23.040 管道部件和管道 标准查询与下载

NAVY QPL-3064-24 NOTICE 1-2007 带电绝缘塑料密封物

QPL-3064-24, which identified products qualified under the requirements specified in MIL-I-3064, has been transformed to an equivalent qualification data set(QDS). Qualification information previously provided in this List is now available from the Qualified Products Database(QPD).

Insulation, Electrical, Plastic-Sealer

ARMY A-A-52686 A-2007 飞机丙烯酸塑料窗修补用维修箱

This CID is for a kit to restore optical clarity to lightly scratched or scuffed transparent acrylic windshields and windows.

MAINTENANCE KIT, ACRYLIC PLASTIC WINDOW REFINISHING, AIRCRAFT

NAVY QPL-3064-24-2007 带电绝缘塑料密封物

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

INSULATION, ELECTRICAL, PLASTIC-SEALER

DLA MIL-C-18312 F VALID NOTICE 1-2007 电容器,固定的,敷金属(纸塑料或塑料薄膜)介质,直流电(密封在金属箱内)的通用规格

MIL-C-18312F, dated 27 August 2001, remains inactive for new design; however, the document is valid for use.

CAPACITORS, FIXED, METALLIZED (PAPER-PLASTIC, OR PLASTIC FILM) DIELECTRIC, DIRECT CURRENT (HERMETICALLY SEALED IN METAL CASES), GENERAL SPECIFICATION FOR

NAVY MIL-PRF-29597 C (2)-2007 用于污染食物的塑料垃圾的隔味袋

This specification covers the requirements of flexible odor barrier bags used for the disposal of food-contaminated plastic waste.

BAG, ODOR BARRIER, FLEXIBLE-FOR FOOD CONTAMINATED PLASTIC WASTE

AWWA C602-2006 现场用尺寸为4英寸(100mm)及更大的供水管水泥砂浆衬

This standard describes the requirements for the materials and application of a cement-mortar lining to the inside surface of 4-in. (100-mm) and larger new and old steel, ductile-iron, and cast-iron water pipelines that have been previously installed, as well as related work. The application requirements are (1) that the lining of straight pipe sections and long radius bends shall be performed by a machine that progresses uniformly through the pipe, applies cement mortar against the pipe surfaces, and is provided with an attachment for mechanically troweling the mortar to obtain a smooth lining of uniform thickness with smooth transitions over joints; and (2) that the lining of bends, specials, and areas adjacent to valves shall be machine sprayed and hand troweled or, where machine placement is impractical, shall be performed manually.

Cement-Mortar Lining of Water Pipelines in Place - 4 in. (100 mm) and Larger

NAVY QPL-24179-26-2006 可变形单细胞塑料热绝缘黏合剂

has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary.

ADHESIVE, FLEXIBLE UNICELLULAR-PLASTIC THERMAL INSULATION

NAVY QPL-24249-5 NOTICE 1-2006 硬的空隙填料泡沫聚乙烯大规模安装泡沫适当位置 塑料物质

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote indorsement of the product by the Department of Defense.

PLASTIC MATERIAL, CELLULAR POLYURETHANE, RIGID, VOID FILLER, FOAM-IN-PLACE, LARGE SCALE AND INSTALLATION OF

AWWA C209-2006 钢水管特别部分连接装置外部冷应用磁带涂层

This standard describes the material, application, and curing of shop-applied, cement-mortar protective linings and coatings for steel water pipe and fittings, and field jointing of cement-mortar-lined-and-coateds teel water pipe and fittings.

Cold-Applied Tape Coatings for the Exterior of Special Sections, Connections, and Fittings for Steel Water Pipelines

DLA MIL-PRF-83421 D-2006 可靠性指标,热密封金属箱体及非金属箱体,(直流,交流,或直流与交流)塑料薄膜介电,金属固定电容器的一般规定

This specification covers the general requirements for established eliability (ER), metallized plastic film dielectric, fixed capacitors, hermetically sealed in metal or ceramic cases. Capacitors covered by this specification have failure rate levels (FRL) established in accordance with MIL-STD-690. The reliability for each level is identified by a symbol in accordance with table I. These FRLs are established at a 90 percent confidence level and maintained at a 10 percent producer's risk and, unless otherwise specified (see 3.1), are based on life tests performed at maximum rated voltage at maximum rated temperature. Unless otherwise specified (see 3.1), anacceleration factor of 5:1 has been used to relate life-test data obtained at 140 percent of rated voltage at maximum rated temperature, to accelerated voltage (140 percent of rated voltage) at maximum rated temperature (see 6.1). A part per million (PPM) quality system is used for documenting and reporting the average outgoing quality of capacitors supplied to this specification. Statistical process control (SPC) techniques are required in the manufacturing process to minimize variation in production of capacitors supplied to the requirements of this specification.

CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-88028 REV C-2006 固定纸质(或纸制塑料)介质的电容起

This drawing describes the requirements for paper (or papeplastic) dielectric capacitors.

CAPACITORS, FIXED, PAPER (OR PAPER-PLASTIC) DIELECTRIC

NAVY QPL-17578-14 NOTICE 1-2006 塑料填料物质(密封封闭固定)(标志1425)

QPL-17578-14, which identified products qualified under the requirements specified in MIL-P-17578, has been transformed to an equivalent qualification data set (QDS).

PACKING MATERIAL, PLASTIC (FOR DOGS FOR WATERTIGHT CLOSURES) (SYMBOL 1425)

DLA A-A-59504 VALID NOTICE 1-2006 有压敏粘合剂涂层的透明乙酸纤维素塑料板(薄板材料)

A-A-59504, dated 27 December 2000, has been reviewed and determined to be valid for use in acquisition.

PLASTIC SHEET (SHEETING), PRESSURE SENSITIVE ADHESIVE COATED, CELLULOSE ACETATE, TRANSPARENT

AWWA C224-2006 钢水管内部和外部特殊部分连接装置尼龙11基的聚酰胺涂层系统

This standard describes polyamide (Nylon-II-based) coating systems for interior and exterior of steel pipe, connections, fittings, and special sections that are used in water-handling equipment that is installed aboveground, belowground, or underwater. Polyamide coating systems are thermoplastic and are ordinarily applied in a shop or manufacturing facility. 1.1.1 M/n/mum pipe diameter. The minimum pipe diameter for application of the polyamide coating system to the interior of a pipe shall be the diameter that permits effective inspection and repair. For joints of pipe, this minimum diameter is ordinarily 24 in. (600mm). For pipe diameters less than 24 in. (600 mm), the coating manufacturer shall be consulted regarding methods of inspection and repair. 1.1.2 Maximum temperature. AWWA pipe coating standards arc written for and based on the service temperature of potable water. The maximum temperature at which a polyamide coating system can be used shall be specified by the manufacturer.

Nylon-11-Based Polyamide Coating System for the Interior and Exterior of Steel Water Pipe, Connecctions, Fittings, and Special Sections

SH/T 3415-2005 高频电阻焊螺旋翅片管

本标准规定了石油化工管式炉用钢制高频电阻焊螺旋翅片管（以下简称翅片管）制造、检验和验收的技术要求。 本标准适用于石油化工管式炉用翅片管。

High frequency resistance welded helically finned tubes

SH/T 3054-2005 石油化工厂区管线综合设计规范

本规范适用于新建、扩建或改建工程的石油化工厂区管线综合设计。不适用于各生产单元内的管线综合设计。本规范不适用于湿陷性黄土地区。 执行本规范时，尚应符合国家现行有关强制性标准规范的规定。

Coordination of pipelines design code for petrochemical plant

DLA QPL-83421-58-2005 密封在金属个案或陶瓷的情况下确定可靠性塑料薄膜介电常数(直流,交流,或直流与交流)金属固定电容器一般规格

Electronic Supply Center, 32 River Street, North Adams, MA 01247, US

CAPACITORS, FIXED, METALLIZED, PLASTIC FILM DIELECTRIC (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA QPL-39022-61-2005 纸张塑料薄膜或塑料薄膜电介质直接和交流电(密封在金属或陶瓷例)固定金属电容器定制可靠性一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL-PRF-39022. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense

CAPACITORS, FIXED, METALLIZED, PAPER-PLASTIC FILM, OR PLASTIC FILM DIELECTRIC, DIRECT AND ALTERNATING CURRENT (HERMETICALLY SEALED IN METAL OR CERAMIC CASES), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

NAVY QPL-15280-31-2005 单细胞塑料物质(薄片和管道)

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the contractor from compliance with the specification requirements.

PLASTIC MATERIAL, UNICELLULAR (SHEETS AND TUBES)

NAVY QPL-23653-31-2005 塑料砖瓦减震器

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

PLASTIC TILES, VIBRATION DAMPING