75.140 石蜡、沥青材料和其他石油产品 标准查询与下载

T/CIPR 025-2022 再生沥青混合料的制备方法

    通过控制废旧沥青混合料、新沥青以及新集料的用量比例，有利于新旧沥青更好地互相混合均匀，从而有利于提高混合所得的再生沥青混合料的抗压强度以及抗疲劳性，进而有利于扩大再生沥青混合料的适用范围，有利于更好地节约资源，使得经济效益提高。     通过采用N-甲基-1-[1-(2-噻吩基甲基)-4-哌啶基]甲胺、水杨酸肟酸与邻硝基十二烷醚互相协同配合，有利于旧沥青与旧集料更好地分离，同时，还有利于提高旧沥青、旧 集料与新沥青、新集料的相容性，使得新旧沥青以及新旧集料更加容易混合均匀，从而有利于更好地提高混合所得的再生沥青混合料的抗压强度以及抗疲劳性，进而有利于扩大再生沥青混合料的适用范围，有利于更好地节约资源，使得经济效益提高。

Preparation method of recycled asphalt mixture

JIS K 2235:2022 石油蜡

Petroleum waxes

T/CIPR 024-2022 透水沥青的制备方法

在透水沥青中单独加入加入噻虫嗪及聚苊均对透水沥青的性能无明显影响，但在透水沥青中以同时加入噻虫嗪及聚苊并以特定比例与沥青配合，有效提高透水沥青的抗冻性能，使得透水沥青的脆点温度下降，从而使得透水沥青更适用于寒冷地区，在气温较低时，不易导致强度下降，从而使得透水沥青制备的道路在气温较低时结构稳定性。

Preparation of permeable asphalt

T/CIPR 023-2022 沥青混合料及其制备方法

通过在沥青混合料中加入乙醇碲与联苯二碲，并且乙醇碲、联苯二碲与沥青以特定比例配合，有效提高沥青混合料的抗车辙性能，使得采用沥青混合料铺设路面时，路面不易变形，不易出现车辙，有效提高路面的使用寿命及稳定性。

Asphalt mixture and its preparation method

T/CIPR 022-2022 环保沥青混合料及其制备方法

通过加入硅烷偶联剂，使得沥青与各无机材料连接更为稳定，从而使得沥青混合料的结构稳定性更佳。

Environmental friendly asphalt mixture and its preparation method

KS M 2201-2021 直沥青

Straight asphalt

KS M 2203-2021 乳化沥青

Emulsified asphalt

ASTM D5581-07A(2021)e1 用马歇尔仪（6英寸直径试样）测定沥青混合料抗塑性流动性的标准试验方法

1.1 This test method covers the measurement of the resistance to plastic flow of cylindrical specimens of bituminous paving mixture loaded on the lateral surface by means of the Marshall apparatus. This test method is for use with mixtures containing asphalt cement and aggregate up to 11⁄2 in. (37.5 mm) nominal maximum size. 1.2 The values stated in inch-pound units are to be regarded as standard except for reference to sieve sizes and size of aggregate as measured by testing sieves in which SI units are standard according to Specification E11. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)

ASTM D4924-21 橡胶复合用石油蜡的标准分类

1.1 This classification is intended to establish a classification system and test methods for petroleum waxes used in rubber compounding primarily as a static protective agent or material for unsaturated rubbers such as styrene-butadiene rubber, polyisoprene rubber, natural rubber, chloroprene rubber, acrylonitrile-butadiene rubber, and polybutadiene rubber. These unsaturated rubbers are subject to ozone cracking. Under certain exposure conditions, waxes retard this cracking. 1.2 This classification is applicable to petroleum waxes used as process aids in rubber compounding. It is not applicable to nonpetroleum waxes such as carnuba wax, candelille wax, or ceresin wax, nor to synthetic hydrocarbon waxes such as polyethylene wax. These non-petroleum waxes display a different behavior on gas chromatographic analysis than do petroleum waxes. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Petroleum Waxes for Use in Rubber Compounding

ASTM D6084/D6084M-21 用伸缩仪测定沥青材料弹性恢复的标准试验方法

1.1 This test method assesses the elastic recovery of an asphalt material measured by the recoverable strain determined after severing an elongated briquet specimen of the material of the form described in 4.1. The specimens are pulled to a specified distance at a specified speed and at a specified temperature. Unless otherwise specified, the test shall be made at a temperature of 25 6 0.5 °C [77 6 0.9 °F] and with a speed of 5 cm/min 6 5 %. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.3 Warning—Mercury has been designated by the United States Environmental Protection Agency and many state agencies as a hazardous material that can cause central nervous system, kidney, and liver damage. Mercury, or its vapor, may be hazardous to health and corrosive to materials. Caution should be taken when handling mercury and mercurycontaining products. See the applicable Material Safety Data Sheet (MSDS) for details and EPA’s website (http:// www.epa.gov/mercury/index.htm) for additional information. Users should be aware that selling mercury and/or mercurycontaining products in your state may be prohibited by state law. 1.4 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer

KS M 2202-2021 稀释沥青

Cutback asphalt

KS M 2051-2021 润滑脂工作稳定性试验方法

Testing method for working stability of lubricating grease

KS M 2052-2021 润滑油脂中矿物油含量的分析方法

Analysing method for mineral oil content in lubricating grease

ASTM D5442-17(2021) 用气相色谱法分析石油蜡的标准试验方法

1.1 This test method covers the quantitative determination of the carbon number distribution of petroleum waxes in the range from n-C17 through n-C44 by gas chromatography using internal standardization. In addition, the content of normal and non-normal hydrocarbons for each carbon number is also determined. Material with a carbon number above n-C44 is determined by its difference from 100 % by mass and reported as C45+. 1.2 This test method is applicable to petroleum derived waxes, including blends of waxes. This test method is not applicable to oxygenated waxes, such as synthetic polyethylene glycols (for example, Carbowax2 ), or natural products such as beeswax or carnauba. 1.3 This test method is not directly applicable to waxes with oil content greater than 10 % as determined by Test Method D721. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

BS 9228:2021 使用乳化沥青、泡沫沥青或液压材料回收道路和其他铺砌区域 材料、生产、安装和产品类型测试 规格材料、生产、安装和产品型式试验规范

Recycling of roads and other paved areas using bitumen emulsion, foamed bitumen or hydraulic material. Materials, production, installation and product type testing. Specification. Specification for materials, production, installation and product type test

T/CBMF 115-2021 防水卷材用沥青

本文件规定了防水卷材用沥青的术语和定义、分类与标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于以石油为原料制备的，用于生产防水卷材的沥青。

Asphalt for waterproofing membranes

T/GDES 60-2021 绿色设计产品评价技术规范 工业白油

本文件规定了绿色设计产品工业白油的评价要求、生命周期评价报告编制方法和评价方法。 本文件适用于工业白油绿色设计产品评价。

Technical specification for green-design product assessment— Technical grade white oil

KS F 2360-2021 沥青集料混合料颗粒包覆度试验方法

Testing method for degree of particle coating of asphalt-aggregate mixture

KS F 2377-2021 旋转压实机配制并测定热拌沥青混合料密度的试验方法

Test method for preparing and determining density of hot?mix asphalt mixture by means of the gyratory compactor

KS F 2488-2021 改性沥青结合料韧性和韧性的标准试验方法

Standard test method for toughness and tenacity of modified asphalt binder