77.180 冶金设备 标准查询与下载

YB/T 6089-2023 连铸坯火焰切割机

本文件规定了连铸坯火焰切割机的术语和定义、组成、分类、型号、基本参数、技术要求、安全环保要求、试验方法、检验规则、标志、包装、运输和贮存。本文件适用于以工业气体为燃气介质切割连铸坯的火焰切割机，即可配置为定尺（倍尺）坯、试样坯切割，切头、切尾的在线连铸坯火焰切割机，也可配置为完成短定尺坯、冷坯、废料坯等切割的离线火焰切割机。其他相关的火焰切割机亦可参照使用。

Continuous casting slab flame cutting machine

T/CHBAS 29-2023 双金属复合耐磨材料铸件

本文件规定了双金属复合耐磨材料铸件（以下简称铸件）的分类、牌号和代号、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于建材、电力、冶金、矿山和机械等行业的双金属铸件。其它用途的双金属铸件参照使用。

Bimetal composite wear-resistant material casting

ISO 4529:2023 工业炉和相关加工设备.二次炼钢.液态钢处理机械和设备

This document: — specifies the general safety requirements for secondary steelmaking machinery and equipment (SSME) as defined in 3.1 to treat liquid steel; — deals with all significant hazards, hazardous situations and events pertinent to SSME, when used as intended and under conditions foreseen by the manufacturer, but also includes foreseeable misuse, faults and malfunctions; — specifies the requirements to ensure the safety of persons which are to be met during the design, pre-assembly, transport, sites assembly, commissioning, operation, maintenance, decommissioning and dismantling/ disassembling of the equipment; — assumes that SSMEs are operated and maintained by adequately trained and competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of the equipment. This document applies to SSME involved in the treatment process of liquid steel under vacuum or atmospheric pressure and covers: — LF, ladle furnace, — VD, vacuum degassing, — VOD, vacuum oxygen decarburization, — RH (OB), Ruhrstahl Heraeus (oxygen blowing), — process related interfaces/interactions (e.g. according to design, controls) to: a) process media, b) primary and secondary gas cleaning plant, c) material handling systems, d) transfer cars for steel ladle, and e) crane and ladle. NOTE 1 Due to the variety of secondary metallurgical processes, there are other variants (e.g. VODC – vacuum oxygen decarburization converter, CAS, CAS - OB) in addition to the main processes discussed in this document. Most countries require that applicable safety requirements, specific to this equipment be implemented. This document does not cover safety requirements for the following equipment: — cranes; — transfer cars, e.g. ladle transfer cars, tank cars, maintenance cars; — fork lift trucks or other transporting equipment; 1 — ladles; — equipment for relining and preheating in the relining area; — burners according to ISO 13577-2 (the burner lances for RH vessels are covered by ISO 13577-2 except for maximum main burner ignition time, see 5.2.26.2); — cleaning and treatment of dust and fume exhaust systems; — process media (e.g. air separation, boiler house, steam generation system); — material handling systems. NOTE 2 Significant hazards and hazardous situations due to transporting/positioning of heavy components, e.g. by cranes (e.g. ladles, vessels, covers) are considered in this document (see 5.2.3). This document is not applicable to SSMEs and associated equipment manufactured before the date of its publication.

Industrial furnaces and associated processing equipment — Secondary steelmaking — Machinery and equipment for treatment of liquid steel

T/YNBX 083-2023 超声波溶液处理反应发生装置

本文件规定了超声波溶液处理反应发生装置的结构、元部件和材料要求、仪器仪表和自动控制要求、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本文件适用于化工、冶金、环保、医药等领域进行溶液强化反应和净化反应的超声波溶液处理反应发生装置。

Ultrasonic solution processing reaction generator

JB/T 14248-2022 铝带150mm重剪 技术规范

Technical specification for heavy cutting of aluminum strip to 150mm

JB/T 14244-2022 热连轧机组 飞剪减速机

Hot strip rolling mill flying shear reducer

JB/T 14251-2022 中厚铝板四辊热轧机 技术规范

Technical specifications for four-roller hot rolling mill for medium-thick aluminum plates

JB/T 14243-2022 热连轧机组 定宽压力机 通用技术规范

General technical specifications for fixed-width presses in hot tandem rolling mills

