共找到 130 条与 起重设备综合 相关的标准,共 9 页
This International Standard establishes the form of presen-tation and content of the documents which a manufacturershould provide with craes and lifting appliances (hereafter called "equipment"). Such documents give technical informa-tion and include acceptance documents for the equipment to facilitate its installation, testing and use. Specimen acceptance documents are given in the annex.
Cranes and Lifting Appliances – Technical Characteristics and Acceptance Documents
Establishes the values of the minimum practical coefficient of utilization, Zp, as defined in ISO 4308-1 (published in South Africa as an identical adoption under the designation SANS 4308-1), for ropes and rotation-resistant ropes used on mobile cranes.
Cranes and lifting appliances - Selection of wire ropes Part 2: Mobile cranes - Coefficient of utilization
This standard establishes minimum safety requirements for temporary personnel hoisting systems used for the transportation of persons to and from working elevations during normal construction and demolition operations, including maintenance, and is restr
Safety Requirements for Rope-Guided and Nonguided Workers' Hoists for Construction and Demolition Operations
本标准适用于作业台高度在2 m以上之高空工作车。但下列列举者,则不适用。1.1 特殊构造之高空工作车及其构造部分。1.2 行驶于道路应符合交通运输法令之规定,可不适用本标准第3节(供移动之原动机、动力传达装置、移动装置、操纵装置及制动装置)、第4.3节、第5.15节(移动装置
Engineering vehicle for line-men
この規格は,建築物,工作物などに設置したエレべーター(段差解消機及びいす式階段昇降機を含む。),エスカレーター(動く歩道を含む。)及び小荷物専用昇降機の安全について検査するための検査項目,検査器具,検査方法及び判定基準について規定する。
Inspection standard of elevator, escalator and dumbwaiter
This part of SANS 10314 is applicable to the operation, maintenance, documentation, inspection and training of personnel of self-propelled power-operated integral-chassis elevating aerial platforms that have their primary functions (including the drive) controlled from the platform, that cannot be configured with their centre of gravity completely beyond the base and that are used to position personnel, with their tools and materials, at elevated work locations (see figure 1). 2 This part of SANS 10314 is not applicable to a) ladders and ladder stands, b) scaffolding, c) vehicle-mounted elevating and rotating aerial platforms, d) non-self-propelled elevating aerial platforms, NOTE Mobile manually propelled elevating aerial platforms are dealt with in SANS 10314-1. e) self-propelled aerial platforms with boom supports, f) vehicle-mounted vertical lift devices for airliner ground-support vehicle-mounted vertical lifts, g) vehicle-mounted bridge inspection and maintenance devices, h) mast-climbing work platforms, i) suspended powered platforms for exterior building maintenance, j) vertically adjustable equipment used primarily to raise and lower materials and equipment from one elevation to another, k) fire-fighting equipment, I) construction and demolition operation/digger derricks, and m) any attachment or device that is intended to convert an elevating aerial platform that is non-self- propelled into a self-propelled elevating aerial platform, unless the resulting elevating aerial platform falls within the scope of 1.1.
Vertical lift elevating work platforms - Operation and maintenance Part 2: Mobile self-propelled elevating aerial platforms
Specifies two methods for the selection of wire ropes to be used on lifting appliances. Establishes the minimum requirements for acceptable strength and performance levels with respect to design, application and maintenance of the lifting appliance.
Cranes and lifting appliances - Selection of wire ropes Part 1: General
This part of SANS 10314 is applicable to the operation, maintenance, documentation, inspection and training of personnel of manually propelled or towed integral-chassis elevating aerial platforms that are adjustable by manual or powered means, that cannot be configured with their centre of gravity completely beyond the base and that are used to position personnel, with their tools and materials, at elevated work locations (see figure 1). 2 This part of SANS 10314 is not applicable to a) ladders and ladder stands, b) scaffolding, c) vehicle-mounted elevating and rotating aerial platforms, d) self-propelled elevating aerial platforms, e) safety requirements for airliner ground-support vehicle-mounted vertical lift devices, f) vehicle-mounted bridge inspection and maintenance devices, g) mast-climbing work platforms, h) suspended powered platforms for exterior building maintenance, i) vertically adjustable equipment used primarily to raise and lower materials and equipment from one elevation to another, and j) fire-fighting equipment.
Vertical lift elevating work platforms - Operation and maintenance Part 1: Mobile manually propelled elevating aerial platforms
本部分规定了一般用途钢丝绳电动葫芦的基本试验要求、试验类别以及各项试验的检测方法。 本部分主要适用于一般用途钢丝绳电动葫芦,并以产品设计工作级别作为试验的基准条件。其他特殊用途的电动葫芦亦可参照采用。
Electric wire rope hoists Part 2: Testing method
本部分规定了钢丝绳电动葫芦的型式与基本参数、技术要求、检验规则及标志、包装、运输、贮存等内容。 本部分适用于一般用途的电动葫芦,特殊用途的电动葫芦可以参照采用。
Electric wire rope hoists Part 1: Types and basic parameter, specification
本标准制订了石油化工大型设备吊装的施工工艺及其安全技术要求。适用于石油化工工程建设大型设备吊装的施工。一般型及小型工件的吊装施工可参照使用。
Construction standard for large-size equipment hoisting engineering
Lifting Construction Specification for Petrochemical Engineering
Establishes the form of presentaton and content of the documents which a manufacturer should provide with cranes and lifting appliances (hereafter called "equipment").
Cranes and lifting appliances - Technical characteristics and acceptance documents
Establishes a general classification of cranes based on the number of operating cycles to be carried out during the expected life of the crane and a load spectrum factor which represents a nominal state of loading.
Cranes and lifting appliances - Classification Part 1: General
本标准规定了手动油压千斤顶的产品型式、要求、检验方法、检验规则、标志、包装和贮存。 本标准适用于车辆、工矿、船舶及建筑工程等手动油压千斤顶。其他类似型式的油压千斤顶亦可参照使用。
Specification for hydraulic jacks
Cranes and lifting appliances-Technical characterisitics and acceptance documents
1.1 This specification covers the requirements for forged alloy steel lifting components and welded coupling and master links for Grade 80 and Grade 100 alloy chain slings as described in Specification A 906/A 906M. 1.2 Two grades of components and welded links are covered:1.2.1 Grade 80.1.2.2 Grade 100.1.3 This specification is a performance standard. Other standards apply to use of these products. Some of these standards are: OSHA 1910.184, ASME B30.10, and ASME B30.9. 1.4 The values stated in either inch-pound or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification.
Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
This part of ISO 4301 establishes a classification of mobile cranes and related crane mechanisms based on the number of operating cycles to be carried out during the expected life of the mobile crane or mechanism and on a load spectrum factor which represents a nominal state of loading. It applies to basic types of self-propelled mobile cranes and their parts as defined in ISO 4306/2.
Lifting appliances - Classification - Part 2: Mobile cranes
この規格は,JIS B 8802, JIS B 8819, JIS B 8815, JIS C 9620, JIS B 8813の巻上機(以下,巻上機という。)の定格荷重について規定する。
Lifting equipments -- Capacities
标准化规定了防爆钢丝绳电动葫芦的分类、技术要求、试验、检验规则及标志、包装、运输、贮存等内容。 本标准用于煤矿井下(Ⅰ类)和工厂(Ⅱ类)在有爆炸性气体环境中工作的防爆葫芦。 本标准不适用于在爆炸性粉尘环境中工作的防爆葫芦。
Specification for explosion-proof electric wire rope hoists
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号