共找到 337 条与 管道部件和管道 相关的标准,共 23 页
A-A-55624, dated 11 MARCH 1997, has been reviewed and determined to be valid for use in acquisition.
SCREW, MACHINE, PAN HEAD, SLOTTED, PLASTIC (NYLON), UNC-2A
This standard sets minimum requirements for shop- and field-applied, liquid-epoxy interior linings and exterior coatings used in the potable-water-supply industry for steel water pipelines installed underground or underwater, under normal construction
Liquid-Epoxy Coating Systems for the Interior and Exterior of Steel Water Pipelines
This standard describes the material, application, and curing of shop-applied, cement-mortar protective linings and coatings for steel water pipe and fittings, and field jointing of cement-mortar-lined-and-coateds teel water pipe and fittings.
Field Welding of Steel Water Pipe
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release or otherwise affect the obligation of the manufacturer to comply with the specification requirements.
PLASTIC, SHEETS AND FORMED PARTS, MODIFIED ACRYLIC BASE MONOLITHIC, CRACK PROPAGATION RESISTANT
This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release orotherwise affect the obligation of the manufacturer to comply with the specification requirements.
PLASTIC, SHEETS AND FORMED PARTS, MODIFIED ACRYLIC BASE MONOLITHIC, CRACK PROPAGATION RESISTANT
This Gulf standard is concerned with water well casing and screen threaded pipes from unplasticized polyvinyl chloride for sizes from 113 mm up to 630 mm nominal outside diameter.
WATER WELL CASING AND SCREEN THREADED PIPES FROM UNPLASTICIZED POLYVINYL CHLORIDE
This Gulf standard specifies the test procedure to be applied for determining the burst pressure of thermoplastic pipe fittings REMARK: It is the responsibility of whoever uses this standard to establish all appropriate safety precautions before doing this test. This standard does not purport to address all the safety problems associated with its use
Thermoplastic pipe bittings burst pressure test .
This Gulf standard is concerned with unplasticized polyvinyl chloride (uPVC) non-pressure pipe fittings with elastomeric sealing ring joints for nominal sizes between DN 110 and DN 630 used for transportation of soil and waste discharge of domestic and industrial origin by buried drains and sewers.
UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPE FITTINGS FOR BURIED DRAINS AND SEWERS
This Gulf standard is concerned with the methods of test for unplasticized polyvinyl chloride (UPVC) non-pressure pipe fittings with elastomeric sealing ring joint for nominal sizes between DN 110 and DN 630 used for transportation of soil and waste discharge of domestic and industrial origin by buried gravity drains and sewers.
METHODS OF TEST FOR UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) PIPE FITTINGS FOR BURIED DRAINS AND SEWERS
This Gulf standard is concerned with the methods of testing water well casing and screen threaded pipes for unplasticized polyvinyl chloride for sizes from 113 up to 630 mm nominal outside diameter
Methods of testing water well casing and screen threaded pipes from unplasticized poly vinyl chloride.
This standard is concerned with polyethylene pipes used for general purposes such as potable water supply, drain and sewer, agricultural uses, and industrial use excluding pipes used for gas distribution..
POLYETHYLENE PIPES FOR GENERAL PURPOSES
This Gulf standard is concerned with methods of testing unplasticized polyvinyl chloride pipes for nominal sizes ranging from 110 to 1000, and intended for use in transportation of soil and waste discharges of normal domestic and industrial origin by buried gravity drains and sewers.
METHODS OF TESTING UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPES FOR BURIED/DRAINS AND SEWERS
This Gulf standard is concerned with the methods of test for unplasticized Polyvinyl Chloride (uPVC) pipe fittings with elastomeric sealing ring joints of nominal sizes between DN 40 and DN 160 used for soil, waste and vent systems inside buildings for non-pressure applications.
METHODS OF TEST FOR UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPE FITTINGS FOR SOIL, WASTE AND VENT INSIDE BUILDINGS
This Gulf standard specifies the required properties of injection moulded unplasticized polyvinyl chloride (UPVC) pipe fittings with an elastomeric sealing ring joints or with sockets for solvent cementing. The nominal sizes of these fittings can be up to 225 mm. These fittings are intended for the conveyance of potable water and water for general purposes under pressure at 60oC, in buried or above ground mains and branches both inside or outside buildings.
UNPLASTICIZED POLYVINYL CHLORIDE (UPVC) PIPE FITTING — SEALING RING TYPE AND PLAIN SOCKET FOR PRESSURIZED WATER LINES– INJECTION MOULDED FITTINGS
This Gulf standard is concerned with unplasticized polyvinyl chloride (uPVC) pipe fittings, which have not been subjected to pressure, with elastomeric sealing ring joints having nominal sizes between DN 40 and DN 160 used for waste and vent systems inside buildings.
UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPE FITTINGS FOR SOIL, WASTE AND VENT INSIDE BUILDINGS
This Gulf standard specifies a method for the determination of the “Vicat” softening temperature of thermoplastics pipes and fittings.
THERMOPLASTICS PIPES AND FITTINGS - METHOD OF DETERMINATION OF VICAT SOFTENING TEMPERATURE
This Gulf standard is concerned with methods of testing polyethylene pipes used for general purposes such as water supply, drain and sewer, agricultural uses, and industrial uses, excluding gas distribution.
METHODS OF TESTING POLYETHYLENE PIPES FOR GENERAL PURPOSES
This Gulf standard is concerned with the methods of testing injection moulded unplasticized polyvinyl chloride (uPVC) pipe fittings with an elastomeric sealing ring joints or with sockets for solvent cementing. The nominal sizes for these fittings can be up to 225 mm. These fittings are intended for the conveyance of potable water and water for general purposes under pressure at 60 Co, in buried or above ground mains and branches both inside or outside buildings
METHOD OF TESTING UNPLASTICIZED POLYVINYL CHLORIDE (uPVC) PIPE FITTINGS — SEALING RING TYPE AND PLAIN SOCKET FOR PRESSURED WATER LINES — INJECTION MOULDED FITTINGS
This Gulf standard specifies the testing apparatus and the test procedure to be applied for determining the resistance of plastics pipes to a constant internal pressure and the bursting time of these pipes.
PLASTIC PIPES FOR THE TRANSPORT OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE
This CID covers plastisol for general hot dip applications.
COMMERCIAL ITEM DESCRIPTION PLASTIC PLASTISOL (FOR COATING METALLIC OBJECTS)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号