71.080.01 有机化学综合 标准查询与下载

GB/T 18825-2002 工业用环戊烷

本标准规定了工业用环戊烷的要求、试验方法、检验规则及标志、包装、运输、贮存和安全。 本标准适用于以工业石脑油、轻柴油裂解加氢经过精馏得到的环戊烷。该产品替代一氟三氯甲烷（CFC－11），主要用作聚氨酯发泡剂。 分子式：CH 相对分子质量：70.134（按1999年国际相对原子质量）

Cyclopentane for industrial use

ASTM E1064-24 用库仑卡尔费休滴定法测定有机液体中水含量的标准试验方法

Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

T/NAIA 0273-2023 二乙烯基苯

本文件规定了工业用二乙烯基苯（简称DVB）的技术要求、试验方法、检验规则、标志、包装、运输和贮存，适用于二乙基苯经脱氢、精馏等工艺过程而制得的工业用二乙烯基苯。

divinylbenzene

T/NAIA 0275-2023 氯乙酰氯

本文件规定了氯乙酰氯的要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于工业氯乙酰氯的生产和质量控制。该产品是一种重要的农药中间体，广泛应用于农药、医药等。

Chloroacetyl chloride

T/NAIA 0276-2023 三氯乙酰氯

本文件规定了三氯乙酰氯的技术要求、试验方法、检验规则、标志、包装、运输、贮存。   本文件适用于三氯乙酰氯的工业化生产质量控制。

Trichloroacetyl chloride

T/NAIA 0274-2023 反式-1，2-二氯乙烯

本文件适用于反式-1，2-二氯乙烯的工业化生产。规定了反式-1，2-二氯乙烯的技术要求、试验方法、检验规则、包装、标志、运输、贮存要求。

trans-1,2-dichloroethylene

T/GAIA 020-2023 水溶性有机化合物中氯、溴、碘元素总量的测定 电感耦合等离子体发射光谱法

本文件规定了采用电感耦合等离子体原子发射光谱法（ICP-OES）测定水溶性有机化合物中氯、溴、碘元素的总量。 本文件适用于水溶性有机化合物中氯、溴、碘元素总量的测定，适用于对有含氯、溴、碘水溶性有机化合物进行纯度表征和质量控制。

Determination of chlorine, bromine and iodine in water-soluble organic compound by inductively coupled plasma-optical emission spectrometry

T/CPCIF 0323-2023 工业用1,3-环己二甲胺

本文件规定了工业用1,3-环己二甲胺的技术要求、试验方法、检验规则、标志、包装、运输和贮存。

1,3-Cyclohexanedimethanamine for industrial use

T/CPCIF 0324-2023 工业用间苯二甲胺

本文件规定了工业用间苯二甲胺的技术要求、试验方法、检验规则、标志、包装、运输和贮存。

m-Xylylenediamine for industrial use

T/ACIA 003-2023 4-三氟甲基烟酸

本文件规定了4-三氟甲基烟酸的要求、试验方法、检验规则、标志、包装、运输和贮存。

4-(trifluoromethyl)nicotinic acid

T/ACIA 004-2023 对甲苯磺酸钾

本文件规定了对甲苯磺酸钾的要求、试验方法、检验规则、标志、包装、运输和贮存。

potassium,4-methylbenzenesulfonate

T/ACIA 005-2023 甲基磺酸钠

本文件规定了甲基磺酸钠的要求、试验方法、检验规则、标志、包装、运输和贮存。

Sodium methanesulfonate

T/SDEPI 039-2023 再生工业 1，2-二氯乙烷

本文件规定了再生工业1，2-二氯乙烷的质量要求、检验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以含1，2-二氯乙烷危险废物为原料，采用精馏工艺回收1，2-二氯乙烷产品的生产、检验和销售，该产品只适用于涂装、建材、橡胶、塑料等工业领域。 分子式：CH2ClCH2Cl 分子量：98.95（按2018年国际相对原子质量）。