JB/T 14250-2022 铝带热精轧机 技术规范

Technical Specifications for Hot Finishing Rolling Mills for Aluminum Strips

JB/T 14245-2022 热连轧机组 快速换辊机 通用技术规范

General technical specifications for quick roll changer of hot tandem rolling mills

JB/T 14249-2022 铝带切边剪和碎边剪 技术规范

Technical Specifications for Aluminum Strip Trimming Shears and Shredded Edge Shears

YB/T 6033-2022 冶金轧机机架在线修复技术规范

本文件规定了冶金轧机机架在线修复的术语和定义、失效部位和表现形式、修复方法、技术要求、检验方法、检验规则、防护及应提交的技术资料。 本文件适用于冶金轧机机架的在线修复，亦适用于类似冶金设备的在线修复。

Technical Specifications for Online Repair of Metallurgical Rolling Mill Stands

YB/T 6034-2022 冶金轧机轴承座修复技术规范

本文件规定了冶金轧机轴承座修复的术语和定义、失效部位和表现形式、技术要求、检验方法、检验规则、包装、运输、贮存及应提交的技术资料。 本文件适用于冶金轧机轴承座的修复，亦适用于类似轴承座的修复。

Technical Specification for Repair of Bearing Seats of Metallurgical Rolling Mills

YB/T 6035-2022 金属带材开卷机卷筒与卷取机卷筒修复技术规范

本文件规定了金属带材开卷机卷筒与卷取机卷筒修复的术语和定义、失效形式、修复方法、技术要求、检验方法、标志、包装、运输及贮存。 本文件适用于金属带材开卷机卷筒和卷取机卷筒的修复，其他类似卷筒的修复亦可参照使用。

Technical specification for repair of metal strip uncoiler drums and coiler drums

T/HEBQIA 090-2022 铁素体耐热钢烧结机篦条

本文件规定了铁素体耐热钢烧结机篦条的技术要求、生产工艺、试验方法、检验规则、标志、包装、订货条件等。

Ferritic heat-resistant steel sintering machine grate

BS EN 15061:2022 机械安全 带钢加工线机械设备安全要求

1   Scope This document defines the general safety requirements of strip processing lines . This document applies to: Strip processing lines for treating metal strip , from — coil take-over-point of the entry section ( terminal equipment , see 3.2) through the — process (processing and terminal equipment , see 3.3 and 3.2) up to the — coil take-over-point of the exit section or interface to other lines ( terminal equipment ), see Figure 1. Figure 1 — Terminal and processing equipment NOTE 1 The aforementioned processes can also occur in combination. If the aforementioned processes will be combined with processes which are not covered by the scope of this document, this document can be used as a guideline.

Safety of machinery. Safety requirements for strip processing line machinery and equipment

T/HEBQIA 086-2022 冶金连铸机辊系再制造技术规范

本文件规定了冶金连铸机辊系再制造性能评估、缺陷处理、辊系装配要求、检验方法、验收及运输。

Technical specification for remanufacturing of metallurgical continuous casting machine roll system

T/SSEA 0202-2022 锂电池极片轧机轧辊

本文件规定了锂电池极片轧机用轧辊的技术要求、试验方法、检验规则、标记、包装、运输和储存。 本文件适用于锂电池极片轧机用轧辊（以下简称轧辊）。

Lithium battery pole piece rolling mill roll

T/CISA 236-2022 钢铁企业润滑管理导则

本文件规定了钢铁企业设备润滑管理的术语和定义、基本要求、重点设备润滑剂选择、润滑剂贮存要求、润滑剂加换要求、设备润滑监测、循环系统污染控制、废油管理以及健康、安全、环保等要求。 本文件适用于钢铁企业焦化、烧结、炼铁、炼钢、轧钢等主要生产流程中的润滑管理。

Guidelines of lubrication management for steel enterprise

T/CISA 237-2022 钢铁企业润滑油在线监测技术导则

       本文件规定了钢铁行业设备油液在线监测系统的术语和定义、总则、系统组成、监测指标选择原则、技术要求，系统的试验、调试和验收等内容。        本文件适用于钢铁行业设备稀油集中润滑系统、液压系统的在线油液监测。

Technical guidelines for oil on-line monitoring in steel enterprise