81.040.30 玻璃产品 标准查询与下载

T/QXBQ 0008-2023 玻璃色拉碗

本文件规定了玻璃色拉碗的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。 本文件适用于人工吹制或机械制造的盛放果蔬饮食类的碗状玻璃容器。

glass salad bowl

T/BYXT 005.11-2023 稀土抗抑菌应用材料 第11部分：玻璃

1抗抑菌要求 1 产品牌号、抗抑菌基础材料载锌抗抑菌粉组分及方法，应符合下表 的要求。  产品牌号、抗抑菌材料组分及方法 产品牌号　产品名称　载锌抗抑菌粉a含量（质量分数/%）　组分方法 REA-GLASS01-2Nb　稀土抗抑菌平板玻璃　0.1?5　掺混法 REA-GLASS02-2N　稀土抗抑菌船用钢化安全玻璃　　 REA-GLASS03-2N　稀土抗抑菌滤光玻璃　　 REA-GLASS04-2N　稀土抗抑菌半钢化玻璃　　 REA-GLASS05-2N　稀土抗抑菌液晶显示器用薄浮法玻璃　　涂覆法 REA-GLASS06-2N　稀土抗抑菌温度计用玻璃　　掺混法 REA-GLASS07-2N　稀土抗抑菌隔热涂膜玻璃　　涂覆法 REA-GLASS08-2N　稀土抗抑菌彩晶装饰玻璃　　 REA-GLASS09-2N　稀土抗抑菌电磁屏蔽玻璃　　掺混法 REA-GLASS10-2N　稀土抗抑菌航空用铝硅玻璃　　 REA-GLASS11-2N　稀土抗抑菌轻质物理强化玻璃　　 REA-GLASS12-2N　稀土抗抑菌淋浴房玻璃　　涂覆法 REA-GLASS13-2N　稀土抗抑菌抗污易洁涂膜玻璃　　 REA-GLASS14-2N　稀土抗抑菌动车组用中空玻璃　　 REA-GLASS15-2N　稀土抗抑菌贴膜玻璃　　 REA-GLASS16-2N　稀土抗抑菌化学钢化玻璃　　掺混法 a   稀土抗抑菌基础材料载锌抗抑菌粉，应符合T/BYXT 003.1-2022第4章的要求。 b  产品牌号参考GB/T 17803的表示方法，第一层用稀土抗抑菌（Rare earth antibacterial）首字母“REA”表示；第二层“GLASS01”表示分类号为01的玻璃产品（“GLASS”为玻璃的英文名称）；第三层“2N”表示抗抑菌率为99%（2为“9”的个数，“N”为数字“9”的英文首字母）。 2 产品抗抑菌性能指标，应符合下表的要求。  产品抗抑菌性能指标要求 项目　抑菌率　抗菌率　新冠病毒抑制率　防霉等级 指标　90.00%～99.99%　90.00%～99.99%　90.00%～99.99%　0级～1级 注：稀土抗抑菌涂料应根据产品对抗抑菌功能的需求，选择相应的抗抑菌功能项目，应符合5.2的要求。

Rare earth antibacterial Intermediate materials Part 11：Glass

ASTM C1606-10(2023) 容器玻璃器皿TCLP试验用取样方案的标准试验方法

1.1 This test method defines the way in which container glassware should be prepared before performing the Toxicity Characteristic Leaching Procedure (TCLP). The method covers the homogenization of the sample, and the selection of a representative portion of the sample to test and get reproducible results. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

T/SXJP 024-2023 药用玻璃管

4　技术要求 4.1 规格尺寸 4.2 外观 4.2.1  裂纹 4.2.2  气泡线 4.2.3  结石和节瘤 4.2.4  擦伤 4.2.5  管端精切、圆口 4.2.6  其他缺陷 4.3  121℃ 玻璃颗粒法耐水性 4.4  透光率 4.5  砷、锑、铅、镉溶出量

Medicinal glass tube

T/ZBH 023-2023 建筑外装饰用琉璃板

本文件规定了建筑外装饰用琉璃板的分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于不含氧化铅的建筑外装饰用琉璃板。

Glaze panel for exterior decoration

T/ZBH 022-2023 薄膜太阳能电池用FTO导电玻璃

本标准规定了薄膜太阳能电池用FTO导电玻璃的术语和定义、总则、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于经物理、化学镀膜工艺制造的薄膜太阳能电池用FTO导电玻璃。其他用途应用可参照本标准使用。

Transparent conductive oxide (SnO2:F) glassfor Thin-film solar cells

DB35/T 2089-2022 玻璃抗菌处理工艺要求

本文件规定了玻璃抗菌处理工艺的设备、场所、技术文件、原材料、生产工艺、安全卫生、环保和保洁等要求。 本文件适用于采用离子交换工艺的抗菌玻璃的生产与维护。

Glass antibacterial treatment process requirements

DB13/T 5631-2022 电子专用材料单晶硅生长用石英坩埚生产技术规范

Technical specifications for the production of quartz crucibles for the growth of single crystal silicon for electronic materials

T/ZZB 2870-2022 电致变色防眩目后视镜镜片

本文件规定了电致变色防眩目后视镜镜片的术语和定义、分类与结构型式、基本要求、技术要求、试验方法、检验规则、包装、标志、运输和贮存、质量承诺。 本文件适用于通过外加电场作用，使车辆后视镜在眩目光强和环境光强发生变化时能自动调节反射率的玻璃镜片。