Regeneration industry 1,2-dichloroethane

T/SDEPI 038-2023 再生工业二氯甲烷

本文件规定了再生工业二氯甲烷质量要求、检验方法、检验规则、标志、包装和运输、贮存。 本文件适用于以含二氯甲烷的危险废物为原料，采用精馏工艺回收再生工业二氯甲烷的生产、检验和销售，该产品只适用于涂装、建材、塑料、染料等工业领域。 分子式：CH2CI2 分子量：84.93（按2007年国际相对原子质量）

Recycled industrial dichloromethane

ASTM D5236-23 重质烃混合物蒸馏的标准试验方法（真空蒸馏法）

Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

T/CASME 480-2023 高分子量苯乙烯-马来酸酐共聚物

本文件规定了高分子量苯乙烯-马来酸酐共聚物的术语和定义、分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。

High molecular weight styrene - maleic anhydride copolymers

T/CIESC 53-2023 工业用乙酰丁二酸二甲酯

本文件规定了工业用乙酰丁二酸二甲酯的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于顺丁烯二酸二甲酯经过乙醛酰化制得的乙酰丁二酸二甲酯。主要应用领域是合成染料、食用色素等的生产。

Dimethyl acetylsuccinate for industrial use

ASTM E659-15(2023) 化学品自燃温度的标准试验方法

1.1 This test method covers the determination of hotand cool-flame autoignition temperatures of a liquid chemical in air at atmospheric pressure in a uniformly heated vessel. NOTE 1—Within certain limitations, this test method can also be used to determine the autoignition temperature of solid chemicals which readily melt and vaporize at temperatures below the test temperature and for chemicals that are gaseous at atmospheric pressure and temperature. NOTE 2—After a round robin study, Test Method D2155 was discontinued, and replaced by Test Method E659 in 1978. See also Appendix X2. 1.2 This standard should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Autoignition Temperature of Chemicals

ASTM D611-23 石油产品和烃类溶剂的苯胺点和混合苯胺点的标准试验方法

1.1 These test methods cover the determination of the aniline point of petroleum products and hydrocarbon solvents. Test Method A is suitable for transparent samples with an initial boiling point above room temperature and where the aniline point is below the bubble point and above the solidification point of the aniline-sample mixture. Test Method B, a thin-film method, is suitable for samples too dark for testing by Test Method A. Test Methods C and D are for samples that may vaporize appreciably at the aniline point. Test Method D is particularly suitable where only small quantities of sample are available. Test Method E describes a procedure using an automatic apparatus suitable for the range covered by Test Methods A and B. 1.2 These test methods also cover the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 WARNING—Mercury has been designated by many regulatory agencies as a hazardous substance that can cause serious medical issues. Mercury, or its vapor, has been demonstrated to be hazardous to health and corrosive to materials. Use caution when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for additional information. The potential exists that selling mercury or mercury-containing products, or both, is prohibited by local or national law. Users must determine legality of sales in their location. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific warning statements are given in Section 7. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

ASTM D6875-23 用热敏电阻测定工业有机化学品凝固点的标准试验方法

1.1 This test method covers a general procedure for determining the solidification point of most organic chemicals having appreciable heats of fusion and solidification points between 4 °C and 41 °C. NOTE 1—Other test methods for determining freeze point and solidification point of aromatic hydrocarbons include Test Methods D852, D1015, D1016, D3799, D4493, and D6269. 1.2 This test method is applicable to relatively pure compounds only. Solidification point depression is dependent on impurity concentrations. 1.3 The following applies to all specified limits in this test method: for purposes of determining conformance with applicable specifications using this test method, an observed value or a calculated value shall be rounded off “to the nearest unit” in the last right hand digit used in expressing the specification limit, in accordance with the “rounding-off method” of Practice E29. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For a specific hazard statement, see Section 8, Hazards. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor