASE MONOLITHIC, CRACK PROPAGATION RESISTANT
- ICS
- 23.040
- CCS
- G33
- 发布
- 2007-05-01
- 实施
QPL-15265-16, which identified products qualified under the requirements specified in MIL-I-15265, has been transformed to an equivalent qualification data set (QDS).
Insulation, Electrical Plastic (Submarine Bus Bar Covering)
- ICS
- 23.040
- CCS
- G33
- 发布
- 2007-04-04
- 实施