Electrochromic anti-glare rearview mirror

T/SCS 000017-2022 日用工艺玻璃

本标准设置了日用工艺玻璃的“范围”、“规范性引用文件”、“术语和定义”、“分类”、“要求”、“试验方法”、“检验规则”、“标志、包装、运输和贮存”共8章。

Craft glass for domestic use

T/ZBH 021-2022 建筑用玻璃隔声技术条件

本文件规定了建筑用玻璃隔声性能的术语和定义、分类、标记、要求和检测。 本文件适用于建筑用玻璃隔声性能分级及检测。其他有隔声要求的玻璃可参照使用。

The technical specification of sound insulating glass for building

JC/T 2686-2022 玻璃轻石

本文件规定了玻璃轻石的分类、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于水环境治理、建筑与市政工程、土壤改良等用途的玻璃轻石。

glass pumice

JC/T 2708-2022 真空玻璃传热系数检测方法

本文件规定了基于防护热板法原理测量真空玻璃传热系数的方法，包括术语和定义、测试原理及装置、试样要求、测试、计算与结果表达、测试报告。 本文件适用于平型真空玻璃传热系数的测量。

Testing method for heat transfer coefficient of vacuum glass

T/BSLLSH 001-2022 博山琉璃工艺制品

博山琉璃工艺制品 1  范围 本标准规定了琉璃工艺品的术语与定义、分类与标记、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于以水晶玻璃为原料通过吹制、灯工、脱蜡铸造、压制等工艺制成或在常温研磨加工等冷加工成型的琉璃制品（以下简称产品）。 2  规范性引用文件 下列文件对于本文件的应用是必不可少的。凡是注日期的引用文件，仅所注日期的版本适用于本文件。凡是不注日期的引用文件，其最新版本（包括所有的修改单丿适用于本文件。 GB/T 191-2008 包装储运图示标志. GB/T 2828.1-2012 计数抽样检验程序第一部分：按接收质量限（AQL）检索的逐批检验抽样计划 GB28480 铅和镉的限量要求 GB/T 2829-2002 周期检验计数抽样程序及表（适用于对过程稳定性的检验）                3  术语与定义 下列术语与定义适用于本标准。 3.1 颜色 包含无色及彩色玻璃。 3.2 制品 适用于釆用吹制、灯工、脱蜡铸造、压制等热工工艺生产的艺术品、工艺摆饰品、工艺玻璃器皿、玻璃挂饰品（包含结合金属饰品）以及采用上述材料在常温研磨加工等冷加工成型的制品。

Boshan glass craft products

ASTM C225-85(2022) 玻璃容器耐化学侵蚀性的标准试验方法

1.1 These test methods cover the evaluation of the resistance of glass containers to chemical attack. Three test methods are presented, as follows: 1.1.1 Test Method B-A covers autoclave tests at 121 °C on bottles partially filled with dilute acid as the attacking medium. 1.1.2 Test Method B-W covers autoclave tests at 121 °C on bottles partially filled with distilled water as the attacking medium. 1.1.3 Test Method P-W covers autoclave tests at 121 °C on powdered samples with pure water as the attacking medium. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Resistance of Glass Containers to Chemical Attack

ASTM C148-17(2022) 玻璃容器偏振检验的标准试验方法

1.1 These test methods describe the determination of relative optical retardation associated with the state of anneal of glass containers. Two alternative test methods are covered as follows: Sections Test Method A—Comparison with Reference Standards Using a Polariscope 6 – 9 Test Method B—Determination with Polarimeter 10 – 12 1.2 Test Method A is useful in determining retardations less than 150 nm, while Test Method B is useful in determining retardations less than 565 nm. NOTE 1—The apparent temper number as determined by these test methods depends primarily on (1) the magnitude and distribution of the residual stress in the glass, (2) the thickness of the glass (optical path length at the point of grading), and (3) the composition of the glass. For all usual soda-lime silica bottle glass compositions, the effect of the composition is negligible. In an examination of the bottom of a container, the thickness of glass may be taken into account by use of the following formula, which defines a real temper number, TR, in terms of the apparent temper number, TA, and the bottom thickness, t: TR 5 TA~0.160 ⁄ t!, where t is in inches, or TR 5 TA~4.06 ⁄ t!, where t is in millimetres. This thickness should be measured at the location of the maximum apparent retardation. Interpretation of either real or apparent temper number requires practical experience with the particular ware being evaluated. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Methods for Polariscopic Examination of Glass Containers

T/CASMES 44-2022 汽车车灯非球面玻璃透镜预制棒

本文件规定了汽车车灯非球面玻璃透镜预制棒（以下简称“预制棒”）的要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于汽车车灯使用的非球面玻璃透镜预制棒。

Automotive headlamp aspheric glass lens prefabricated rod

T/CASMES 42-2022 光功率分路器用玻璃毛细管预制棒

本文件规定了光功率分路器用玻璃毛细管预制棒（以下简称“预制棒”）的产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于光功率分路器用的玻璃毛细管预制棒。

Prefabricated glass capillary bars for optical power distributors

T/LAPRA 104-2022 玻璃容器 白酒瓶

本文件规定了白酒玻璃瓶的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运 输和贮存等要求。

Glass containers—Chinese spirits bottle

T/ZZB 2708-2022 化妆品包装用玻璃瓶

本文件规定了化妆品包装用玻璃瓶产品分类及结构、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存以及质量承诺。 本文件适用于化妆品包装用玻璃瓶。

Glass bottles for cosmetic packaging