75.140 石蜡、沥青材料和其他石油产品 标准查询与下载

KS F 2367-2022 压实沥青铺路混合料试件厚度或高度的测试方法

Testing method for thickness or height of compacted asphalt paving mixture specimens

KS F 2338-2022 用于机场和公路路面评估和设计的土壤和柔性路面构件的重复静态板载荷试验的测试方法

Testing method for repetitive static plate load tests of soils and flexible pavement components, for use in evaluation and design of airport and highway pavements

KS F 2380-2022 用沸水测试沥青涂层骨料抗剥落性的试验方法

Testing method for stripping resistance on bituminous-coated aggregate using boiling water

KS F 2339-2022 用于机场和公路路面评估和设计的土壤和柔性路面构件的非重复静态板载荷试验的试验方法

Testing method for nonrepetitive static plate load tests of soils and flexible pavement components for use in evaluation and design of airport and highway pavements

KS F 2337-2022 使用马歇尔装置测定沥青混合料马歇尔稳定性和流动性的测试方法

Testing method for marshall stability and flow of asphalt mixtures using marshall apparatus

KS F 2353-2022 压实沥青混合物比重的标准试验方法

Standard test method for specific bulk gravity of compacted asphalt mixtures

ASTM D5515-22 用膨胀计测定烟煤膨胀特性的标准试验方法

1.1 This test method specifies a procedure for the measurement of the swelling of bituminous coal using a dilatometer. 1.2 The test method is limited in applicability to those coals which have a free swelling index ≥1 as determined in accordance with Test Method D720. 1.3 Units—The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

T/ZGTS 004-2022 石墨电极接头用油系针状焦

本标准规定了高功率、超高功率石墨电极接头用油系针状焦的技术要求、试验方法、检验规则、包装、运输、贮存和质量证明书等。

Oil-based needle coke for graphite electrode nipple

T/ZGTS 002-2022 石墨电极本体用油系针状焦

本标准规定了高功率、超高功率石墨电极本体用油系针状焦的技术要求、试验方法、检验规则、包装、运输、贮存和质量证明书等。

Oil-based needle coke for graphite electrode body

T/CWA 210-2022 沥青用耐高温添加剂

1　范围 2　规范性引用文件 3　术语和定义 4　标记 5　要求 6　试验方法 7　检验规则 8　标志、包装、运输和贮存 附录A（规范性附录）  耐高温沥青制备方法

High temperature resistant additive for asphalt

ASTM D4715-98(2022)e1 焦油和沥青（Alcan）焦化值的标准试验方法

1.1 This test method covers the determination of the coking value of tar and pitch having an ash content not over 0.5 %, as determined by Test Method D2415. 1.2 Coking values by this test method are higher than those obtained by Test Method D2416. See the bias statement in Section 13. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Coking Value of Tar and Pitch (Alcan)

ASTM D2320-98(2022)e1 固体沥青密度（相对密度）的标准试验方法（比重瓶法）

1.1 This test method covers the determination of density and relative density by pycnometer, and can be used for pitch that can be handled in fragments. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

T/CPCIF 0206-2022 农药用矿物油

项    目　要  求 密度（20 ℃）/（kg/m3）　报告 赛波特颜色号                                       不低于　＋30 闪点（开口）/ ℃                                     不低于　160 运动黏度（40 ℃）/（mm2/s）　报告 倾点 / ℃                                            不高于　－30 硫含量 /（mg/kg）                                   不大于　1.0 芳烃含量（质量分数）/ %                             不大于　0.01 稠环芳烃（紫外吸光度260 nm～420 nm）               不大于　0.1 非磺化物含量（体积分数）/ %                         不小于　95 相对正构烷烃碳数差                                 不大于　8 相对正构烷烃平均碳数　21～24 水溶性酸或碱　无 重金属（以Pb计）/（mg/kg）                         不大于　10 铅（Pb）含量 /（mg/kg）                             不大于　1 砷（As）含量 /（mg/kg）                             不大于　1

Mineral oil for pesticides

GSO ISO 6244:2022 石油蜡和凡士林 滴熔点的测定

May be used to measure the melting acharacteristics of petrolatums and other high viscosity petroleum waxes. Additional methods used are given in ISO 3841 and ISO 2207. Results obtained may differ, depending on the method used. For pharmaceutical petrolatum, the use of this procedure is usually preferred. In the annex, the specification for thermometers is given.

Petroleum waxes and petrolatums — Determination of drop melting point

GSO 551:2022 沥青材料延展性试验方法

1.1 This Gulf Standard concerned with the procedure for determin¬ing the ductility of an asphalt material measured by the distance to which it will elongate before breaking when two ends of a briquet specimen of the material, of the form described in (4.1), are pulled apart at a specified speed and at a specified temperature. Unless otherwise specified, the test shall be made at a temperature of 25 ± 0.5 °C [77 ± 0.9 °F] and with a speed of 5 cm/min ± 5.0 %. At other temperatures, the speed should be specified. 1.2 Because of the large number of methods for obtaining test samples, it is impractical to discuss specific products in this test method. Refer to individual product specifications for guidance in obtaining a test sample. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro- priate safety, health, and environmental practices and deter- mine the applicability of regulatory limitations prior to use. 1.4 This standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Method for ductility of Asphalt materials

GSO ASTM D850:2022 工业芳烃及相关材料蒸馏的标准试验方法

1.1 This test method covers the distillation of industrial aromatic hydrocarbons and related materials of relatively narrow boiling ranges from 30 to 250°C. 1.2 The following applies to all specified limits in this test method: for the purposes of determining conformance to this test method, an observed or calculated value shall be rounded off “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E29. 1.3 Warning—Mercury has been designated by EPA and many state agencies as a hazardous material that can cause central nervous system, kidney and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercury-containing products. See the applicable product Safety Data Sheet (SDS) for details and EPA’s website (http:// www.epa.gov/mercury/faq.htm) for additional information. Users should be aware that selling mercury or mercurycontaining products, or both, in your state may be prohibited by state law. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials

GSO 550:2022 沥青材料的针入度试验方法

1.1 This Gulf Standard specifies a method of determining penetration of semi-solid and solid bituminous materials. 1.2 The needles, containers, and other conditions described in this test method provide for the determinations of penetrations up to 500. NOTE (1): See the section on Penetration of Test Methods (ASTM D244) for information and precision and bias on testing emulsion residue. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and deter- mine the applicability of regulatory limitations prior to use. 1.4 This standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Test Method for Penetration of Bituminous Materials

ASTM D6521-22 使用加压老化容器（PAV）加速沥青粘合剂老化的标准实施规程

1.1 This practice covers the conditioning of asphalt binders to simulate accelerated aging (oxidation) by means of pressurized air and elevated temperature. This is intended to simulate the changes in rheology which occur in asphalt binders during in-service oxidative aging, but may not accurately simulate the relative rates of aging. It is normally intended for use with residue from Test Method D2872 (RTFOT), which is designed to simulate plant aging. NOTE 1—PAV conditioning has not been validated for materials containing particulate materials. 1.2 The aging of asphalt binders during service is affected by ambient temperature and by mixture-associated variables, such as the volumetric proportions of the mix, the permeability of the mix, properties of the aggregates, and possibly other factors. This conditioning process is intended to provide an evaluation of the relative resistance of different asphalt binders to oxidative aging at selected elevated aging temperatures and pressures, but cannot account for mixture variables or provide the relative resistance to aging at in-service conditions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard NOTE 2—The quality of the results produced by this standard are dependent on the competence of the personnel performing the procedure and the capability, calibration, and maintenance of the equipment used. Agencies that meet the criteria of Specification D3666 are generally considered capable of competent and objective testing, sampling, inspection, etc. Users of this standard are cautioned that compliance with Specification D3666 alone does not completely ensure reliable results. Reliable results depend on many factors; following the suggestions of Specification D3666 or some similar acceptable guideline provides a means of evaluating and controlling some of those factors. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

KS F 2369-2022 修补材料用冷拌沥青

Cold mix asphalt for patching materials

KS F 2490-2022 用点火法测定热拌沥青中沥青含量的标准试验方法

Standard test method for asphalt content of hot-mix asphalt by ignition method